Figures
Abstract
Today, annotated amino acid sequences of more and more transcription factors (TFs) are readily available. Quantitative information about their DNA-binding specificities, however, are hard to obtain. Position frequency matrices (PFMs), the most widely used models to represent binding specificities, are experimentally characterized only for a small fraction of all TFs. Even for some of the most intensively studied eukaryotic organisms (i.e., human, rat and mouse), roughly one-sixth of all proteins with annotated DNA-binding domain have been characterized experimentally. Here, we present a new method based on support vector regression for predicting quantitative DNA-binding specificities of TFs in different eukaryotic species. This approach estimates a quantitative measure for the PFM similarity of two proteins, based on various features derived from their protein sequences. The method is trained and tested on a dataset containing 1 239 TFs with known DNA-binding specificity, and used to predict specific DNA target motifs for 645 TFs with high accuracy.
Citation: Schröder A, Eichner J, Supper J, Eichner J, Wanke D, Henneges C, et al. (2010) Predicting DNA-Binding Specificities of Eukaryotic Transcription Factors. PLoS ONE 5(11): e13876. https://doi.org/10.1371/journal.pone.0013876
Editor: Tim J. Hubbard, Wellcome Trust Sanger Institute, United Kingdom
Received: June 11, 2010; Accepted: October 14, 2010; Published: November 30, 2010
Copyright: © 2010 Schröder et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This work was funded by the National Genome Research Network (NGFN II) of the Federal Ministry of Education and Research in Germany under contract numbers 0313323 and 0313080 L. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
As of March 2010, the genomes of 178 eukaryotes were completely sequenced and for another 404 eukaryotic species sequencing projects were in progress [1]. In a large effort, these datasets are annotated by biologists or computational methods [2], [3], and meanwhile they have become one of the most comprehensive resources in biological sciences. By means of the annotation of their domains proteins can be assigned to certain molecular functions (e.g., transcription factor), however, quantitative functional information (e.g., DNA-binding specificities) remain scarce. Despite recent progress in the development of high-throughput technologies for the measurement of protein-DNA interaction parameters as proposed by Maerkl and Quake et al. [4] and microarray based technologies for the analysis of TF binding specificities [5], [6], the determination of highly resolved quantitative binding specificity information remains laborious.
Accordingly, comprehensive binding specificity data is only available for a fraction of all known proteins. Only for approximately 3% of all TFs in Arabidopsis thaliana, for instance, DNA-binding specificities have been experimentally determined so far. Even for the most intensively studied organisms, i.e., human, mouse and rat, roughly one-sixth of all proteins with annotated DNA-binding domain have been characterized experimentally (see Figure S1). This leads to an enormous gap between the amount of annotated protein sequences and the amount of quantitative binding data.
In the field of qualitative protein function prediction, annotations that were assigned to one protein are often transferred to other proteins with high sequence similarity [7], [8], based on the assumption that similar protein sequences imply similar protein function [9]–[11]. Previously, some approaches were presented that automatically perform such transfers of functional annotations based on sequence similarities [12], [13]. Several similar approaches proceed by extracting the -nearest neighbors for a query protein and then transfer all or the most frequent functional annotations – such as GO terms [14]–[17]. Engelhardt et al. used the evolutionary history of proteins as represented by a phylogenetic tree to perform protein function transfers [18]. Brunak et al. applied modern machine learning techniques such as artificial neural networks or support vector machines to predict protein annotations based on various features derived from annotated amino acid sequences [19], [20].
Applied to TFs these functional annotations may indicate what structural superclass a certain TF belongs to, for instance ‘zinc finger’ [21]. Such annotations, however, do not provide quantitative information, like the DNA-binding specificity of a certain TF, because binding-specificities within TF superclasses, and even within TF classes, may vary tremendously. During the past years, significant progress has been made in our understanding of the biophysical mechanisms underlying the specific DNA-recognition by TFs [22]–[24]. Recently, accurate mechanistic models have been developed to predict physical interactions between TFs and DNA molecules [25], [26]. However, for genome-wide applications, i.e., the computational inference of transcriptional regulatory networks, more simple representations of DNA-binding specificities, such as position frequency matrices (PFMs) are used more commonly [27]–[29]. PFMs indicate for a certain TF how frequent the nucleotides A, C, G, and T occur at each position within the binding site [30]. Thus, to transfer or even predict this type of quantitative information a new approach is needed, which allows to perform transfers of quantitative information with low error rate. To this end, Alleyne et al. applied various machine learning methods in order to predict binding profiles of mouse homeodomain TFs [31]. More recently, Alamanova et al. proposed a new approach to calculate position weight matrices from protein-DNA complex structures [32]. Toward the challenge of developing a general approach for the prediction of DNA-binding specificities from protein sequences, several questions should be addressed. (1) Which sequence based score is a good quantitative indicator for binding similarity? (2) How large is the error when transferring and recombining quantitative information between proteins? (3) Can this process be automated on large sets of transcription factors? In this work, we developed a method that transfers and combines PFMs between proteins, while addressing each of the open questions. First, instead of using a single pairwise alignment score, we align two proteins with respect to different evolutionary, structural and physicochemical properties. Given these alignments we apply support vector regression (SVR) to infer a quantitative measure for the PFM similarity of two proteins that is based on their protein sequences. This approach is mathematically referred to as distance metric learning, a relatively young discipline in the field of supervised machine learning [33], and has previously not been applied to predict PFM similarities. Based on the SVR model, a framework is implemented that allows to transfer and predict quantitative binding specificity data between TFs. Second, to estimate the average error 5-fold cross-validations with 10 runs is accomplished during the training and the final results are evaluated on a separate dataset that is used for testing purposes only. Third, to show that this method is applicable in large scale we use it to transfer DNA-binding specificity data between TFs to enrich the as yet incomplete annotation of DNA binding consensus motifs of TFs.
Results
Functional and sequence datasets
To train our approach a sufficient number of TFs has to be collected for which quantitative binding specificity information, the protein sequence and the DNA-binding domain annotation is available. We collected binding specificity data (PFMs) from several databases, such as TRANSFAC® (see Table 1), and protein sequences with annotated DNA-binding domains from sequence databases, such as UniProt (see Section ‘Protein sequences, DNA-binding domain annotations and TF-classifications’) focusing on eukaryotic species. These data was retrieved and merged into a non-redundant dataset that contains 1 239 eukaryotic TFs with known PFM (see Section ‘DNA-binding specificity databases’). We partitioned this dataset according to the five structural superclasses of TFs [34], following the assumption that TFs from different superclasses bind distinct DNA-motifs and should therefore be treated independently. The five structural superclasses are: (1) basic domain (basic domain), (2) zinc-coordinating DNA-binding domains (zinc finger), (3) helix-turn-helix (helix-turn-helix), (4) beta-scaffold factors with minor groove contacts (beta-scaffold) and (5) other transcription factors (others). In addition, each superclass specific dataset was subdivided into a training and a test set with a ratio of 2∶1 (see Figure 1(a)). Then, a second dataset was compiled that contains proteins for which no PFM but the protein sequence and the DNA-binding domain annotation could be retrieved. This dataset contains 5 723 TFs that were also partitioned according to their structural superclass. In a later stage of this work, PFMs from proteins in the first dataset were combined and transferred to proteins in the second dataset, while estimating the average error. The classification of TFs with annotated DNA-binding domain and/or PFM to the five structural superclasses is shown in Figure 1(a) and compared to the estimated number of existing TFs [35]. It becomes obvious from Figure 1(a) that the number of TFs without PFM is by far larger than the number of TFs with experimentally determined PFM. Figure 1(c) shows the distribution of all TFs with known PFM over the structural superclasses. The largest number of PFMs was obtained for the helix-turn-helix class and the lowest number of PFMs was obtained for the class others even though others is the second largest superclass (see Figure 1(b)). In the Figure S1 the number of experimentally derived versus predicted PFMs among six of the most intensively studied model organisms including Homo sapiens, Mus musculus, Rattus norvegicus, Arabidopsis thaliana, Drosophila melanogaster and Saccharomyces cervisiae is depicted.
