Figures
Abstract
Parrots and corvids show outstanding innovative and flexible behaviour. In particular, kea and New Caledonian crows are often singled out as being exceptionally sophisticated in physical cognition, so that comparing them in this respect is particularly interesting. However, comparing cognitive mechanisms among species requires consideration of non-cognitive behavioural propensities and morphological characteristics evolved from different ancestry and adapted to fit different ecological niches. We used a novel experimental approach based on a Multi-Access-Box (MAB). Food could be extracted by four different techniques, two of them involving tools. Initially all four options were available to the subjects. Once they reached criterion for mastering one option, this task was blocked, until the subjects became proficient in another solution. The exploratory behaviour differed considerably. Only one (of six) kea and one (of five) NCC mastered all four options, including a first report of innovative stick tool use in kea. The crows were more efficient in using the stick tool, the kea the ball tool. The kea were haptically more explorative than the NCC, discovered two or three solutions within the first ten trials (against a mean of 0.75 discoveries by the crows) and switched more quickly to new solutions when the previous one was blocked. Differences in exploration technique, neophobia and object manipulation are likely to explain differential performance across the set of tasks. Our study further underlines the need to use a diversity of tasks when comparing cognitive traits between members of different species. Extension of a similar method to other taxa could help developing a comparative cognition research program.
Citation: Auersperg AMI, von Bayern AMP, Gajdon GK, Huber L, Kacelnik A (2011) Flexibility in Problem Solving and Tool Use of Kea and New Caledonian Crows in a Multi Access Box Paradigm. PLoS ONE 6(6): e20231. https://doi.org/10.1371/journal.pone.0020231
Editor: Warren H. Meck, Duke University, United States of America
Received: February 10, 2011; Accepted: April 13, 2011; Published: June 8, 2011
Copyright: © 2011 Auersperg et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: Involved in funding the kea studies were the FWF; Fond zur Förderung der Wissenschaftlichen Forschung in Österreich (Project 19087 to Ludwig Huber) as well as the EU (ERC grant SOMACCA to T. Fitch). The crow studies presented were supported by the ESF; European Science Foundation. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Cognitive mechanisms evolve to a large extent in response to selective pressures peculiar to each species’ ecology, physiology and morphology [1]. Because of this, cognitive processes may differ qualitatively and quantitatively across species.
One important tool of comparative cognition is to analyze the performance of different species facing the same task. However, if two species are to be compared on the basis of their final performance on a single task then task-specific factors may lead to differences that are not indicative of general problem-solving ability but are instead expressing different motivational predispositions or other non-cognitive specialisations.
A well-argued response to this problem is using a battery of different tasks rather than a single one [2]–[6]. It is also essential to use a sufficiently diverse set of tasks. For instance, comparing tool-using and non-tool using species only in tool-using tasks and reaching conclusions in terms of problem-solving ability would make little sense, as would using only tasks that favour proactive rather than passive solutions.
We then start from the premise that focusing on species-specific mechanisms and on the strategies that underlie problem-solving performance in a diversity of contexts is more informative than attempts to rank individuals or species on problem-solving success without due reflection on the cognitive demands of the tasks employed. This logic could be followed by offering several tasks simultaneously and by successively removing the options that have already been mastered. A survey of discrepancies between species of which tasks are approached first, how many solutions are discovered, how quickly the species re-learn, overcome habits and adapt to changes by switching between different solutions, may expose factors influencing species-specific traits such as behavioural flexibility, neophilia, exploration strategy, attention, motivation, affordance learning, anatomical constraints and other traits of interest. Apparatuses offering different physical problems at the same time have been used in various experiments targeting intra-specific social learning (rather than technical competence) eg. [7]–[10], but to our knowledge, have not been used for inter-specific comparisons of the mechanisms underlying problem solving.
