Figures
Abstract
Wolbachia are wide-spread, endogenous α-Proteobacteria of arthropods and filarial nematodes. 15–75% of all insect species are infected with these endosymbionts that alter their host's reproduction to facilitate their spread. In recent years, many insect species infected with multiple Wolbachia strains have been identified. As the endosymbionts are not cultivable outside living cells, strain typing relies on molecular methods. A Multi Locus Sequence Typing (MLST) system was established for standardizing Wolbachia strain identification. However, MLST requires hosts to harbour individual and not multiple strains of supergroups without recombination. This study revisits the applicability of the current MLST protocols and introduces Allele Intersection Analysis (AIA) as a novel approach. AIA utilizes natural variations in infection patterns and allows correct strain assignment of MLST alleles in multiply infected host species without the need of artificial strain segregation. AIA identifies pairs of multiply infected individuals that share Wolbachia and differ in only one strain. In such pairs, the shared MLST sequences can be used to assign alleles to distinct strains. Furthermore, AIA is a powerful tool to detect recombination events. The underlying principle of AIA may easily be adopted for MLST approaches in other uncultivable bacterial genera that occur as multiple strain infections and the concept may find application in metagenomic high-throughput parallel sequencing projects.
Citation: Arthofer W, Riegler M, Schuler H, Schneider D, Moder K, Miller WJ, et al. (2011) Allele Intersection Analysis: A Novel Tool for Multi Locus Sequence Assignment in Multiply Infected Hosts. PLoS ONE 6(7): e22198. https://doi.org/10.1371/journal.pone.0022198
Editor: Dan Zilberstein, Technion-Israel Institute of Technology, Israel
Received: March 1, 2011; Accepted: June 21, 2011; Published: July 15, 2011
Copyright: © 2011 Arthofer et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: The work presented here was supported by the Austrian Science Fund Project FWF P19206-B17 (http://www.fwf.ac.at/) and the COST Action FA0701 (http://www.cost.esf.org/). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Wolbachia are obligatory endosymbiotic α-Proteobacteria found in 15–75% of all insect species worldwide [1]–[4], in many other arthropods and filarial nematodes [5], [6]. The bacteria are usually transmitted by maternal inheritance and have developed sophisticated methods to manipulate host reproductive systems in order to increase the rate of infected female offspring. These alterations include cytoplasmic incompatibility (CI), thelytokous parthenogenesis, male killing and feminisation [7]–[11]. The wide range of infected species suggests an ability of Wolbachia to spread horizontally to new hosts [12], [13]. Their potential for horizontal transmission, combined with high maternal transmission efficiencies and low levels of endosymbiont loss by environmental curing [14], as well as the emergence of novel strains due to recombination [15]–[18] are expected to contribute to an accumulation of Wolbachia strains in individual hosts. Multiple infections by Wolbachia are commonly found: up to eight distinct strains have been isolated from individual hosts [19], and for 28 out of 111 species listed currently in the MLST database (see below) more than one Wolbachia strain is described. The fruit fly Rhagoletis cerasi is an established field model harbouring three A-group (wCer1, wCer2, wCer4) and one B-group (wCer5) Wolbachia in high titre [20]–[22], with hints of an A/B recombinant strain (wCer3) in permanently low titre, traceable only by Southern transfer of PCR products and hybridization with a wsp specific probe [20].
Wolbachia have been assigned to eight supergroups, A to H, based on phylogenetic signals from the 16S rRNA gene and the genes ftsZ and wsp [5], [11], [23]–[25]. Most strains found in insects belong to supergroup A and B. Recombination within strains [16], between strains [15] and between supergroups [15], [11], [26] makes single gene typing approaches unsuitable for strain characterization, and for this reason, a Multi Locus Sequence Typing (MLST) system was introduced [27]. MLST is based on partial sequences of five ubiquitous housekeeping genes, gatB, coxA, hcpA, ftsZ and fbpA. The genes are amplfied using either standard primers amplifying strains from all supergroups or, alternatively, A- and B-group specific primers. The standard MLST protocol recommends direct sequencing of PCR products. In an online database (http://pubmlst.org/wolbachia/) a unique number is assigned to each identified allele so that any Wolbachia strain can be characterized by an individual, numeric code. The fast evolving and recombining wsp gene was not included, but serves as an optional typing marker for discrimination of closely related strains [28].
MLST for Wolbachia is a step forward in strain characterization but raises an important yet unresolved issue: the use of supergroup specific primers and direct sequencing is impractical in individuals that host more than one strain of the same supergroup due to ambiguous sequence reads [13]. Also, segregation of alleles by cloning and sequencing of plasmids does not resolve the assignment of alleles to individual strains. Thus, application of MLST is currently limited to individuals harbouring not more than one of each A- and B-group strain [13], [27].