(a) All TFs with known PFM are partitioned with respect to their structural superclass [34]. The number of PFMs are given by the non-redundant dataset compiled in this work (Section ‘DNA-binding specificity databases’), which is split into a training and a test dataset. (b) Distribution of TFs with annotated DNA-binding domain over structural superclasses, (c) Distribution of TFs with experimentally derived PFM over structural superclasses.
Predicting PFM similarity from annotated protein sequences
The presented approach can be partitioned into two stages. The first stage comprises the training of SVR models, i.e., one model for each of the five structural superclasses, that quantitatively predict the functional similarity (i.e., PFM similarity) of TFs based on sequence homology and other features derived from their annotated protein sequences (see Figure 2). In the second stage these SVR models are used to transfer PFMs to TFs of interest (see Figure 3).
An SVR-based supervised machine learning approach is used to predict pairwise PFM similarities based on various features, derived from amino acid sequences of the DNA-binding domains of pairs of TFs. To this end, for each TF pair in the training set, a feature vector consisting of phylogenetic, physicochemical and structural domain similarity scores is computed. All pairwise PFM similarities in the training set are quantified using MoSta [36]. Next, a support vector machine is trained to predict PFM similarities based on the sequence-derived feature vectors. In machine learning, this methodology is referred to as supervised distance metric learning [33].
The prediction framework takes the following information about the query TF as input: (1) the corresponding organism, (2) the entire protein sequence, (3) the interval spanned by the DNA-binding domain, (4) the structural superclass of the TF. The query TF is compared to all TFs with known PFM and identical superclass. Pairwise feature vectors are computed and the similarity between the known PFMs and the unknown one of the query TF are predicted based on SVR. Next, the best matches, i.e., the TFs for which a PFM similarity above a predefined threshold (default: 0.95) was predicted, are merged to a consensus PFM using STAMP [37]. To assure that the merged PFMs are sufficienly similar, an outlier filter is applied before merging in order to remove dissimilar PFMs causing inhomogeneity of the best matches. In the shown example, four best matches were found for MEF2A, a mouse beta scaffold myocyte enhancer factor with known PFM taken from the test set. The best matches are mostly MEF isoforms from human with known PFMs. Since these PFMs are very similar to each other, no outliers have to be removed before merging. The predicted consensus PFM was compared to an experimentally detemined PFM in order to assess the error in terms of normalized MoSta units [36]. The error between the predicted and the annotated PFM is 0.04, which precisely agrees with the average PFM similarity of the best matches (0.96) predicted by the SVR model.
First stage: Training of SVR model to predict PFM similarities.
In the first stage a training set of TFs with known PFMs and annotated protein sequences is used to learn PFM-similarities based on support vector regression. To this end, for each pair of TFs in the training set a vector of 30 different pairwise similarity scores in compiled with respect to various evolutionary, structural and physicochemical properties. Most of those pairwise similarity features are derived from the amino acid sequences of the annotated DNA-binding domains. A comprehensive list of all pairwise similarity scores can be found in Table 2. The results of these pairwise comparisons are used to train an SVR model that predicts PFM-similarities which are quantified using the well established multiple alignment based PFM similarity score MoSta [36]. In machine learning, this process, i.e., the learning of similarities/distances from various features, is referred to as distance metric learning [33]. Figure 2 depicts the training of this supervised machine learning approach. For each pair of TFs in the trainings set, feature vectors consisting of all 30 similarity features are compiled. Based on these vectors, which represent the binding domain similarities, the SVM is trained to learn the PFM similarities.
Second stage: PFM prediction and error estimation.
In this stage PFMs are combined and transfered to query proteins that either lack PFMs or that are used for testing purposes (see Figure 1). The prediction framework requires for any given query TF three pieces of information. First, the respective organism of the query TF, which is required to derive the phylogenetic feature. Second, the sequence of the annotated DNA-binding domain, from which most of the remaining features are derived. Third, the structural superclass of the DNA-binding domain, because one model for each structural superclass was trained individually. Given this information, pairwise similarities between the query TF and all other TFs with known PFM are predicted using the corresponding SVR model of the respective structural superclass. The best matching PFMs, if any, are further processed an merged to a consensus PFM in the remaining steps. First, outliers are detected and removed. Second, the consensus PFM is generated using the STAMP PFM merging algorithm which is described elsewhere [37]. The resulting consensus PFM is finally returned as output for the respective query TF. It is important to note, that not for any given query TF an output is generated. If no similarities to known PFMs are predicted by the SVR models, no PFM prediction can be performed.
In order to estimate the prediction error, an external test set is compiled consisting of 414 TFs with known PFMs which are not used in the SVR-training procedure (see Figure 1). The failure between predicted and original PFM is quantified in terms of MoSta units [36]. A detailed example for a myocyte enhancer factor (MEF-2A), a mouse beta scaffold TF available retrieved from TRANSFAC public, is depicted in Figure 3. Three MEF isoforms from human are predicted by the respective beta scaffold SVR model to be highly similar to the PFM of the query factor and all lie above the required best match threshold of 0.95. These PFMs are very similar to each other such that no outliers need to be removed. The error between the predicted consensus PFM and the real PFM is 0.04. Thus, the estimated PFM similarity of 0.96 precisely agrees with the observed error.
The overall error rate is estimated for each structural superclass individually by calculating the average absolute error (AAE), i.e., the average [0,1]-normalized distance between predicted and annotated PFMs in terms of MoSta units [36]. The reader is referred to the Methods section, for a formal description of the AAE (see ‘Validation of the SVR models and predicted PFMs’).
Sequence based PFM similarity measure
Results of the most predictive SVR models for each structural superclass.
For each structural superclass one SVR model was derived from the training datasets that contain binding specificity data (PFMs). Thereby, the objective of every SVR was to learn a quantitative relationship between the sequence based features (see Table 2) and the PFM similarity of the TFs (see Section ‘Low-level similarity score for PFMs’). To obtain robust estimates of the predictive performance of the SVR models for each structural superclass 5-fold cross-validations with 10 runs of repeated random partitionings was performed. During this process feature selection was dismissed, as it did not have a positive impact on the prediction performance. Thus, all SVR models were trained with all features. Finally, for each structural superclass the predictive performance of the derived SVR models was evaluated on the test dataset. The results of these tests indicate a linear relationship between the predicted and the measured PFM similarity scores (see Figure 4), where the Pearson correlation coefficients are: basic domain: 0.77, zinc finger: 0.80, helix-turn-helix: 0.77, beta-scaffold: 0.64 and others: 0.69. The respective average absolute errors (AAEs) on the test datasets are: basic domain: 0.093, zinc finger: 0.087, helix-turn-helix: 0.098, beta-scaffold: 0.080 and others 0.137. The errors on the test and training set are in a similar range, which indicates that the models have a good ability to generalize. For the class others the AAE on the training set (0.095) was lower than on the test set (0.137), thus the generalization ability of this model is not optimal, which may be due to the small number of training points and the structural diversity of the contained TFs (see Figure 1).