We applied this approach to two highly competent extractive foragers: a parrot (the kea, Nestor notabilis) and a corvid (the New Caledonian crow, Corvus moneduloides). These birds are both representatives of two avian families that stand out for having larger encephalization quotients [11]–[13] and greater innovation scores [14]–[16] than other avian taxa, and that seem to parallel the great apes in performance in some physical tasks [17]–[26]. Kea are neophilic mountain parrots of New Zealand with well-known manipulative skills that are not known to use tools in the wild, while New Caledonian crows are known for their tool manufacture and use in the wild [27]–[29]. Both species are renowned for their problem solving skills in various physical cognition tasks [8], [17], [18], [20], [23]–[26]; [30]–[32]. Both species are generalists that live in social groups and within complex environments with fluctuating resources and pursue a food extracting foraging style, kea digging for roots in the ground of mountain plains and crows fishing for larvae in decaying tree logs [27], [29], [33]. Our captive kea had also shown competence in the use of compact objects, such as wooden blocks, as tools to access rewards [18], [30]. This gives us an opportunity to disentangle various possible cognitive and non-cognitive factors influencing differential performance in problem solving in a natural tool user as well as a naturally non-tool using species.
One of the issues that motivate our study concerns the evolution of tool use and its cognitive underpinnings, in particular whether there is something special about the cognition associated with tool use and other forms of complex object manipulation. For example, it is possible that adaptive specialization to a given type of tool use may either enhance or impair performance in other tool-related or object-manipulation tasks. It has been argued, that while tool-related behavior may not necessarily be more cognitively demanding than other forms of problem-solving, it may be more revealing of the information-processing that it involves, and hence may be useful to expose what animals understand about the relationship between objects and the effects objects have on one another [33]. So far researchers have attempted to experimentally determine the role of factors such as pre-functional development [28], [34] (associative) experience, affordance learning [24], self-control, planning and reasoning about invisible forces [35]. Here we focus on how the specificity of tasks determines differential performance in a comparative setting.
We developed a “Multi Access Box” (MAB), as a tool to compare problem solving in extractive foraging species. The MAB features a battery of tasks that all lead to the same goal, a food reward presented in the centre of a transparent box. Initially the subject is allowed to choose any of the four options, but once a subject has developed a consistently successful performance with each technique to access the food, this solution is blocked and we record its performance in establishing competence in an alternative strategy. Six kea and five crows were exposed to this setup, where two of the tasks required the use of a mediating object as a tool (either a stick or a ball). The other two solutions did not require tool use and involved either pulling a string tied around the reward or pulling from a hook handle to open a window.
Results
First Session
There were differences in the way kea and crows behaved towards the apparatus (see apparatus in Figure 1), and this translated in differences in the number of solutions discovered (namely used successfully at least once) within the first session. Averaging across individuals, NCCs found 0.75 (Range 0–1) and kea 2.33 (Range 2–3) solutions within the first session (see Figure 2). Also within the first session, all kea touched (i.e. made physical contact with) all four opening devices and both tool types, while the NCCs rarely touched the apparatus (except the string). The crow Annie-Claude was excluded from testing after failing to retrieve the food reward within the time given during the habituation phase.
Notice the four exchangeable transparent walls with openings corresponding to the 4 possible solutions (string, window, ball and stick). Dimensions in cm.
A) Mean number of first discoveries throughout sessions (the last discovery was the window solution by the NCC Uek in session 13). Kea are represented by the green line; NCC by the red. B) Mean number of trials until a solution was discovered. Green = kea; red = NCC. T-bars represent SE.
Entrance Manipulations
The kea directly manipulated the opening devices more often than the crows did in the course of this study: When repeated touchings are considered, the mean percentages of trials in which five or more manipulations of an entrance occurred were 18% +/−1.92 SE, N = 6 in the kea than in the crows (Mann-Whitney U test; Z = 2.34; p = 0.01). Entrance manipulations by the crows consisted almost exclusively of brief pecking actions at the openings with the beak tip or with a tool, while the kea’s manipulations included violent pulling and tearing as well as rocking, probing, scratching, and levering of the physical parts of the apparatus.
Sequence of solutions discovered and established
After an initial period distributing their attention broadly around the apparatus, all subjects, kea and crows, focussed on the string option. After the string solution was blocked, the subsequent order of solutions established differed between the two species and, in kea, between individuals (see Table 1).
Three NCCs next reached criterion using the stick tools (between session 4 and 12) and, when this option was blocked, two of these reached criterion with the ball tool (in sessions 8 & 13; see Table 1). Finally, one of these two crows (Uék) solved the window hook task. In many cases the crows touched the window (which could not be opened that way) with a stick, rather than trying to pull the hook. On average 31.77% +/−8.00 SE, N = 3 of the ineffective tool actions (ITA = inserting or bringing the tool into contact with an inappropriate opening; note that in an ITA a tool has to touch an opening and not just any part of the apparatus) in the trials in which the crows finally used a tool to retrieve the reward were directed against the window option. In fact, after learning to open the window by pulling from the hook, Uék always reached for a stick and used it to poke the reward out, instead of sticking her head through the window and taking the reward directly, as the kea did (see Movie S2).