Multiple infections can artificially be segregated by transinfection [22], [29], antibiotic treatment [30], [31] or cell culturing [32]. These techniques are technically challenging, laboursome and of uncertain outcome. In this study, we present a novel method, Allele Intersection Analysis (AIA), enabling correct assignment of MLST alleles retrieved from multiply infected individuals. AIA requires (a) the identification of the Wolbachia strains infecting a single individual (further referred to as ‘infection type’) using a highly variable marker gene and (b) the cloning and sequencing of MLST alleles from a pair of multiply infected individuals that share or differ in only one Wolbachia strain. By this, two sets of sequences, one from each individual, are generated. In the case of a shared Wolbachia strain, the allele found in both sets (the intersection) belongs to the shared strain; reciprocally, in the case that the pair differs in exactly one strain, its allele will be found exclusively in one set (the complement). Unresolved alleles are carried forward using other pairs of infection types until all the alleles have been assigned. Step (b) is performed independently for each MLST locus. Combinations of infection types that allow complete allele assignment are termed ‘informative’.
Material and Methods
Allele Intersection Analysis: Simulations
AIA depends on an informative combination of infection types. As the distribution pattern of informative among all possible type combinations does not follow simple mathematical equations, we simulated a species infected with n = [2 .. 7] Wolbachia strains and tested all possible combinations of k≤n infection types for informativeness. The test algorithm is outlined in figure 1: each infection type is considered as a set and the Wolbachia strains present in this infection type as the elements of the set. As a first step the entirety of all sets is checked for sets with a cardinality of 1 (a set containing only one element, equalling a single-infected individual; see Glossary S1 for a glossary on set theory terms). If such a set is identified, the element contained in it is considered fully resolved and removed from all sets, which are now termed ‘reduced sets’. Next, all possible pairs of (reduced) sets are explored for intersections (A ∩ B) or complements (A \ B and B \ A) with a cardinality of 1. If found, the contained element is removed from all reduced sets and the exploration of all possible remaining pairs is repeated. Two stop criteria will finish the loop of intersection or complement search and element removal: (a) no intersection or complement with a cardinality of 1 can be identified and the cardinality of the largest reduced set is still >1; in this case the type combination is not informative. (b) the cardinality of the largest reduced set drops to 1; in this case the type combination is informative and allows complete allele assignment. This algorithm is also implemented into the program TCinfo, which tests a manually entered combination. TCinfo is provided with the supplemental material of this paper (Computer Program S1: Windows® executable; Computer Program S2: source code).
Each infection type is considered as a set with the Wolbachia strains as its elements. All sets are checked for having a cardinality of 1. If such a set is identified, the element contained in it subtracted from all sets. Next, all possible pairs of sets are explored for intersections or complements with a cardinality of 1. If found, the contained element is subtracted from all sets and the exploration of all possible remaining pairs is repeated until no intersection or complement with a cardinality of 1 can be identified. If the cardinality of the largest remaining set is >1, the type combination is not informative; otherwise the type combination is informative and allows complete allele assignment.
To assess the power of AIA for detecting cryptic recombinations in which one complete MLST allele was exchanged between strains, we simulated a species infected with the Wolbachia strains A, B, C and R, assuming that R is a cryptic AxB recombinant that is misdiagnosed as A. An investigator not aware of the presence of strain R would screen this species for informative type combinations resolving A, B and C. Thus, we created all possible combinations that fulfil this criterion and searched them for combinations in which suspicious cloning results reveal the presence of R.
Insect samples and determination of infection types
In a preceding study [20], DNA of 83 R. cerasi pupae from eight European regions (PL, CZ, AU, CH, IT-North, IT-Sicily East, IT-Sicily West, PT; Table 1) were extracted using the Sigma GenElute Mammalian DNA extraction Kit (Sigma) following the protocol of the manufacturer. DNA was eluted in 50 µl TE (10 mM Tris, 1 mM EDTA, pH = 8.0) and stored at −20°C. In addition, 24 adult flies were collected from yellow sticky traps in May 2008 in an Eastern Austrian location (Neufeld, Burgenland) where all identified Wolbachia strains are present; DNA was extracted analogously. Transinfected C. capitata (44) DNA extracts from lines WolMed88.6 containing wCer2 and WolMedS10.3 containing wCer4 were kindly provided by Kostas Bourtzis (University of Ioannina, Greece). The infection type of all samples was determined by amplification of the wsp gene with specific primers as described in [20].
Allele Intersection Analysis: Practical approach
Four individuals, representing different infection types, were selected for AIA (Table 2): the single infected samples WolMed88.6 (wCer2) and WolMedS10.3 (wCer4), a double infected fly from Znojmo (CZ) (wCer1&4) and a triple infected fly from Horitschon (AT) (wCer1&2&5).
MLST PCR reactions were performed on a 2720 thermal cycler (Applied Biosystems) using 0.8 µl template DNA in a master mix containing 1× Mg-free buffer (Fermentas), 2 mM MgCl2, 100 µM dNTPs, 0.2 µM of each primer and 0.2 U Taq polymerase (Fermentas) with a total reaction volume of 10 µl. Standard MLST primers were used except for locus fbpA. The standard primers of this locus showed a weak amplification of wCer5 when high amounts of A-group strains were present in the template, and lead to loss of B-group sequences after cloning. Thus, fbpA was additionally amplified with B-group specific primers. Primer sequences and cycling conditions were used as suggested in the MLST established protocols (http://pubmlst.org/wolbachia). PCR products were purified with the peqGold Cycle Pure Kit (peqlab), eluted in 10 µl sterile water, and a 0.8 µl aliquot was ligated into the pTZ57R/T vector of the InsTAclone PCR cloning kit (Fermentas) according to the instructions of the manufacturer. The ligated plasmids were used for transformation of competent JM109 E. coli cells. For each individual and locus, 24 white colonies were picked, grown over night and plasmid DNA was extracted by alkaline lysis [33]. Insert size was determined by PCR with M13 forward and reverse primers and plasmids with correct insert sizes were Sanger sequenced by a commercial provider. Sequences were aligned with ClustalX [34], and based on the alignments the intersection steps for AIA were performed manually (Figure 2).