Each dot indicates the predicted and known PFM similarity of all TF-pairs in the test dataset. The -axis gives the sequence based SVR-based PFM similarity prediction and the
-axis gives the similarity of their known PFMs. Thereby, for each structural superclass the best SVR model from the training dataset was used for the predictions. The Pearson correlation-coefficients are as follows: basic domain: 0.77, zinc finger: 0.80, helix-turn-helix: 0.77 and beta-scaffold: 0.64.
Analysis of individual pairwise similarity measures.
In the previous section the results of PFM similarity predictions based on 30 sequence based features were shown. Here, the question arises if an individual feature is sufficient to infer PFM similarity and accordingly, how much is the benefit of combining the 30 features using support vector regression? To determine if individual features are already sufficient to quantitatively predict PFM similarity, an SVR was trained and tested separately for each of the 30 features on the structural superclass with the highest Pearson correlation coefficient, namely zinc finger. The AAE for each individual feature is given in Figure 5. This analysis shows that the AAE increases about 60% when comparing the SVR trained on 30 features against the best SVR that was trained on an individual feature. These results suggest that the combination of 30 different sequence-derived features performs best to learn linear relationships between sequence- and PFM-similarities. We additionally assessed the prediction performance for diverse subsets of the 30 features, selected based on PCA [38] and RankProp [39], respectively (data not shown). Based on the observation that the PFMs predicted by the all-feature classifier performed best, we concluded that every individual feature contributes to the overall prediction performance. Note that this evalutation does not assess PFM transfer errors (these are shown in Figure 6), but regression errors of SVR models.
Depicted are the average regression errors when training the SVR with a single feature for the superclass zinc finger. These error estimations are performed with a 10×5 cross-validation on the trainings dataset. The ‘all features’ bar indicates the average regression error when training on all 30 features. This evaluation is performed to assess the prediction performance of SVR models trained on single features individually compared to the prediction performance of SVR models trained on all features. These results suggest that the 30 feature SVR performs best to learn linear relationships between DBD- and PFM-similarities.
The box plots show the distribution of the AAE, i.e., the mean distance between predicted and annotated PFMs in terms of normalized MoSta units [36], when applying the SVR model, the nearest neighbor, and a random model to the test set. The errors are calculated separately for the structural superclasses 1–4. The average error of the SVR model is in all four structural superclasses slightly lower than the average error of nearest neighbor algorithm and the random model (see median and 75th percentile).
Transferring PFMs between TFs
Prediction of PFMs for TFs with known PFM.
After deriving SVR models to predict PFM similarities, these models were used to transfer PFMs to TFs without PFMs (see Figure 3). Before applying this procedure, however, the average error of such PFM-transfers was estimated on the test dataset that contained 413 TFs with known PFM. The results of this analysis are depicted in Figure 6, along with the AAEs of a random model (Section ‘Prediction framework based on a random model’) and a nearest neighbor algorithm (Section ‘Prediction framework based on nearest neighbor algorithm’), which was additionally implemented in this work. The AAEs of the framework with the default parameters averaged over all TF classes is 0.12 on a scale from 0 to 2. In comparison, the average similarity (see Materials and Methods for details) between two PFMs that are randomly sampled from the same structural superclass is 0.64, indicating that the predicted performance of the SVR model is significantly higher than the performance expected by random guessing. Moreover, we observed that the average PFM similarity between two PFMs, which are associated with the same TF and result from different wet lab experiments, is approximately 0.1 in terms of normalized MoSta units [36]. Thus, against the background of this experimental variance, the SVR-based method hits the limits of what is possible with respect to the prediction accuracy. The SVR based approach yields slightly lower error rates in all structural superclasses (see median and 75 percentile in Figure 6). On average, however, also the nearest neighbor approach yields satisfying low errors. These outcomes confirm the findings of Alleyne et al., who suggested that for mouse homeodomain TFs nearest neighbor algorithm is well suited to predict binding profiles [31]. Our results suggest that this assumption also holds for the general case. The cause of these findings might be that the set of TFs without PFM is dominated by trivial cases, in which PFMs of orthologs from other organisms are available. The nearest neighbor algorithm might benefit for this reason. Examples of non-trivial cases are depicted in Figures S3 and S4. Furthermore, as additionally mentioned in the discussion, similarities learned by the SVR model correlate on the full similarity scope with the true PFM similarity of two PFMs (see Figure 4). Simple sequence similarity features, however, such as the domain similarities of two TFs with respect to the BLOSUM62 substitution matrix on which the nearest neighbor algorithm is base, weakly correlate with the true PFM similarity of two PFMs as depicted in Figure S2. The SVR model should be preferred in applications were besides the best matching TF also lower similarities or even dissimilarities are of interest. In conclusion, the strength of the novel approach proposed in this work is that this method computes a prediction score, which is highly correlated with the true PFM similarity of two TFs, by integrating various weakly correlated sequence similarity measures.
Prediction of PFMs for TFs with unknown PFM.
After estimating the AAE on the test sets, PFMs of TFs with previously unknown PFMs are predicted. Therefore, all 5 723 TFs without known PFM are used as input for the prediction framework (see Figure 3 and File S3). Please keep in mind that a transfer is only performed for query TFs that have a predicted PFM similarity to TFs with known PFM of at least 95% in terms of normalized mosta units [36]. With these settings the PFMs of 645 TFs were transferred. These TFs are distributed among the structural superclasses as follows: 166 basic domain (26.5%), 180 zinc finger (28.7%), 207 helix-turn-helix (33%), and 73 beta-scaffold (11.6%), where the percentage indicates the fraction of query TFs for which a reliable prediction could be made. This corresponds to an average transfer rate of 11.3% for any given query TF. All TFs along with their transferred PFMs are available in the File S1.
Examples of transferred PFMs.
PFM prediction examples for several TFs with unknown DNA-binding specificity are shown in Figure 7 (a). Besides two examples of trivial PFM transfers between DREB1 variants in A. thaliana two examples are given, where similar PFMs from different species are merged to consensus PFMs and transferred to the query TFs from H. sapiens and A. thaliana. One further example from this figure is HSF4 from A. thaliana which was predicted to have a similar binding specificity as HSF1 from S. cerevisiae. Thus, the respective PFM was transferred from HSF1 to HSF4. To visualize the DNA-binding domain similarity their aligned protein sequences are depicted in Figure 7 (c). This alignment shows that the HSF1 from S. cerevisiae contains eleven amino acids in the DNA-binding domain that cannot be aligned against the DNA-binding domain of HSF4 from A. thaliana. By analyzing the structure of the HSF1 DNA-binding domain, one can see that these amino acids are not contained in the canonical helix-turn-helix structure of HSF1 [40], and may therefore leave the DNA-binding specificity unaffected (see Figure 7 (b)). Thus, despite differences at the protein sequence level, HSF4 and HSF1 are strongly conserved at the DNA-binding domain level and are therefore likely to bind to similar regulatory sequences on the DNA [9]. In order to check this hypothesis, the transferred PFM for HSF4 is used to scan a set of co-expressed heat shock genes from A. thaliana for significantly enriched transcription factor binding sites (TFBSs). The heat shock gene cluster was obtained by clustering stress-response microarray data conducted by Kilian et al. [41]. In this work, Kilian et al. exposed A. thaliana shoot and root cells to heat and other stress conditions and conducted time-series to measure the transcriptional response. A set of 16 genes was found to be co-expressed under different heat stress conditions using EDISA [42] (see see Figure 7 (d)). Among these, 10 genes were found to be known heat shock genes by gene set enrichment analysis (corrected p-value ). Next, the promoter sequences of these genes were scanned for cis-regulatory modules using the ModuleMaster algorithm [29]. As explained in more detail in the Methods section (see ‘Application to sets of co-expressed genes’), ModuleMaster uses a multi-objective optimization approach to find TFBS enrichments in clusters of co-expressed genes. ModuleMaster found matches of the transferred PFM of HSF4 significantly enriched in the heat shock cluster, indicating a regulatory relationship between HSF4 and the heat shock genes, which is also confirmed by literature [43]. As additional source of evidence, the expression profile of HSF4 was found to be strongly correlated to the heat shock genes as detected by ModuleMaster (see yellow expression profile highlighted in Figure 7 (d)). The result of the cis-regulatory module detection is depicted in Figure 7 (e). Shown are promoter sequences (1500 bp upstream of TSS) of 5 heat shock cluster genes and the cis-regulatory module binding sites, respectively. The TFBSs associated with the HSF4 PFM are highlighted in yellow. A set of further non-trivial PFM predictions is depicted in Figures S3 and S4. A comprehensive list of all PFM predictions can be found in File S1.