The kea met criterion in either the ‘ball’ or the ‘window’ option after the string solution was blocked (all kea finished these three solutions). After these options were closed as well, all attempted to use a stick tool, touching the box several times at the appropriate side with the stick (i.e. carrying the tool to the correct opening and touching it with the tool), but failed to insert it. Only one kea, Kermit, succeeded in developing a successful technique to retrieve the reward with the stick. Due to the curvature of their beaks, kea cannot hold a stick in alignment with their heads to the same degree as New Caledonian crows and as a consequence have less control over the tip of the tool. Kermit developed a special routine. He (1) took the tool end laterally into his beak and pushed that end into or against the tool entrance. (2) He then switched from grabbing the stick with the beak to grabbing it with the foot, continuing to press the tool end against the opening, (3) Meanwhile he shifted the beak to the end of the tool that was distal to the opening securing the tool’s position with the foot at the tool entrance. Finally (4) he directed the tool through the opening with his beak and manoeuvred it until it hit the reward (see Movies S1, S2). Kermit successfully used the stick tool for the first time three sessions after all other openings had been closed (in session eight) and reached criterion in session ten.
Speed in switching from one solution to the next
The kea tended to be faster than the NCCs at meeting criterion in new solutions once the previous method was blocked. They took less sessions on average (1.3 +/−0.21 SE, N = 6) to switch from the first to the second option than the three crows that did master a second option (which took 4, 11 and 2 sessions; Mann-Whitney U test; Z = 2.19; p = 0.048). The kea took on average 1.67 +/−0.21 SE, N = 6 sessions to switch from option 2 to option 3 while the two crows that mastered a third option, took 4 and 5 sessions respectively (Mann-Whitney U test; Z = 2.145; p = 0.071). Only one subject of each species mastered a fourth option. The crow took 4 sessions to reach criterion from the ball (3rd option) to the window (4th option), while the kea took 5 sessions to reach criterion from the ball option (3rd option) to the stick (4th option; see Table 1). Establishing the stick solution after the string solution had been blocked, took the three successful crows 5.8 sessions on average even though the task taps into their proven skills as natural tool users (Table 1 & Figure 2).
Tool preference and other analyses related to the tool solutions
The crows only successfully used the thin sticks and the single successful kea used only the thick sticks. Both species used both sizes of ball tools.
After the string opening had been blocked, the mean number of times the kea brought a ball tool into contact (by touch or insertion) with the apparatus’s openings was significantly higher than with a stick (Wilcoxon signed-rank; T = 2.02; p = 0.043). After the ball option was blocked, balls were removed after three unsuccessful sessions in which all options except for the stick option were blocked for 5 of the 6 kea, because they continued to make attempts to use these now non-functional objects as tools. Nevertheless, no additional kea managed to reach the food with a stick. For the crows the reverse situation was true; they tended to touch openings with the sticks more often than with the balls. However, this was only significant at the 6% level (Wilcoxon signed-rank; T = 1.87; p = 0.06).
The three crows that did reach criterion using tools tried to insert the stick more often into openings than the six kea (Mann-Whitney U test; Z = 2.59; p = 0.01) whilst the kea combined the ball more often than the crows (Mann-Whitney U test; Z = 1.9; p = 0.05).
We find similar preferences looking only at trials in which ineffective tool actions occurred (see Figure 3). The kea brought the ball more often into contact with an inappropriate opening (excluding trials in which the performance was immediately successful) than the NCCs (Mann-Whitney U test; Z = 2.32; p = 0.024).
In trials including ITAs, the kea also inserted the ball into openings such as the string or the stick opening rather than the window, while the NCCs also touched the window opening frequently with a stick tool (see Figure 3). In incorrect tool use trials, in which the animals conducted ineffective ITA before succeeding to insert the tool appropriately, the average number of ITA per trial was similar in crows and kea (see Table 2).
Discussion
At least one individual of each species discovered all four available methods. This proves that in principle, the affordances of the tasks lay within the cognitive and physical capacity of both species.