Alleles identified in a current step are underlined. Alleles identified in earlier steps are grey. Single infection step: The alleles of wCer2 and wCer4 can be readily assigned as single infected individuals WolMed88.6 and WolMedS10.3 are available. 1st intersection: All alleles in the double infected individual from Znojmo which are not wCer4 must be wCer1. 2nd intersection: All alleles in the triple infected individual from Horitschon which are neither wCer1 nor wCer2 must be wCer5. This procedure was performed individually for each MLST locus.
Strain bias
To determine whether standard MLST primers exhibit strain bias, DNA of a single female fly collected in Neufeld (AT) with confirmed quadruple infection was analyzed. Quantification of wCer load was carried out on a Rotorgene-Q PCR system (Qiagen) using 1× Qiagen SYBR Green Mastermix, 0.2 µl of strain specific wsp primers [20] and 1 µl template DNA in 10 µl total volume. Dilution series of plasmids carrying wCer1, wCer2, wCer4 and wCer5 wsp inserts with a concentration range from 101 to 10−3 ng/µl served as standard. The cycling scheme was 3 min initial denaturation at 95°C followed by 45 cycles of 95°C (10 sec), 55°C (15 sec) and 72°C (40 sec), and a melting curve acquisition from 60°C to 95°C with 0.2°C step width.
MLST PCR reactions and amplicon purification were performed as described above. All standard and B-group specific primers were used. PCR of wsp was carried out with primers wsp-81F/wsp-691R (unspecific) [23] and wsp-81F/wsp-522R (B-group specific) following the protocol in reference 25.
Cloning of purified PCR products was performed as described above, and after overnight growth 16 white colonies per ligation were picked for plasmid extraction. Plasmids with correct insert sizes were Sanger sequenced by a commercial provider. Based on the retrieved sequences, each plasmid was assigned to the corresponding strain. For each Wolbachia strain and MLST locus, the expected number of plasmids and the relative deviation between expected and observed plasmid frequency was calculated based on the relative strain load.
Results
Simulations
The number of possible infection types in an n-fold infected species is given byThe grouping of k≤n types allows a maximum possible number of type combinations equalling
Any type combination will be informative when k>n. The smallest k to provide an informative combination was two for n = [2,3], three for n = [4,6] and four for n = 7 (Table 3). The rate of informative combinations increases fast when k approaches n. Considering all k and n>2 tested, the rate of informative combinations lies between 60% (n = 4) and 80% (n = 7). Predictions for n>7 are constrained by available computing power. Figure S1 shows two examples of informative type combinations created in the simulation, and the intersections needed to assign all Wolbachia alleles to the correct strain.
The simulation of an A, B, C and R infected species resulted in 560 possible combinations of 2 and 3 infection types (Table S1). Due to the chosen diagnostic system the cryptic AxB recombinant R is misdiagnosed as A, and 299 type combinations fulfil the criterion of being informative for A, B, and C in the alleged triple-infected species. 235 (78.6%) of them would create suspicious cloning results, as alleles would be present that can not be explained by the outcome of the diagnostic procedure.
Presence of different infection types in individual insects
AIA requires sufficiently diverse Wolbachia within a multiply infected species so that an informative type combination may be detected. This involves the diagnosis of Wolbachia from individuals. Of the four high titre strains infecting R. cerasi, wCer1 is fixed in all populations [20], [21]. Assuming that the other three strains have not reached fixation in all geographic regions and/or individuals there are eight possible infection types in combination with wCer1. Indeed, all possible types were found in the 83 pupae sampled from all over Europe (Figure 3). The 24 adult flies collected from Neufeld (AT), a location where all wCer strains are present, resembled five different infection types (Figure 3), indicative for incomplete transmission of wCer2, wCer4 and wCer5. The local distribution of infection types was biased according to the geographic distribution of the wCer strains (Table 1). Higher degree infections were generally overrepresented.
Frequency of different infection types in 83 pupae and 24 adult flies. Pupae were collected from eight European regions, while all adult flies were collected at a single location in eastern Austria. Strain wCer1 is in fixation at all collection sites. All other strains are found only some individuals, indicative for incomplete transmission. Patterns like these allow the identification of complete MLST profiles without need of further physical strain segregation.