(a) Depicted are five examples of PFMs that are transferred to the query TF. These transfers merge PFMs from different species and the final PFM is depicted as sequence logo. (b) Depicts the physical structure of the DNA-binding domain of HSF4 from A. thaliana [61] that is drawn with BallView [62]. (c) For HSF4, the query and the best matching TF are aligned with JalView and their DNA-binding domains are colored [63]. This alignment contains a gap consisting of eleven amino acids in the DNA-binding domain of the HSF1 from S. cerevisiae. The amino acids that constitute the gap in the alignment are drawn yellow within the physical structure (see (b)). From this structure it can be seen that the colored amino acids do not affect the canonical helix-turn-helix structure of the HSF that is responsible for specific DNA-binding [40]. (d) Depicts A. thaliana cluster of co-expressed genes that contains HSF4 and 15 other heat shock genes, which was derived with EDISA [42]. (e) Depicts promoter scans of these genes; several matches of the predicted HSF4 PFM were detected by ModuleMaster [29].
Discussion
In this work we presented a new method to transfer quantitative information between proteins, which is based on the assumption that similar DNA-binding domain sequences imply similar transcription factor binding specificities. To apply this method to the problem of transferring DNA-binding specificities between TFs, a comprehensive dataset covering PFMs, DNA-binding domain annotations, protein sequences and structural superclass annotations was compiled. This dataset gave insights into the current availability of DNA-binding specificity data and was the basis for training and evaluating our method. Thereby, several questions were approached: (1) Which sequence based score is a good quantitative indicator of PFM similarity? (2) How large is the quantitative error when transferring quantitative information to another protein? (3) Can this process be automated on large scale problems?
Regarding the first question, we found that the prediction of PFM similarity based on a single pairwise alignment is subject to large errors, when compared against our SVR models that were based on 30 features. The average error of the PFM similarity predictions was below 0.1 (on a scale from 0 to 2) for all structural superclasses, except others. Furthermore, we observed a high correlation between known and predicted functional similarities for the structural superclasses 1–4. Zinc finger, for instance, had a correlation of 80%. Hence, the prediction of functional similarity should be based on multiple features, at least in case of the given application.
Regarding the second question, the average absolute error of PFM-transfers on the test dataset was 0.12 with an average transfer rate of 11.3%. Thus, the transfers to the 5 723 TFs without PFM had a low coverage but high specificity and reliability. Overall, the presented framework could be used to predict the PFMs of 645 TFs with high accuracy, which are provided in File S1. This constitutes a significant improvement in the number of TFs with known PFMs. Even if the overall coverage remains low the SVR models allow to predict the PFM for any TF, whose annotated protein sequence and structural superclass is known.
In this work, we apply the presented framework to predict DNA-binding specificities to TFs with unknown PFMs. The approach is based on distance metric learning, i.e., we train a model to estimate the similarity of the DNA motifs recognized by two TFs, based on the similarity of their DNA binding domains. By using this model, we are able to identify TFs with known PFM which bind to similar DNA motifs than a particular TF of interest with unknown binding specificity. The PFMs of the TFs for which the highest PFM similarity to the TF of interest was predicted, are in turn merged to generate the predicted PFM. In order to assess how much the PFM prediction benefits from the combination of different sequence derived features through the SVR model, we additionally implemented a nearest neighbor based approach that screens the database of TFs with known PFMs and simply transfers the PFM from the one TF with the most similar binding domain sequence. The results from this comparison suggest on the one hand, that the SVR approach performs in all cases better than the nearest neighbor, but shows on the other hand, that the nearest neighbor approach often yields on average comparable results. It should be kept in mind that on average the similarity between two PFMs, which are associated with the same TF and result from different wet lab experiments, is approximately 0.1 in terms of normalized MoSta units [36]. Thus, on average both methods hit for some structural superclasses (i.e., helix-turn-helix) the limits of what is possible with respect to the prediction accuracy. A second advantage of the prediction framework presented in this work compared to nearest neighbor methods or similar approaches is the accurat similarity measure predicted by our approach, i.e., our method computes a prediction score which is highly correlated with the true PFM similarity of two TFs, by integrating various weakly correlated sequence similarity measures (see Figure 4). Conversely, the predictions performed by the nearest neighbor approach are directly resulting from a single weakly correlated feature, such as the domain similarities of two TFs with respect to the BLOSOM62 substitution matrix. As depicted in Figure S2, linear relationships between sequence similarity and PFM similarity of pairs of TFs only exist in regions above 90% sequence similarity. Similarities learned by the SVR model, however, correlate on the full similarity scope with the true PFM similarities (see Figure 4). Thus, the SVR model should be preferred in applications were not only the best matching TF, but also lower similarities or even dissimilarities are of interest. Furthermore, the SVR model constitutes a means of estimating the true PFM similarity of two TFs, even if their DNA binding profiles are both unknown. It thus serves as a starting point for further analyses, such as the hierarchical clustering of TFs based on the similarity of their PFMs and the computation of probalistic models in order to derive families of PFMs. These can subsequently be used as prior knowledge to increase the detection sensitivity of motif inference algorithms such as SOMBRERO [44], PRIORITY [45] or NestedMICA [46].
Materials and Methods
Models and datasets
DNA-binding specificity models.
PFMs model the DNA-binding specificity of TFs. They store position specific nucleotide frequencies in a matrix of size
, where
is the length of the binding motif and each row represents one nucleotide. For instance, entry
specifies the frequency of nucleotide
at position
in a multiple alignment of observed binding sites. Other common models are motifs in IUPAC (Union for Pure and Applied Chemistry) code or PWMs (Position Weight Matrices). PWMs are similar to PFMs, but they store the log-likelihood ratios of the nucleotide distributions and are often normalized with respect to background probabilities at each position. IUPAC representations model each position in the binding site through a IUPAC-letter that represents one or more nucleotides (e.g.,
).
Here, the standard representation are PFMs. To convert a PWM into a PFM, each entry is normalized by its column's sum, converting the number of occurrences into frequencies. To convert a IUPAC representation into a PFM, a column is constructed by giving all nucleotides of the respective IUPAC letter equal weight, again assigning frequencies to every nucleotide.
DNA-binding specificity databases.