There were, however, interesting differences in performance with the present set of tasks. The kea were faster in discovering multiple solutions and showed more individual variation than the naturally tool-using NCCs. Within the first session, all kea successfully employed at least two or three solutions while none of the crows used more than one. The kea also switched to other solutions quicker once previously mastered solutions were blocked. Although both species had experience with compact objects [18], [24], [30], using the ball was acquired faster by the kea, while in the stick option the naturally stick-tool using NCCs were faster. Only one kea succeeded in inserting the stick tool into the correct opening, although all attempted to do so.
To a large extent, differences in exploration patterns and affordance learning as well the balance between neophilia/neophobia seem to be responsible for the differential performance. The kea showed more haptic exploration while the crows, probably due to their higher level of neophobia, seemed to explore more in a visually guided manner. Similar differences exist between kea and common ravens [36]. The kea’s higher readiness to manipulate i.e. act on novel objects, may help them to detect functional affordances. In their naturally low-risk, variable environment, neophilia may reflect low predation risk [20], [37]. The crows, in contrast, approached the apparatus hesitantly, and touched it less often than the kea. Two crows never explored the box thoroughly with their beaks. One of them had to be excluded from the study because it never approached the experimental setup. Neophobia hampered the crows’ performance in other respects. For instance, despite their predisposition, experience and competence for stick tool use, the crows did not use the available tools as first option and also took some time to use tools after the string pulling option had been removed. (The string option was the first to be blocked for both species. It may have represented one of the more conspicuous affordances of the apparatus or evoked little neophobia since both species were familiar with strings; see methods). It is possible that because the available sticks were smoother, painted, and considerably thicker than those the crows naturally choose in the wild [38] ergonomic difficulties synergised with neophobia, and may have affected their performance. Once the crows had established stick tool use, they continued to use the sticks for exploring the box instead of touching it directly. This is reflected in the number of ITA with sticks when confronted with the ball and window option, i.e. after the stick option was blocked. This may indicate a preference to explore unfamiliar objects with tools rather than touching them directly, as shown by Wimpenny et al. (2010) [39]. Such behaviour is, however, disadvantageous in situations where the functionalities of the objects are not detectable by simply applying pressure, such as in the case of the window option, illustrating one cost of the otherwise useful capacity to use tools for exploratory goals.
Another strong difference was that the kea showed greater destructiveness than the crows, as a consequence of their forceful and frequent use of pulling and tearing actions. One kea, Luke, even broke the Plexiglas® on the top of the box while trying to force it open, and most kea attempted to turn over the MAB, which had to be fixed to the aviary floor. Wild kea are well-known for what human observers usually describe as curiosity, playfulness and urge to tear apart objects such as cars’ windshield wipers or picnic baskets [27].
Wild (as well as naïve captive) NCCs also use tearing actions when manufacturing tools from pandanus leaves [29], [40]. They however did not use such behaviours in this setup. We can at this point speculate that tearing behaviours may mainly be orientated towards tool making and nest building rather than to exploration of novel objects or food extraction. The slight curvature at the beak tip of most corvids has been interpreted as an adaptation to feeding on carcasses [41]. NCCs might have secondarily lost their beak curvature making their beaks less suited for violent tearing actions. Very recently Rutz et al. (2010) [42] were able to show that a substantial amount of the crows’ protein and lipid intake came from wood boring beetle larvae obtained with stick tools, also indicating that explorative foraging is more concentrated on probing actions. It seems therefore possible that the range of exploration techniques during foraging in NCC may be constrained by the adaptive specialization for tool use and that this will affect the “zone of latent solutions” [43] within the species' cognitive repertoire.
Our results also provide the first experimental evidence of stick tool use in a parrot. Kea are neither natural tool users like New Caledonian crows, nor do they construct nests with twigs as all corvids do, thus lacking the predisposition of nest builders for handling twigs and other elongated stick-like objects [44]. Instead, kea use or dig burrows for laying their eggs [45]. Also importantly, ergonomically, the use of sticks is clearly difficult for kea. The curvature of their beaks and pronounced size difference between upper and lower beak, precludes a good grip and control of long, straight tools. NCCs, maybe as an adaptation to tool use [41], have short straight beaks with the mandible almost as long as the maxilla, allowing them to effectively hold sticks directly forwards, functionally elongating their beaks and increasing their reach.