Allele intersection analysis AIA
We created an informative set of infection types, allowing unambiguous assignment of all alleles to distinct strains, by combining two singly, one doubly and one triply infected insect (Table 2). The available singly infected specimens that resulted from previous transinfection experiments into Wolbachia free C. capitata [22], [35], simplified the process of allele intersection by reducing the cloning effort and allowed the direct identification of wCer2 and wCer4 MLST alleles. A first intersection (Figure 2) was made between the known sequences of wCer4 and the set of sequences derived from cloning the wCer1 & wCer4 doubly infected fly from Znojmo, resolving the alleles of strain wCer1. In a second intersection, the already defined sequences of wCer1 and wCer2 were compared to the clones retrieved from the wCer1 & wCer2 & wCer5 triply infected host from Horitschon, and the unique sequences from this host were assigned to wCer5. After two intersections, MLST of the four R. cerasi strains was fully resolved. All wCer strains showed unique alleles for all MLST loci except for the coxA allele shared by wCer1 and wCer4. All identified alleles were cross-checked with and new alleles submitted to the MLST database. A summary of the allele IDs is shown in table 4.
Strain bias
Quantitative PCR of the wsp locus from one quadruply infected R. cerasi female revealed a strain load ratio of wCer1∶wCer2∶wCer4∶wCer5 = 0.49∶1∶0.45∶0.09. We sequenced 148 plasmids cloned from wsp and MLST PCR products from the same specimen showing correct insert sizes. Nine plasmids (6.1%), all derived from the loci wsp and fbpA, showed unique recombinant sequences not reproducible in repeated reactions. They were therefore considered as PCR artefacts and excluded from further analysis. Observed and expected numbers of plasmids carrying the different wCer sequences are given in table S2.
Figure 4 shows the relative deviations between expected and observed plasmid frequencies for the standard primers. wCer1 is in average 1.82-fold overrepresented, while only 0.76 times the expected number of wCer4 plasmids was found; plasmids carrying wsp, hcpA and fbpA were missing for wCer4. Based on its contribution to the total Wolbachia load, 6.1 of 135 plasmids should originate from wCer5, but not a single such plasmid was observed.
Relative deviations between expected and observed plasmid frequencies. Standard MLST primers were used to clone plasmids from a quadruply infected host. Expected plasmid frequencies were calculated based on the relative load of each Wolbachia strain, assuming no primer bias, and compared with the observed plasmid frequencies. At a value of 1, expected and observed frequency are identical. Values higher than 1 indicate that a strain was cloned more often than expected. A value of 0 indicates that the corresponding strain was not found in any plasmid. (*) coxA not applicable in wCer1, as the allele is shared with wCer4.
The specifity of B-group primers was confirmed for coxA, gatB, ftsZ and hcpA, but disproved for locus fbpA, where 50% of the plasmids carried inserts from the A-group strains wCer1, wCer2 and wCer4.
Discussion
Hosts can be infected by a multitude of Wolbachia strains rendering the assignment of MLST alleles a challenge. So far, acquisition of MLST sequence types from a multiply infected host was possible only if individual specimens were singly infected, or harboured one A- and B-group strain each [13], [27]. A combination of host individuals that are multiply and differently infected, i.e. carry different infection types, can provide inference on strain specific MLST profiles. Through a series of operations, AIA tests whether the combination fulfils criteria of informativeness. To evaluate the practical applicability of the theory behind AIA, it was first determined whether informative combinations of infection types are exceptional or frequent in field populations. Our simulations indicate that the majority of all possible type combinations is informative, and several studies suggest that the differences of Wolbachia distribution in field sampled insects are sufficient to apply AIA in most cases of multiply infected species [16], [20], [29], [36], [37].
Application of AIA in the field model species R. cerasi
The multiply infected field model species R. cerasi is refractory to MLST characterisation by conventional means: it harbours three Wolbachia strains of supergroup A, with one of these strains in fixation in all populations sampled so far, one supergroup B strain and traces of one recombinant strain. By applying AIA, a complete characterization of four Wolbachia strains infecting R. cerasi was achieved using cloned PCR products originating from four individual flies of which two were multiply infected with two A-group strains, and two one A- plus one B-group strain, respectively. Availability of single-infected individuals from an artificial Wolbachia microinjection reduced cloning effort, but even if these single infections were not available, the set of identified infection types in the 83 pupae used in this study would have allowed the assembly of 81 different informative type combinations (Table S3): 20 out of 56 possible type combinations of three individuals with unique infection types are informative; combining four individuals, 61 of the 70 possible combinations are informative. Figure S2 shows an example of an alternative informative set using three R. cerasi individuals, one doubly (two A-group strains) and two triply-infected (two A- and one B-group strains each).
Required sequencing effort
Assessment of Wolbachia diversity in a population requires cloning and sequencing of PCR products, and the choice of an insufficient number of plasmids may leave some diversity undetected. In a preceding study [20], rarefaction analysis [38] was shown as an efficient tool to determine whether a sufficient number of sequences was analysed for comprehensive assessment of strain diversity.
Sequencing effort to identify the Wolbachia strains of the individuals forming the type combination is more relaxed, as the absolute number of strains present in each probed sample was already determined by strain specific PCR. Thus, the number of alleles at a given MLST locus should be equal to or lower than the number of Wolbachia strains. A smaller number of alleles than strains allows two interpretations: (a) two strains share the same allele for a given locus [27] or (b) a strain is exhibiting a null allele due to insufficient PCR amplification [39]. To safeguard against case (b), repetition of cloning using alternative MLST primers (e.g. ∼64fold degenerate primers; http://pubmlst.org/wolbachia/info/amp_seq_single.shtml) can be performed. Alternatively, (a) can be proven by successfully isolating the same allele from two individuals that do not share the questioned strain; this approach was used here to prove the identity of coxA in wCer1 and wCer4: the same allele was isolated from WolMedS10.3 (wCer4) and Horitschon (wCer1&2&5).