Several databases exist that contain models of DNA-binding specificities for eukaryotes (e.g., PWMs, IUPAC motifs, or PFMs). An overview of the databases used in this work is given in Table 1. All models contained therein are retrieved and converted into PFMs. Thus, we obtain a list of TFs with one or more PFMs assigned. In TRANSFAC® some PFMs are associated with TF complexes or are marked as familial binding profiles; these entries are removed from the dataset, since these PFMs cannot be linked to one TF. The corresponding data is provided in the File S2, PFMs from TRANSFAC®, however, are removed from this file since they are proprietary.
Whenever multiple PFMs are available for one TF a consensus PFM is generated. For this purpose STAMP is used [37]. Initially, STAMP was developed to generate familial binding profiles (FBPs) for certain classes of TFs. Here, instead, STAMP will be used to integrate multiple PFMs that are associated with one TF. STAMP is applied with an ungapped Smith-Waterman alignment.
Protein sequences, DNA-binding domain annotations and TF-classifications.
For all TFs in TRANSFAC® the protein sequences, protein domain annotations and the structural classes are retrieved. TFs extracted from other databases are mapped to these TFs through their SwissProt identifier. To restrict protein annotations to DNA-binding domains, each protein domain is mapped to its respective GO-annotation in Pfam and only considered when classified as ‘DNA-binding’. In addition, the structural class of every TF is obtained from TRANSFAC® [34]. From this classification the superclass of every TF is extracted. If for any TF the protein sequence or DNA-binding domain is unavailable, the TF is removed from the dataset.
TFs without known PFM.
To predict novel PFMs for TFs a dataset containing TFs with unknown PFMs is compiled. In this dataset all TFs are used which have: no PFM, a protein sequence, a DNA-binding domain and a known structural superclass. Protein sequences and DNA-binding domain annotations are taken from UniProt [8].
Sequence and PFM similarity measures
Low-level similarity score for PFMs.
To compare two PFMs to each other their similarity (or distance) has to be quantified. Here, the ,
scores are used, which were published in 2008 by Pape et al. [36]. In this scoring system, for two PFMs
and
, the number of binding site overlaps with an offset
is determined on a random DNA sequence. This figure is then divided by the product of the individual binding site probabilities (Equation 1).
(1)
Thereby, denotes the frequency of
having a binding site that overlaps at the
-th position with a binding site of
. The terms
and
give the probabilies for an occurrence of an binding site for
and
under the background model
. The maximal similarity score
for two PFMs is calculated by considering all possible overlaps
in combination with the different orientations (sense
and antisense
) (Equation 2).
(2)
In some cases it is desirable to calculate the distance of two PFMs, rather than their similarity. To transform the similarity score into a distance measure the following formula is applied:
(3)
The ,
scores can be calculated for every TF pair with known PFMs and thus provide a label for supervised learning.
Sequence based similarity scores (features).
To derive a sequence based similarity measure that allows to predict PFM similarities, first several alignment based similarity scores are calculated, which constitute the basis for deriving the final similarity measure. Here, 30 low-level similarity measures (features) are derived that are based on local alignments of DNA-binding domains, flanking regions of DNA-binding domains, the alignment of secondary structure predictions and taxonomic distances. These alignments are performed with different substitution matrices and different alignment methods. As substitution matrices BLOSUM and PAM are used, as well as different physicochemical substitution matrices from the AAindex2 database [47]. As alignment methods Needleman-Wunsch and several kernel methods are used. The mismatch kernel, however, does not explicitly align the sequences. If multiple DNA-binding domains are annotated in one or both TFs all domains are compared to each other and the best similarity score is returned. In addition to these alignment based features the taxonomic distance of TFs is provided, which is taken from NCBI. All methods and parameters used to generate these features are shown in Table 2. Overall, for every pair of TFs a vector is obtained that has 30 entries (features), each providing a different measure of similarity.
Structuring and preprocessing the test and training datasets
Given the 30 sequence based low-level similarity scores (Table 2) and the label (
), the aim is to learn a model that predicts
when only provided with sequence based information
. As indicated earlier an SVR is employed to learn the optimal similarity score. This approach is applied separately for each TF superclass, since TFs from different superclasses are not expected to exhibit sufficient structural and functional similarity. Thus, the dataset is split according to the TF superclass annotations taken from TRANSFAC®. In addition, for each TF superclass, one third of all TFs are put aside as test dataset.
Before the SVR is applied several preprocessing steps are performed. First, all features and labels are normalized between -1 and 1, with the following formula:(4)
Thereby, denotes the similarity score calculated by comparing some property of two TFs
and
, whereas
and
denote the similarity score when comparing the respective TF to itself.
Learning the PFM similarity score
To learn the PFM similarity score all TF-pairs with a normalized BLOSUM62-score of their DNA-binding domains over 0.3 are considered for training, these are referred to as local TF-pairs (see Figure S2). Furthermore, TFs that have a similarity score of one are removed from the training and test set, to avoid learning TFs that have been assigned to the same PFM. For the remaining TF-pairs the similarity vectors
are calculated and combined into a training matrix with 30 columns (features), and one row for each considered TF-pair. For each row the label is calculated by the normalized
similarity score. Such a training dataset is constructed for each of the five TF superclasses.
Support vector regression.
To train the SVR model on these datasets cross-validation and parameter optimization are employed. On each training set a 5-fold cross-validation is performed with 10 runs of repeated random partitioning, hence a 10×5-fold cross-validation. This repeated cross-validation is intended to provide a robust regression error even when testing for different SVR parameters. As SVR method, the -SVR with RBF kernel is used. The SVR parameters
and
, and the RBF-kernel parameter
are optimized by a grid search. Thereby, the following parameters are considered
,
and
. To quantify a regression error for the predictions made by each SVR model the average absolute error (AAE) is calculated, on the test partitions of the cross-validation. After compiling the training set with this procedure for every structural superclass, the SVR is applied to each training set as described above. The final SVR model, for each structural superclass, is the model with the minimal AAE.
PFM prediction framework
Prediction framework based on the trained similarity measure.
The trained SVR models do not directly predict PFMs, but the similarity of the DNA-binding specificities of two TFs. To perform a PFM transfer a framework is implemented, which makes use of the trained SVR models. As input the algorithm expects the protein sequence of a query TF, with its annotated DNA-binding domain, the structural superclass and the species. Then the SVR model is used to predict the PFM similarity of the query TF to all TFs with known PFM in the same superclass, whenever their DNA-binding domain similarity exceeds 0.3 (normalized Needleman-Wunsch alignment score with BLOSUM62). This provides a list of TFs with predicted PFM similarities to the query TF. From this list all TFs with a predicted similarity under a certain threshold are removed (default: 0.95). From the remaining list the (default: 5) TFs with the highest predicted similarity are kept. If multiple PFMs remain after these filtering steps, an outlier detection is performed. Therefore, for each TF
, the average
-distance
to all other TFs in TF
is computed (Equation 5). Moreover, the average
-distance
of all TF-pairs is calculated (Equation 6). If for any TF
the ratio of its distance to the other TFs divided by the average overall distance (
) exceeds a certain threshold (default: 1.5) this TF is removed.
(5)
(6)
After removing the outlier PFMs, the remaining PFMs are merged into one FBP (using STAMP). This consensus PFM then constitutes the predicted DNA-binding consensus motif for the query TF. An overview of the framework is given in Figure 3. This framework is applied to all TFs in the dataset that contains TFs without PFMs (Section ‘TFs without known PFM’).