To overcome these difficulties, the single successful individual kea developed a complicated stepwise technique, involving carefully concerted foot and bill actions (see Movie S1). This permitted the subject to insert and direct a stick tool despite the species’ morphological constraints. Kermit’s performance indicates a high degree of deliberate control over his movements, suggestive of anticipation of their effect and perhaps a representation of the goal action, i.e. of inserting the stick into the opening. Proof of goal directedness or goal representation, however, requires specific tests that were not implemented here [46].
Our study illustrates the difficulties of comparative cognition research and points to some partial solutions. Clearly, no single-task exploration can be used to assess problem-solving ability or make claims for advanced general intelligence or innovativeness. This caveat applies to within as well as between species comparisons. Problem solving is intrinsically multi-dimensional and it is to be expected that individuals or species will outperform each other in different dimensions. Batteries of tasks designed with this in mind may however be highly informative about the different predispositions and cognitive competences across individuals and species.
Methods
Subjects
Six male kea (Frowin, Kermit, Pick, Tammy, Bruce and Luke), as well as five New Caledonian crows (Boycott, Annie-Claude, Tino, Ebony and Uék), two of which were male (Boycott and Tino) participated in this study. Three kea (Kermit, Pick and Tammy) as well as one crow (Uek) were hand-raised. Bruce, Luke and Frowin were parent-raised in captivity; Annie-Claude, Tino, Ebony and Boycott were wild caught but had laboratory experience. Bruce and Luke were seven, Frowin, Pick and Kermit five, Tammy three and Uek, five years old. All subjects had experience in experimental problem-solving setups substantially different from that used here [8], [17], [18], [24], [30], [47], [48]. The NCC had participated in a test where they dropped stones into vertical tubes [24]. Kea also inserted objects into vertical tubes (unpublished data) and participated in follow up tool-use experiments with loose rewarded tubes or tubes in a slanted position and compact tools [18], [30]. Both the NCC and the kea had experiences with strings: the kea had participated in a vertical string-pulling task [32, and unpublished data] and the crows were given experience, pulling 30 cm long strings (of different colour and diameter as during testing) up a perch prior to a yet unpublished study. The crows had experience with stick tools within experimental and natural contexts.
The kea were housed in a large outdoor aviary (15 m ×10 m ×4 m) in a group totalling 20 kea, while the crows were kept in pairs in outdoor aviaries of various shapes, with an average volume of approximately 50 m3 and access to heated indoor divisions (ca. 8 m3), with food and drinking water ad libitum. The experiments were strictly non-invasive and based purely on behavioral tests. All subjects were housed in accordance with Austrian and German law.
Apparatus
We designed and used a Multi-Access-Box (MAB) consisting of a cubic box (23 cm by side; for details and further dimensions see Figure 1, see additionally Figures S1, S2, S3, S4, S5; Movie S2) with four exchangeable transparent walls (the dimensions were adequate for both species). Each wall contained an opening that could be used to access a food reward presented in the centre of the box, either directly or by means of a tool. The food reward (half a peanut in its shell for the kea; a mealworm inside half a peanut shell for the NCC) was positioned on a vertical pole in the centre of the box, which was attached to a slanted platform. Once the food fell off the pole it rolled down the platform and out of the box.
There were four possible solutions (‘string’, ‘window’, ‘ball’ and ‘stick’) through which the out-of-reach food could be obtained, two of which (‘ball’ and ‘stick’) involved the use of tools. (i) The ’string’ solution required the subjects to pull a string (20 cm) hanging out of the opening in the respective wall, the other end of which was tied to the reward. (ii) In the ‘window’ option, a hinged window in the sidewall of the box could be opened by grasping a hook-like handle with the beak, pulling he window open and thereafter reaching into the box to retrieve the food from the pole (or pushing it off the pole with a stick). (iii) To exploit the ‘ball’ option, a compact object (a marble) had to be inserted into the respective opening, which connected to a transparent tube bending towards the central pole. When inserted into the tube the ball rolled down the chute and knocked the reward off the pole. (iv) Finally, the opening corresponding to the ‘stick’ solution was connected to a (8 mm) short straight horizontal tube at the same height as the food, but with a ten centimetre gap to the pole (Figure 1). Here, the food could be obtained by inserting a stick tool in the correct, hence unobstructed, opening, manoeuvring it towards the pole and hitting the peanut (kea) or stuffed peanut shell (NCCs).