In some cases, cloning of a MLST locus might reveal more alleles than strains predicted by diagnostic PCR. If not caused by PCR artefacts (see [40] for a general discussion on PCR error, and [41] for in vitro recombination during PCR), such a finding indicates either insufficient sampling when assessing the host species' Wolbachia community, or a shared allele in the diagnostic marker. If PCR artefacts can be excluded, the MLST locus exhibiting the additional allele has to be established as additional diagnostic marker, and the number of strains present in the species has to be corrected upwards.
Potential impact of recombination
Recombination is frequent in Wolbachia, and large genomic regions may be exchanged between strains [15], [28]. Recombination events may impact AIA at two points: (a) within the diagnostic marker locus and (b) between MLST loci. In case of (a), the diagnostic PCR will overestimate strains than alleles can be identified from the MLST clones; this scenario resembles a generalized case of shared MLST alleles, which can be handled as described before.
In scenario (b), at least one complete MLST locus has moved from one Wolbachia strain to another, leaving the diagnostic marker unchanged. Figure 5a illustrates such a recombination between two strains A and B at locus ftsZ, creating the new strain R. Diagnostic PCR will mistype this strain as A and suggest a double-infected species, while effectively three strains are present. A triple infected species allows seven possible infection types (Figure 5b). The cloning efforts for AIA would generate suspicious patterns in the three infection types where the recombinant strain has segregated from at least one of its parents, revealing the hidden recombination: the single R infection directly shows the recombination; the combination A+R, diagnosed as single infection with strain A, will present two alleles for ftsZ; finally, the combination R+B, diagnosed as A+B, will not show any allele of strain A in the ftsZ clones.
(a) In a hypothetical recombination event, the ftsZ locus of strain B has invaded into strain A, forming the new strain R. The diagnostic marker used for infection type (IT) identification will mistype R as A. (b) Cloning results from different ITs. In three cases (shaded), suspicious sequences will be observed.
We have simulated a more complex situation with three identified strains and one cryptic recombinant, and have shown that 78.6% of the possible type combinations would create suspicious cloning results, uncovering the cryptic strain. Resolving recombinant Wolbachia strains will remain a complex issue and is only possible if the recombinant has segregated from at least one parent, either by natural processes like incomplete transmission, or by artificial transinfection. If segregation has occurred, application of AIA will detect the strain with a high likelihood, which can be improved by adding redundancy to the approach, i. e. by cloning alleles of more individuals than needed for a minimal informative type combination. As recombination events between supergroups exist [26], it is important to combine the sequences retrieved with standard and group-specific primers to one alignment before applying AIA.
Strain bias
Isolation of a specific allele by cloning of PCR products does not only depend on its density in the template, but also in the intensity of amplification compared to that of competing alleles present in the reaction. End-point PCR from mixed templates is often assumed to be a semiquantitative amplification method, where the ratio of generated amplicon after a fixed number of cycles resembles the template ratio in the original mixture [41]. This assumption is challenged by numerous factors affecting PCR such as lack of primer specificity and formation of secondary template structures. The possible bias may span from 1∶1 amplicon formation irrespective of the initial template ratio [42] to complete suppression of a minor template in presence of a more frequent one [43]. Biased amplification of individual loci was reported for MLST of some strains of Pseudomonas aeruginosa [44] and Clostridium difficile [39].
The comparison of strain load determined by qPCR and plasmid frequencies of cloned MLST amplicons indicates that standard MLST primers underlie strong strain bias (Figure S2, Table S2). Most striking is the fact that the standard primers for hcpA and fbpA (and the 81F/691R primers for wsp) failed to produce a single clone from strain wCer4, which contributes to 22.2% of the original Wolbachia load, and that all standard primers did not amplify strain wCer5. While it is evident that standard primers do amplify wCer4 when present as a single infection [20], this proof is missing for wCer5, as no individuals harbouring only this strain are currently available. Therefore it remains unclear whether the B-group origin of wCer5 or its comparatively low contribution of 4.4% to the Wolbachia load are responsible for the absent amplification. It is also notable that MLST primers do not simply exhibit suppression of minor templates: wCer1, with 24.1% load comparable to wCer4, had elevated plasmid frequencies for all investigated loci. For an exhaustive detection of genotypes in multiply infected hosts both standard and group specific primers should be applied, ideally on individuals with different infection types.
The cloning approach revealed two more observations relevant for Wolbachia MLST. First, B-group specific primers for loci coxA and fbpA co-amplified a substantial proportion of A-group strains. It must therefore be doubted that group specific primers alone are sufficient for in vitro sequence segregation, especially when the A-B-group ratio is heavily biased towards one group. Direct sequencing of PCR products amplified with B-group specific primers from multiply infected R. cerasi samples repeatedly resulted in noisy electropherograms and erroneous base calls (data not shown), suggesting that cloning should be preferred to direct sequencing of PCR products, even if a supergroup contributes only one strain to a multiply infected host. Second, in vitro recombination [45] was observed in 16.7% of the plasmids cloned from fbpA standard and 21.4% from fbpA B-group specific primers (Table S1). Typical for in vitro rearrangements, the chimeras were not reproducible in independent replicas of PCR and cloning, demonstrating the necessity of at least two independent PCR reactions to confirm a novel genotype.