Prediction framework based on nearest neighbor algorithm.
To compare the prediction accuracy of our SVR-based method against a naive supervised learning approach, we implemented a prediction framework based on the nearest neighbor (NN) algorithm. The algorithm simply transfers the PFM of the TF for which the highest DNA-binding domain similarity to the given query factor was computed. The domain similarities were measured in terms of an alignment score with respect to the BLOSUM62 substitution matrix. As the SVM-based framework requires the existence of a TF with known PFM which has sufficient domain similarity to the given query TF, it did not permit the prediction of a PFM for the entirety of all TFs comprised by the evaluation set. However, to ensure a fair comparison we computed the AAE on the same number of TFs for the SVM-based and the NN-based framework. The included TFs were selected based on the predicted PFM similarity for the SVR method and based on the domain similarity score for the NN algorithm.
Prediction framework based on a random model.
To compare the SVR models against a random guesser, the prediction framework is implemented with random TF picks instead of the SVR model. This framework proceeds in the same manner as the SVR based framework, however, after determining the number of best matches the corresponding TFs are neglected and resampled from all TFs of the same structural superclass.
Validation of the SVR models and predicted PFMs
To validate the PFM prediction framework and the similarity scores their results are compared against the test dataset. First, the SVR models are tested for their ability to predict the PFM similarity of local TF-pairs. For this analysis the PFM similarity of all local TF-pairs in the training datasets are predicted with the respective SVR model and compared against the known PFMs. To assess the quality of the predictions the Pearson correlation coefficient and the AAE are calculated for each structural superclass. The PFM prediction framework is validated by performing a PFM prediction for every TF in the test dataset, and comparing the result against the corresponding annotated PFM by means of the
similarity score. The AAE for a respective structural superclass consisting of
query TFs is calculated as follows (Equation 7)
(7)where
gives the
-normalized distance between predicted and known PFMs in MoSta units [36].
Application to sets of co-expressed genes
In subsequent computational analyzes, known and predicted PFMs of different organisms were used to scan clusters of co-expressed genes from microarray data sets for cis-regulatory modules (CRMs). CRMs are sets of transcription factor binding sites (TFBSs), which are found in physical proximity on promoter sequences of co-expressed genes and are often used to detect regulatory relationships [48]–[50]. In this work, we use the ModuleMaster algorithm for CRM detection [29].
ModuleMaster retrieves promoter sequences from the Ensembl database [51] for all genes within each cluster of co-expressed genes. Next, the predicted PFMs are converted to PWMs and together with PWMs (see RSA-tools for details [52]) from YEASTRAC [53], JASPAR [54] and TRANSFAC® [34] used to scan through these promoter sequences. Furthermore, binding motifs provided by the PLACE transcription factor binding database were integrated [55]. In order to derive the binding score of a single PWM on subsequence
of sequence
, ModuleMaster calculates weight scores, which were first introduced by Aerts et al.
(8)where
is the nucleotide found at position
in the subsequence
,
is the probability of finding
according to PWM
and
is the probability of finding
according to the background model
. As background model, sequences from a
-order hidden Markov model that was derived from coding sequences of the respective organism were used.
is a parameter that gives the length of the respective binding site. There are three different strategies to calculate appropriate individual cutoff levels, which minimize the amount of false positive and/or false negative hits, as proposed by Kel et al.: (1) Minimization of false negatives, (2) Minimization of false positives, (3) Minimization of a combination of both [56]. The second cutoff strategy was used to pre-calculate individual weight score cutoff values for all PWMs. These individual cutoff values are used during matrix scan in order to decide, if a match at a certain position within the promoter sequence should be counted as TFBS or not. After matrix scan, ModuleMaster searches for CRMs using a multi-objective genetic algorithm that takes the weight scores and multi-variate correlations between TFs and target genes on the expression level into account.
Implementation and availability
The core of the prediction framework, from which various libraries and external programs are called, is implemented in Java. The source code of the prediction framework is licensed under the GPL 3 and available at http://code.google.com/p/pfmprediction/.
The alignments are performed with BioJava [57]. similarity scores are calculated with the program MoSta provided by Pape et al. [36].
The PWMs are merged with a local copy of STAMP, obtained from Mahony et al. [37]. To train the SVR model LIBSVM was used (available at http://www.csie.ntu.edu.tw/~cjlin/libsvm). A C-implementation of the local alignment kernel was provided by Saigo et al. [58]. Leslie et al. provided source code for the calculation of the mismatch kernel [59]. An implementation of the SVM pairwise score was obtained from Liao et al. [60].
Supporting Information
Figure S1.
Distribution of TFs with and without PFMs for six different species. The absolute numbers of TFs per species are taken from the work of Wilson et al. (www.transcriptionfactor.org) and reflect TFs predicted by HMMs. The number of known PFMs is taken from the integrated dataset compiled in this work (see File S3) and compared to the number of transferred PFMs. The availability of PFMs heavily depends on the species of interest. S. cerevesiae, for instance, has the best coverage of TFs with known DNA-binding specificities, whereas for H. sapiens the largest number of PFMs are available. Interestingly, the number of newly predicted PFMs is highest for M. musculus and H. sapiens and worst for S. cerevisiae.
https://doi.org/10.1371/journal.pone.0013876.s001
(2.25 MB TIF)
Figure S2.
Sequence versus PFM similarities for all TF pairs. Depicted are sequence similarities of DNA-binding domains versus PFM similarities for different structural superclasses. To learn the PFM similarity score, all TF pairs with a normalized BLOSUM62-score of their DNA-binding domains over 0.3 are considered for training; these are referred to as local TF-pairs.
https://doi.org/10.1371/journal.pone.0013876.s002
(2.84 MB TIF)
Figure S3.
Set of non-trivial example predictions. Depicted are several examples of non-trivial PFM transferrers from the test set, for which the prediction error is estimated. The best matches, i.e., the TFs for which a PFM similarity above a predefined threshold (default: 0.95) was predicted, are merged to a consensus PFM using STAMP. The predicted PFM similarity for each best match is given in brackets. Depicted are the sequence logos of the merged consensus PFM. The prediction error in terms of normalized MoSta units quantifies the distance between known and predicted PFMs.
https://doi.org/10.1371/journal.pone.0013876.s003
(3.19 MB TIF)
Figure S4.
Examples of non-trivial PFM transfers between TFs from distinct classes. This figure shows sequence logos, PFM similarity scores and TF class affiliations where either one (first column) or all best matches (second column) belong to a different TF class than the query TF. We found that for 51 TFs (70%) of the query TFs all of the predicted best matches belong to the same TF class. For the remaining 12 TFs (30%), we observed that at least one of the best matches was from another class than the query TF and for 6 of these 12 TFs (15%) we found that all best matches were from another class. In most of these cases PFMs of TFs of class 1.2. (Helix-loop-helix (bHLH)) were transfered to TFs of class 1.3. (leucine zipper (bHLH-ZIP)) and vice versa.
https://doi.org/10.1371/journal.pone.0013876.s004
(0.50 MB TIF)
File S1.
Predicted TFs. File S1 contains all 645 TFs for which PFM transfers were performed by our prediction framework. For each TF various annotations are provided, i.e., UniProt ID, species information, protein sequence, DNA-binding domain annotation and the ID of the best matching PFM that was predicted by our method. All PFM models are listed in File S2.
https://doi.org/10.1371/journal.pone.0013876.s005
(0.52 MB TXT)
File S2.