All openings except for the window had the same round shape and diameter, hence were superficially perceptually similar, but could be distinguished by the visible internal structure (see Figure 1). Four sticks (15 cm long) and four balls, all painted with yellow childproof acrylic varnish, were provided in two different sizes. Two of the four supplied sticks were broad and two thin (0.5 cm and 1,5 cm in diameter respectively), whilst the balls were two large and two small marbles. The potential tools were placed in the four corners of the MAB so that each corner had one stick and one marble (the possible combinations of tool diameters were randomly assigned). The MAB was turned around before each trial and the walls were switched; so that the openings were at randomly changing positions.
Experimental procedure
Prior to the start of the actual tests, the birds received at least four familiarization trials, in which each of the walls was missing once so the birds could just reach into the box and take the food reward. The crows, which are more neophobic than the kea, received as many familiarization trials as necessary to recover the reward in less than three minutes.
During testing, subjects were visually isolated from their group/mates and received a maximum of ten trials per session. A trial continued until the reward was recovered or until ten minutes had passed. If an animal did not obtain the reward within ten minutes testing continued the following day. A trial was scored as correct if the bird obtained the reward by applying one of the four solutions described above without prior unsuccessful attempts to solve the problem in a different way, e.g. previously manipulating other openings or combining the tools with wrong openings. The first successful retrieval of the food from a new opening (the bird may have manipulated other entrances in the same trial) was scored as a ‘discovery’.
Initially all openings were available. Once a subject reached criterion for one solution (obtaining the reward by always using the same solution for two consecutive sessions, but also after nine correct trials within one session (of ten trials) or eight consecutive correct trials using the same solution within one session), the respective opening was blocked (the window was cemented into its frame, the string was removed and the tool entrances were blocked with a wooden stopper), so as to force the subject to shift to other solutions. Testing continued until the animals failed to recover the reward within ten minutes in three consecutive trials or until all openings were closed. In order to determine whether each species had the capacity for each tool option, if just one of the two tool openings remained open, and the birds failed to solve it three consecutive times, we gave them a ‘second chance’ (another three trials) and removed the tools that belonged to the tool task they had previously solved, so as to remove possible distracting factors. We reasoned that the birds may fail to solve a tool task simply because they might not be able to inhibit using a tool which has been strongly associated to food before.
All data was videotaped. We used SPSS for statistical analysis.
Supporting Information
Movie S1.
This video shows the complex motor technique used by the male kea Kermit to insert the rod shaped tool into the appropriate opening as described in the results section.
https://doi.org/10.1371/journal.pone.0020231.s001
(AVI)
Movie S2.
This ‘Kea-crow suite movie’ shows both species, kea and New Caledonian crows, employing all four different solutions of the Multi Access Box apparatus: string, ball, stick and window. The video illustrates the techniques used to employ the fourth and final solution of the two animals, the kea Kermit and the crow Uek, that mastered all tasks: the crow Uek uses a tool to poke the reward off its platform after opening the window solution and the kea Kermit uses a complex multi step technique to insert the stick tool into the appropriate opening (as described in detail in the results section).
https://doi.org/10.1371/journal.pone.0020231.s002
(M4V)
Figure S1.
This image depicts a kea inserting a ball tool into the appropriate opening.
https://doi.org/10.1371/journal.pone.0020231.s003
(JPG)
Figure S2.
This image depicts a New Caledonian crow inserting a ball tool into the appropriate opening.
https://doi.org/10.1371/journal.pone.0020231.s004
(JPG)
Figure S3.
This image depicts the crow Uek retrieving the reward from the window opening using a stick tool.
https://doi.org/10.1371/journal.pone.0020231.s005
(JPG)
Figure S4.
This image depicts a kea opening the window solution.
https://doi.org/10.1371/journal.pone.0020231.s006
(JPG)
Figure S5.
This image depicts a kea inserting the stick tool into the appropriate opening.
https://doi.org/10.1371/journal.pone.0020231.s007
(JPG)
Acknowledgments
We would like to thank Lukas Auersperg for technical support in constructing and drawing the apparatus and Sabine Tebbich for useful comments on a previous version of the manuscript.