MLST is currently revolutionizing the way of typing Wolbachia infections, detecting evolutionary events and retrieving phylogenetic information of this endosymbiont [28]. So far, MLST was built on the assumption of singly infected systems or systems where one A- and B-group strain simultaneously infected a host without recombination – an assumption that is not realistic in the light of the high abundance of multiply infected Wolbachia host species [16], [19], [36], [37]. The AIA approach presented here is a novel and straightforward tool to apply MLST in multiply infected Wolbachia host species that were so far refractory to MLST typing. The method will render artificial strain segregation unnecessary in most cases, and highly reduce segregation effort in those where informative type combinations can not be found readily in natural field populations. Furthermore, AIA is a powerful tool to detect recombination events. We expect that AIA will improve allele assignment of Wolbachia MLST loci, and facilitate the research on the evolution, dynamics and population genetics of multiple infections in field hosts, rather than microbially streamlined lab hosts of Wolbachia. The underlying principle of AIA may easily be adopted for MLST approaches in other uncultivable bacterial genera that occur as multiple strain infections. It may also be useful for metagenomic sequencing projects [46], [47] that currently face difficulties with assembly of reads in multi-genome scenarios [48]. The assignment and assembly of metagenomic data from a parallel-sequencing approach of samples containing different type combinations could be supported by principles of AIA. In the case of multiply Wolbachia infected hosts this would involve the sequencing of a series of pools with distinct infection types, and then assigning contigs to the different Wolbachia genomes by using AIA like strategies in a parallel tagged pyrosequencing approach [49].
Supporting Information
Figure S1.
Examples of informative type combinations. Two examples of simulated, informative type combinations and the stepwise allele assignment of AIA. Each circle and capital letter reresents one individual, each strain is represented by a colored ellipse; alleles identified in earlier steps are dashed. S1.1: Five strains in three triple infected individuals. Step 1: the intersection A ∩ B resolves the red allele. Step 2: the intersection A ∩ C resolves the green allele; in the same step, the complements resolve the brown and pink allele. Step 3: The blue allele is resolved by removing the already identified red and pink alleles from the alignment of B. S1.2: Seven strains in four individuals; alleles identified in earlier steps are dashed. Step 1: alleles from A that are not found in D must belong to purple. Step 2: alleles in the intersect A ∩ B which are not purple belong to yellow. Step 3: alleles in the intersect A ∩ C which are not purple belong to yellow. Step 4: all yet unidentified alleles in A are blue. Step 5: alleles in the intersect B ∩ C which are not purple belong to brown. After identification of the brown allele, all unidentified alleles in B are pink, and unidentified alleles C are red.
https://doi.org/10.1371/journal.pone.0022198.s001
(TIF)
Figure S2.
An alternative type combination for AIA in R. cerasi. One out of 81 informative type combinations in R. cerasi that does not rely on artificial strain segregation: one doubly (A) and two triply (B, C) infected individuals allow the assignment of all alleles after two intersections. Alleles identified in a current step are underlined. Alleles identified in earlier steps are grey.
https://doi.org/10.1371/journal.pone.0022198.s002
(TIF)
Table S1.
In a species diagnosed as triple infected with strains A, B, C, a cryptic recombinant R has formed. The table shows all possible combinations of 2 and 3 infection types. Types leading to suspicious cloning results are shaded. Each combination is tested for informativeness to resolve A, B and C under the assumption that R is consequently mis-diagnosed as A.
https://doi.org/10.1371/journal.pone.0022198.s003
(DOC)
Table S2.
Observed numbers of plasmids cloned from DNA of a quadruply infected host Neufeld, and expected numbers based on each strain's relative load in the original DNA extract.
https://doi.org/10.1371/journal.pone.0022198.s004
(DOC)
Table S3.
All possible 3- and 4-fold combinations of infection types found in R. cerasi field samples. These is a total of 126 combinations, of which 81 are informative. Uninformative combinations are shaded.
https://doi.org/10.1371/journal.pone.0022198.s005
(DOC)
Computer Program S1.
TCinfo is a small computer program that implements the test algorithm for informativeness described in figure 1. File TCinfo.exe is a Windows® executable.
https://doi.org/10.1371/journal.pone.0022198.s006
(EXE)
Computer Program S2.
File TCinfo.pas is an ASCII text file containing the source code of TCinfo. The program was written in Free Pascal (http://www.freepascal.org) under the GNU General Public License as published by the Free Software Foundation.
https://doi.org/10.1371/journal.pone.0022198.s007
(PAS)
Glossary S1.
Short descriptions of set therory terms used in this paper.
https://doi.org/10.1371/journal.pone.0022198.s008
(DOC)
Author Contributions
Conceived and designed the experiments: WA MR WJM CS. Performed the experiments: WA HS DS. Analyzed the data: WA MR KM WJM CS. Contributed reagents/materials/analysis tools: WA MR KM WJM CS. Wrote the paper: WA MR CS.