Binding specificity models. The integrated PFM-dataset containing all PFM models of the test and trainings sets is provided in File S2. For the models from TRANSFAC Professional no matrix is given as they are proprietary.
https://doi.org/10.1371/journal.pone.0013876.s006
(0.71 MB TXT)
File S3.
All query TFs in input format. File S3 contains all 5723 TFs without experimentally derived PFMs but annotated DNA-binding domains. This dataset was used as input file for the prediction framework presented in this work.
https://doi.org/10.1371/journal.pone.0013876.s007
(4.21 MB TXT)
Acknowledgments
We would like to thank Alexander Auch for providing the taxonomic distances, Andreas Dräger for his general support and Richard Bonneau for giving conceptual support at the beginning of this work.
Author Contributions
Conceived and designed the experiments: AS JS DW AZ. Performed the experiments: Johannes Eichner. Analyzed the data: AS JE JE. Contributed reagents/materials/analysis tools: Jonas Eichner CH. Wrote the paper: AS JS.
References
- 1. Liolios K, Mavromatis K, Tavernarakis N, Kyrpides NC (2008) The genomes on line database (gold) in 2007: status of genomic and metagenomic projects and their associated metadata. Nucleic Acids Res 36: D475–D479.
- 2. Baldi P, Chauvin Y, Hunkapiller T, McClure MA (1994) Hidden markov models of biological primary sequence information. Proc Natl Acad Sci U S A 91: 1059–1063.
- 3. Mungall CJ, Misra S, Berman BP, Carlson J, Frise E, et al. (2002) An integrated computational pipeline and database to support whole-genome sequence annotation. Genome Biol 3: RESEARCH0081.
- 4. Maerkl SJ, Quake SR (2007) A systems approach to measuring the binding energy landscapes of transcription factors. Science 315: 233–237.
- 5. Newburger DE, Bulyk ML (2009) Uniprobe: an online database of protein binding microarray data on protein-dna interactions. Nucleic Acids Res 37: D77–D82.
- 6. Badis G, Berger MF, Philippakis AA, Talukder S, Gehrke AR, et al. (2009) Diversity and complexity in dna recognition by transcription factors. Science 324: 1720–1723.
- 7. Matys V, Fricke E, Geffers R, Gössling E, Haubrock M, et al. (2003) Transfac: transcriptional regulation, from patterns to profiles. Nucleic Acids Res 31: 374–378.
- 8. Boutet E, Lieberherr D, Tognolli M, Schneider M, Bairoch A (2007) Uniprotkb/swiss-prot: The manually annotated section of the uniprot knowledgebase. Methods Mol Biol 406: 89–112.
- 9. Liu XD, Liu PC, Santoro N, Thiele DJ (1997) Conservation of a stress response: human heat shock transcription factors functionally substitute for yeast hsf. EMBO J 16: 6466–6477.
- 10. Gerlt JA, Babbitt PC (2000) Can sequence determine function? Genome Biol 1: REVIEWS0005.
- 11. Prakash A, Tompa M (2005) Discovery of regulatory elements in vertebrates through comparative genomics. Nat Biotechnol 23: 1249–1256.
- 12. Bork P, Dandekar T, Diaz-Lazcoz Y, Eisenhaber F, Huynen M, et al. (1998) Predicting function: from genes to genomes and back. J Mol Biol 283: 707–725.
- 13. Bock C, Walter J, Paulsen M, Lengauer T (2007) Cpg island mapping by epigenome prediction. PLoS Comput Biol 3: e110.
- 14. Andrade MA, Brown NP, Leroy C, Hoersch S, de Daruvar A, et al. (1999) Automated genome sequence analysis and annotation. Bioinformatics 15: 391–412.
- 15. Kretschmann E, Fleischmann W, Apweiler R (2001) Automatic rule generation for protein annotation with the c4.5 data mining algorithm applied on swiss-prot. Bioinformatics 17: 920–926.
- 16. Hegyi H, Gerstein M (2001) Annotation transfer for genomics: measuring functional divergence in multi-domain proteins. Genome Res 11: 1632–1640.
- 17. Leontovich AM, Tokmachev KY, van Houwelingen HC (2008) The comparative analysis of statistics, based on the likelihood ratio criterion, in the automated annotation problem. BMC Bioinformatics 9: 31.
- 18. Engelhardt BE, Jordan MI, Muratore KE, Brenner SE (2005) Protein molecular function prediction by bayesian phylogenomics. PLoS Comput Biol 1: e45.
- 19. Jensen LJ, Gupta R, Staerfeldt HH, Brunak S (2003) Prediction of human protein function according to gene ontology categories. Bioinformatics 19: 635–642.
- 20. Juncker A, Jensen L, Pierleoni A, Bernsel A, Tress M, et al. (2009) Sequence-based feature prediction and annotation of proteins. Genome Biol 10: 206.
- 21. Stegmaier P, Kel AE, Wingender E (2004) Systematic dna-binding domain classification of transcription factors. Genome Inform 15: 276–286.
- 22. von Hippel PH, Berg OG (1986) On the specificity of dna-protein interactions. PNAS 83: 1608–12.
- 23. Gerland U, Moroz JD, Hwa T (2002) Physical constraints and functional characteristics of transcription factor-dna interaction. Proc Natl Acad Sci U S A 99: 12015–12020.
- 24. Sarai A, Kono H (2005) Protein-dna recognition patterns and predictions. Annu Rev Biophys Biomol Struct 34: 379–398.
- 25. Foat BC, Morozov AV, Bussemaker HJ (2006) Statistical mechanical modeling of genome-wide transcription factor occupancy data by matrixreduce. Bioinformatics 22: e141–e149.
- 26. Roider HG, Kanhere A, Manke T, Vingron M (2007) Predicting transcription factor affinities to dna from a biophysical model. Bioinformatics 23: 134–141.
- 27. Bonneau R, Reiss DJ, Shannon P, Facciotti M, Hood L, et al. (2006) The inferelator: an algorithm for learning parsimonious regulatory networks from systems-biology data sets de novo. Genome Biol 7: R36.
- 28. Rodionov DA (2007) Comparative genomic reconstruction of transcriptional regulatory networks in bacteria. Chem Rev 107: 3467–3497.
- 29. Wrzodek C, Schröder A, Dräger A, Wanke D, Berendzen KW, et al. (2010) ModuleMaster: a new tool to decipher transcriptional regulatory networks. Biosystems 99: 79–81.
- 30. Sandelin A, Alkema W, Engström P, Wasserman WW, Lenhard B (2004) Jaspar: an open-access database for eukaryotic transcription factor binding profiles. Nucleic Acids Res 32: D91–D94.
- 31. Alleyne TM, na Castillo LP, Badis G, Talukder S, Berger MF, et al. (2009) Predicting the binding preference of transcription factors to individual dna k-mers. Bioinformatics 25: 1012–1018.
- 32. Alamanova D, Stegmaier P, Kel A (2010) Creating pwms of transcription factors using 3d structure-based computation of protein-dna free binding energies. BMC Bioinformatics 11: 225.
- 33.
Shental N, Weinshall D (2003) Learning distance functions using equivalence relations. pp. 11–18.
- 34. Wingender E (1997) Classification of eukaryotic transcription factors. Mol Biol (Mosk) 31: 584–600.
- 35. Wilson D, Charoensawan V, Kummerfeld SK, Teichmann SA (2008) Dbd–taxonomically broad transcription factor predictions: new content and functionality. Nucleic Acids Res 36: D88–D92.