Author Contributions
Conceived and designed the experiments: AA AB GG. Performed the experiments: AA. Analyzed the data: AA. Contributed reagents/materials/analysis tools: AA AB GG. Wrote the paper: AA AB GG LH AK.
References
- 1.
Shettleworth SJ (2009) Cognition, Evolution, and Behavior. Second edition. New York: Oxford University Press.
- 2. Balda RP, Kamil AC (1989) A comparative study of cache recovery by three corvid species. Animal Behaviour 38: 486–495.
- 3. Bitterman ME (1965) The evolution of intelligence. Scientific American 212: 92–100.
- 4. Herrmann E, Hernández-Llored MV, Call J, Hare B, Tomasello M (2010) The Structure of Individual Differences in the Cognitive Abilities of Children and Chimpanzees. Psychological Science 21: 102–110.
- 5.
Kamil AC (1988) A synthetic approach to the study of animal intelligence. In: Leger DW, editor. Comparative Perspectives in Modern Psychology: Nebraska Symposium of Motivation. Vol. 35. Lincoln. NE. University of Nebraska Press. pp. 230–257.
- 6.
Lefebvre L, Giraldeau L (1996) Is social learning an adaptive specialization? In: Heyes CM, Galef BG, editors. Social Learning in Animals: the roots of culture. St Diego: Academic Press. pp. 107–128.
- 7. Bugnyar T, Huber L (1997) Push or pull: an experimental study on imitation in common marmosets (Callithrix jacchus). Animal Behaviour 54: 817–831.
- 8. Huber L, Rechberger S, Taborsky M (2001) Social learning affects object exploration and manipulation in keas, Nestor notabilis. Animal Behaviour 62: 945–954.
- 9. Dawson BV, Foss , BM (1965) Observational learning in budgerigars. Animal Behaviour 13: 470–474.
- 10. Whiten A, Custance DM, Gomez J-C, Texidor P, Bard KA (1996) Imitative learning of artificial fruit processing in children (Homo sapiens) and chimpanzees (Pan troglodytes). Journal of Comparative Psychology 110: 3–14.
- 11. Emery NJ, Clayton NS (2004) The mentality of crows: convergent evolution of intelligence in corvids and apes. Science 306: 1903–1907.
- 12. Emery NJ (2006) Cognitive ornithology: the evolution of avian intelligence. Philosophical Transactions of the Royal Society B 361: 23–43.
- 13.
Striedter GF (2005) Principles of Brain Evolution. Sunderland, MA: Sinauer Associates.
- 14. Lefebvre L, Whittle P, Lascaris E, Finkelstein A (1997) Feeding innovations and forebrain size in birds. Animal Behaviour 53(3): 549–560.
- 15. Tebbich S, Sterelny K, Teschke I (2010) The tale of the finch: adaptive radiation and behavioural flexibility. Philosophical Transactions of the Royal Society B 365: 1099–1109.
- 16. Overington SE, Boogert NJ, Morand-Ferron J, Lefebvre L (2009) Technical innovations drive the relationship between innovativeness and residual brain size in birds. Animal Behaviour 78: 1001–1010.
- 17. Auersperg AMI, Gajdon GK, Huber L (2009) Kea consider spatial relationships between objects in the support problem. Biology Letters 5: 455–458.
- 18. Auersperg AMI, Gajdon GK, Huber L (2010) Kea (Nestor notabilis) produce dynamic relationships between objects in a second order tool use task. Animal Behaviour 80(5): 783–789.
- 19. Bird CD, Emery NJ (2009) Insightful problem solving and creative tool modification by captive rooks. Proc Natl Acad Sci USA 106: 10370–1037.
- 20. Huber L, Gajdon GK (2006) Technical intelligence in animals: the kea model. Animal Cognition 9: 295–305.
- 21.
Pepperberg I (1999) The Alex Studies. Harvard University Press.
- 22. Tebbich S, Seed AM, Emery N, Clayton NS (2007) Non-tool-using rooks, Corvus frugilegus, solve the trap-tube problem. Animal Cognition 10(2): 225–231.
- 23. Taylor AH, Hunt GR, Holzhaider JC, Gray RD (2007) Spontaneous metatool use by New Caledonian crows. Current Biology 17: 1504–1507.
- 24. von Bayern AMP, Heathcote RJP, Rutz C, Kacelnik A (2009) The Role of Experience in Problem Solving and Innovative Tool Use in Crows. Current Biology 19(22): 1965–1968.