References
- 1. Hilgenböcker K, Hammerstein P, Schlattmann P, Telschow A, Werren JH (2008) How many species are infected with Wolbachia? - a statistical analysis of current data. FEMS Microbiol Lett 281: 215–220.
- 2. Jeyaprakash A, Hoy MA (2000) Long PCR improves Wolbachia DNA amplification: wsp sequences found in 76% of sixty-three arthropod species. Insect Mol Biol 9: 393–405.
- 3. Werren JH, Windsor DM (2000) Wolbachia infection frequencies in insects: evidence of a global equilibrium? Proc R Soc Lond B 267: 1277–1285.
- 4. Werren JH, Windsor DM, Guo LR (1995) Distribution of Wolbachia among neotropical arthropods. Proc R Soc Lond B 262: 197–204.
- 5. Bandi C, Anderson TJC, Genchi C, Blaxter ML (1998) Phylogeny of Wolbachia in flarial nematodes. Proc R Soc Lond B 265: 2407–2413.
- 6. O'Neill SL, Giordano R, Colbert AME, Karr TL, Robertson HM (1992) 16S rRNA phylogenetic analysis of the bacterial endosymbionts associated with cytoplamsmic incompatibility in insects. Proc Natl Acad Sci USA 89: 2699–2702.
- 7.
Hoffmann AA, Turelli M (1997) Cytoplasmic incompatibility in insects. In: O'Neill SL, Werren JH, Hoffmann AA, editors. Influential passengers. New York: Oxford University Press. pp. 42–80.
- 8. McGraw E, O'Neill SL (2004) Wolbachia pipientis: intracellular infection and pathogenesis in Drosophila. Curr Opin Microbiol 7: 67–70.
- 9. Stouthamer R, Breeuwer JAJ, Hurst GD (1999) Wolbachia pipientis: microbial manipulator of arthropod reproduction. Annu Rev Microbiol 53: 71–102.
- 10. Werren JH (1997) Biology of Wolbachia. Annu Rev Entomol 42: 587–609.
- 11. Werren JH, Baldo L, Clark ME (2008) Wolbachia: master manipulators of invertebrate biology. Nat Rev Microbiol 6: 741–751.
- 12. Baldo L, Lo N, Werren JH (2005) Mosaic nature of wsp (Wolbachia surface protein). J Bacteriol 187: 5406–5418.
- 13. Raychoudhury R, Baldo L, Oliveira DCSG, Werren JH (2009) Modes of acquisition of Wolbachia: horizontal transfer, hybrid introgression, and codivergence in the Nasonia species complex. Evolution 63: 165–183.
- 14. Borm S, Wenseleers T, Billen J, Boomsma JJ (2003) Cloning and sequencing of wsp encoding gene fragments reveals a diversity of co-infecting Wolbachia strains in Acromyrmex leafcutter ants. Mol Phylogenet Evol 26: 102–109.
- 15. Baldo L, Bordenstein S, Wernegreen JJ, Werren JH (2006) Widespread recombination throughout Wolbachia genomes. Mol Biol Evol 23: 437–449.
- 16. Reuter M, Keller L (2003) High levels of multiple Wolbachia infection and recombination in the ant Formica exsecta. Mol Biol Evol 20: 748–753.
- 17. Riegler M, Sidhu M, Miller WJ, O'Neill SL (2005) Evidence for a global Wolbachia replacement in Drosophila melanogaster. Curr Biol 15: 1428–1433.
- 18. Werren JH, Bartos JD (2001) Recombination in Wolbachia. Curr Biol 11: 431–435.
- 19. Dedeine F, Ahrens M, Calcaterra L, Shoemaker DD (2005) Social parasitism in fire ants (Solenopsis spp.): a potential mechanism for interspecies transfer of Wolbachia. Mol Ecol 14: 1543–1548.
- 20. Arthofer W, Riegler M, Schneider D, Krammer M, Miller WJ, et al. (2009) Hidden Wolbachia diversity in field populations of the European cherry fruit fly, Rhagoletis cerasi (Diptera, Tephritidae). Mol Ecol 18: 3816–3830.
- 21. Riegler M, Stauffer C (2002) Wolbachia infections and superinfections in cytoplasmically incompatible populations of the European cherry fruit fly Rhagoletis cerasi (Diptera, Tephritidae). Mol Ecol 11: 2425–2434.
- 22. Zabalou S, Riegler M, Theodorakopoulou M, Stauffer C, Savakis C, et al. (2004) Wolbachia-induced cytoplasmatic incompatibility as a means for insect pest population control. Proc Natl Acad Sci USA 101: 15042–15045.
- 23. Braig HR, Zhou W, Dobson SL, O'Neill SL (1998) Cloning and characterization of a gene encoding the major surface protein of the bacterial endosymbiont Wolbachia pipientis. J Bacteriol 180: 2373–2378.
- 24. Lo N, Casiraghi M, Salati E, Bazzocchi C, Bandi C (2002) How many Wolbachia supergroups exist? Mol Biol Evol 19: 341–346.