- 25. Weir AAS, Chappell J, Kacelnik A (2002) Shaping of hooks in New Caledonian crows. Science 297: 981.
- 26. Wimpenny JH, Weir AAS, Clayton L, Rutz C, Kacelnik A (2009) Cognitive Processes Associated with Sequential Tool Use in New Caledonian Crows. PLoS ONE 4(8): e6471.
- 27.
Diamond J, Bond AB (1999) Kea, Bird of Paradox: The Evolution and Behavior of a New Zealand Parrot. Berkeley, CA: University of California Press.
- 28. Kenward B, Rutz C, Weir AAS, Kacelnik A (2006) Development of tool use in New Caledonian crows: inherited action patterns and social influence. Animal Behaviour 72: 1329–1343.
- 29. Hunt GR (1996) Manufacture and use of hook-tools by New Caledonian crows. Nature 379: 249–251.
- 30. Gajdon GK, Aman L, Huber LKeas rely on social information in a tool use task but abandon it in favour of overt exploration. Interaction Studies. In press.
- 31. Taylor AH, Hunt GR, Medina FS, Gray RD (2009) Do New Caledonian crows solve physical problems through causal reasoning? Proceedings of the Royal Society, London B 276: 247–254.
- 32. Werdenich D, Huber L (2006) A case of quick problem solving in birds: string-pulling in keas (Nestor notabilis). Animal Behaviour 71: 855–863.
- 33. Bluff LA, Weir AAS, Rutz C, Wimpenny JH, Kacelnik A (2007) Tool-related cognition in New Caledonian crows. Comparative Cognition & Behavior Reviews 2: 1–25.
- 34. Tebbich S, Taborsky M, Fessl B, Blomqvist D (2001) Do woodpecker finches acquire tool-use by social learning? Proceedings of the Royal Society B 268: 2189–2193.
- 35. Emery NJ, Clayton NS (2009) Tool use and physical cognition in birds and mammals. Current Opinion in Neurobiology 19: 27–33.
- 36. Schloegl C, Dierks A, Gajdon GK, Huber L, Kotrschal K, et al. (2009) What You See Is What You Get? Exclusion Performances in Ravens and Keas. PLoS ONE 4: e6368.
- 37. Greenberg R, Mettke-Hofmann C (2001) Ecological aspects of neophobia and neophilia in birds. Current Ornithology 16: 119–178.
- 38. Bluff L, Kacelnik A, Rutz C (2010) Vocal culture in New Caledonian crows. Biological Journal of the Linnean Society 101: 767–776.
- 39.
Wimpenny J (2010) New Caledonian crows use tools for non-foraging activities. Animal Cognition. DOI:https://doi.org/10.1007/s10071-010-0366-1.
- 40. Kenward B, Weir AAS, Rutz C, Kacelnik A (2005) Tool manufacture by naive juvenile crows. Nature 433: 121.
- 41. Kulemeyer C, Asbahr K, Gunz P, Frahnert S, Bairlein F (2009) Functional morphology and integration of corvid skulls – a 3D geometric morphometric approach. Frontiers of Zoology 6: 2.
- 42. Rutz C, Bluff LA, Reed N, Troscianko J, Newton J, et al. (2010) The Ecological Significance of Tool Use in New Caledonian Crows. Science 329(5998): 1523–1526.
- 43. Tennie C, Call J, Tomasello M (2009) Ratcheting up the ratchet: on the evolution of cumulative culture. Philosophical Transactions of the Royal Society B 364: 2405–2415.
- 44. Hansell M, Ruxton G (2008) Setting tool use within the context of animal construction behaviour. Trends in Ecology and Evolution 23: 73–78.
- 45. Jackson JR (1963) The nesting of keas. Notornis 10: 319–326.
- 46. Heyes C, Dickinson A (1990) The intentionality of animal action. Mind and Language 5: 87–104.
- 47. Myiata H, Gajdon GK, Huber L, Fujita K (2010) How do kea solve artificial fruit problems with multiple locks. Animal Cognition 14(1): 45–58.
- 48. Liedke J, Werdenich D, Gajdon GK, Huber L, Wanker R (2010) Big brains are not enough: performance of three parrot species in the trap tube paradigm. Animal Cognition 14(1): 143–149.