- 25. Zhou W, Rousset F, O'Neill SL (1998) Phylogeny and PCR-based classification of Wolbachia strains using wsp gene sequences. Proc R Soc Lond B 265: 509–515.
- 26. Malloch G, Fenton B (2005) Super-infections of Wolbachia in byturid beetels and evidence for genetic transfer between A and B super-groups of Wolbachia. Mol Ecol 14: 627–637.
- 27. Baldo L, Dunning Hotopp JC, Jolley KA, Bordenstein SR, Biber AA, et al. (2006) Multilocus Sequence Typing System for the Endosymbiont Wolbachia. Appl Environ Microb 72: 7098–7110.
- 28. Baldo L, Werren JH (2007) Revisiting Wolbachia supergroup typing based on wsp: spurious lineages and discordance with MLST. Curr Microbiol 55: 81–87.
- 29. Merçot H, Poinsot D (1998) Wolbachia transmission in a naturally bi-infected Drosophila simulans strain from New-Caledonia. Entomol Exp Appl 86: 97–103.
- 30. Dedeine F, Vavre F, Fleury F, Loppin B, Hochberg ME, et al. (2001) Removing symbiotic Wolbachia bacteria specifically inhibits oogenesis in a parasitic wasp. Proc Natl Acad Sci USA 98: 6247–6252.
- 31. Koukou K, Pavlikaki H, Kilias G, Werren JH, Bourtzis C, et al. (2006) Influence of antibiotic treatment and Wolbachia curing on sexual isolation among Drosophila melanogaster cage populations. Evolution 60: 87–96.
- 32. O'Neill SL, Pettigrew M, Sinkins SP, Braig HR, Andreadis TG, et al. (1997) In vitro cultivation of Wolbachia in an Aedes albopictus cell line. Insect Mol Biol 6: 33–39.
- 33.
Sambrook J, Fritsch EF, Maniatis T (1989) Molecular Cloning, a Laboratory Manual, 2nd edn. New York: Cold Spring Harbour Laboratory Press.
- 34. Thompson JD, Gibson TJ, Plewniak F, Jeanmougin F, Higgins DG (1997) The ClustalX Windows interface: flexible strategies for multiple sequence alignment aided by quality analysis tools. Nucleic Acids Res 24: 4876–4882.
- 35. Riegler M, Charlat S, Stauffer C, Merçot H (2004) Wolbachia transfer from a true fly into the real fruit fly: Investigating the outcomes of host/symbiont co-evolution. Appl Environ Microb 70: 273–279.
- 36. Behura SK, Sahu SC, Mohan M, Nair S (2001) Wolbachia in the Asian rice gall midge, Orseolia oryzae (Wood-Mason): correlation between host mitotypes and infection status. Insect Mol Biol 10: 163–171.
- 37. Jamnongluk W, Kittayapong P, Baimai V, O'Neill SL (2002) Wolbachia infections of tephritid fruit flies: molecular evidence for five distinct strains in a single host species. Curr Microbiol 45: 255–260.
- 38. Schloss PD, Handelsman J (2005) Introducing DOTUR, a computer program for defining operational taxonomic units and stimating species richness. Appl Environ Microb 71: 1501–1506.
- 39. Lemee L, Dhalluin A, Pestel-Caron M, Lemeland JF, Pons PL (2004) Multilocus sequence typing analysis of human and animal Clostridium difficile isolates of various toxigenic types. J Clin Microbiol 42: 2609–2617.
- 40. Kobayashi N, Tamura K, Aotsuka T (1999) PCR error and molecular population genetics. Biochem Genet 37: 317–321.
- 41. Becker S, Böger P, Oehlmann R, Ernst A (2000) PCR bias in ecological analysis: a case study for quantitative Taq nuclease assays in analyses of microbial communities. Appl Environ Microb 66: 4945–4953.
- 42. Suzuki MT, Giovannoni SJ (1996) Bias caused by template annealing in the amplification mixtures of 16S rRNA genes by PCR. Appl Environ Microb 62: 625–630.
- 43. Schnell S, Mendoza C (1997) Theoretical description of the polymerase chain reaction. Theor Biol 188: 313–318.
- 44. Vernez I, Hauser P, Bernasconi MV, Blanc DS (2005) Population genetic analysis of Pseudomonas aeruginosa using multilocus sequence typing. FEMS Immunol Med Mic 43: 29–35.
- 45. Meyerhans A, Vartanian JP, Wain-Hobson S (1990) DNA recombination during PCR. Nucleic Acids Res 18: 1687–1691.
- 46. Salzberg SL, Dunning Hotopp JC, Delcher AL, Pop M, Smith DR, et al. (2005) Serendipitous discovery of Wolbachia genomes in multiple Drosophila species. Genome Biol 6: R23.
- 47. Rodríguez-Valera F (2004) Environmental genomics, the big picture? FEMS Microbiol Lett 231: 153–158.
- 48. Pignatelli M, Moya A (2011) Evaluating the fidelity of de dovo short read metagenomic assembly using simulated data. PLoS ONE 6: e19984.
- 49. Meyer M, Stenzel U, Hofreiter M (2008) Parallel tagged sequencing on the 454 platform. Nat Protoc 3: 267–278.