- 36. Pape UJ, Rahmann S, Vingron M (2008) Natural similarity measures between position frequency matrices with an application to clustering. Bioinformatics 24: 350–357.
- 37. Mahony S, Auron PE, Benos PV (2007) Dna familial binding profiles made easy: comparison of various motif alignment and clustering strategies. PLoS Comput Biol 3: e61.
- 38. Pearson K (1901) On lines and planes of closest fit to systems of points in space. Philosophical Magazine 2: 559–572.
- 39.
Zhou D, Weston J, Gretton A, Bousquet O, Schölkopf B (2004) Ranking on data manifolds. Advances in Neural Information Processing Systems 16. MIT Press.
- 40. Harrison CJ, Bohm AA, Nelson HC (1994) Crystal structure of the dna binding domain of the heat shock transcription factor. Science 263: 224–227.
- 41. Kilian J, Whitehead D, Horak J, Wanke D, Weinl S, et al. (2007) The atgenexpress global stress expression data set: protocols, evaluation and model data analysis of uv-b light, drought and cold stress responses. Plant J 50: 347–363.
- 42. Supper J, Strauch M, Wanke D, Harter K, Zell A (2007) Edisa: extracting biclusters from multiple time-series of gene expression profiles. BMC Bioinformatics 8: 334.
- 43. Akerfelt M, Trouillet D, Mezger V, Sistonen L (2007) Heat shock factors at a crossroad between stress and development. Ann N Y Acad Sci 1113: 15–27.
- 44. Mahony S, Golden A, Smith TJ, Benos PV (2005) Improved detection of dna motifs using a self-organized clustering of familial binding profiles. Bioinformatics 21: Suppl 1i283–i291.
- 45. Narlikar L, Gordân R, Ohler U, Hartemink AJ (2006) Informative priors based on transcription factor structural class improve de novo motif discovery. Bioinformatics 22: e384–e392.
- 46. Piipari M, Down TA, Hubbard TJ (2010) Metamotifs–a generative model for building families of nucleotide position weight matrices. BMC Bioinformatics 11: 348.
- 47. Kawashima S, Pokarowski P, Pokarowska M, Kolinski A, Katayama T, et al. (2008) Aaindex: amino acid index database, progress report 2008. Nucleic Acids Res 36: D202–D205.
- 48. Aerts S, Van Loo P, Thijs G, Mayer H, de Martin R, et al. (2005) TOUCAN 2: the all-inclusive open source workbench for regulatory sequence analysis. Nucl Acids Res 33: W393–396.
- 49. Li H, Zhan M (2008) Unraveling transcriptional regulatory programs by integrative analysis of microarray and transcription factor binding data. Bioinformatics 24: 1874–1880.
- 50. Loo PV, Aerts S, Thienpont B, Moor BD, Moreau Y, et al. (2008) ModuleMiner - improved computational detection of cis-regulatory modules: are there different modes of gene regulation in embryonic development and adult tissues? Genome Biol 9: R66.
- 51. Flicek P, Aken BL, Beal K, Ballester B, Caccamo M, et al. (2008) Ensembl 2008. Nucleic Acids Res 36: D707–D714.
- 52. Turatsinze JV, Thomas-Chollier M, Defrance M, van Helden J (2008) Using rsat to scan genome sequences for transcription factor binding sites and cis-regulatory modules. Nat Protoc 3: 1578–1588.
- 53. Teixeira MC, Monteiro P, Jain P, Tenreiro S, Fernandes AR, et al. (2006) The yeastract database: a tool for the analysis of transcription regulatory associations in saccharomyces cerevisiae. Nucleic Acids Res 34: D446–D451.
- 54. Bryne JC, Valen E, Tang MHE, Marstrand T, Winther O, et al. (2008) Jaspar, the open access database of transcription factor-binding profiles: new content and tools in the 2008 update. Nucleic Acids Res 36: D102–D106.
- 55. Higo K, Ugawa Y, Iwamoto M, Korenaga T (1999) Plant cis-acting regulatory dna elements (place) database: 1999. Nucleic Acids Res 27: 297–300.
- 56. Kel A, Gossling E, Reuter I, Cheremushkin E, Kel-Margoulis O, et al. (2003) MATCHTM: a tool for searching transcription factor binding sites in DNA sequences. Nucl Acids Res 31: 3576–3579.
- 57. Holland RCG, Down TA, Pocock M, Prlic A, Huen D, et al. (2008) Biojava: an open-source framework for bioinformatics. Bioinformatics 24: 2096–2097.
- 58. Saigo H, Vert JP, Ueda N, Akutsu T (2004) Protein homology detection using string alignment kernels. Bioinformatics 20: 1682–1689.
- 59. Leslie CS, Eskin E, Cohen A, Weston J, Noble WS (2004) Mismatch string kernels for discriminative protein classification. Bioinformatics 20: 467–476.
- 60. Liao L, Noble WS (2003) Combining pairwise sequence similarity and support vector machines for detecting remote protein evolutionary and structural relationships. J Comput Biol 10: 857–868.
- 61. Kopp J, Schwede T (2004) The swiss-model repository of annotated three-dimensional protein structure homology models. Nucleic Acids Res 32: D230–D234.
- 62. Moll A, Hildebrandt A, Lenhof HP, Kohlbacher O (2005) Ballview: an object-oriented molecular visualization and modeling framework. J Comput Aided Mol Des 19: 791–800.
- 63. Waterhouse AM, Procter JB, Martin DMA, Clamp M, Barton GJ (2009) Jalview version 2 - a multiple sequence alignment editor and analysis workbench. Bioinformatics.
- 64. Matys V, Kel-Margoulis OV, Fricke E, Liebich I, Land S, et al. (2006) Transfac and its module transcompel: transcriptional gene regulation in eukaryotes. Nucleic Acids Res 1: 34: D108–D110.
- 65. Zhu J, Zhang MQ (1999) SCPD: a promoter database of the yeast Saccharomyces cerevisiae. Bioinformatics 15: 607–611.
- 66. Davuluri RV, Sun H, Palaniswamy SK, Matthews N, Molina C, et al. (2003) AGRIS: Arabidopsis gene regulatory information server, an information resource of Arabidopsis cis-regulatory elements and transcription factors. BMC Bioinformatics 4: 25.
- 67. Bergman CM, Carlson JW, Celniker SE (2005) Drosophila dnase i footprint database: a systematic genome annotation of transcription factor binding sites in the fruitfly, drosophila melanogaster. Bioinformatics 21: 1747–1749.
- 68. Needleman SB, Wunsch CD (1970) A general method applicable to the search for similarities in the amino acid sequence of two proteins. J Mol Biol 48: 443–453.
- 69. Henikoff S, Henikoff JG (1992) Amino acid substitution matrices from protein blocks. Proc Natl Acad Sci U S A 89: 10915–10919.
- 70. Dayhoff MO, Schwartz RM, Orcutt BC (1978) A model of evolutionary change in proteins. In Atlas of Protein Sequences and Structure 5: 345–352.
- 71. Lüthy R, McLachlan AD, Eisenberg D (1991) Secondary structure-based profiles: use of structure-conserving scoring tables in searching protein sequence databases for structural similarities. Proteins 10: 229–239.
- 72. Mehta PK, Heringa J, Argos P (1995) A simple and fast approach to prediction of protein secondary structure from multiply aligned sequences with accuracy above 70%. Protein Sci 4: 2517–2525.
- 73. Miyazawa S, Jernigan RL (1993) A new substitution matrix for protein sequence searches based on contact frequencies in protein structures. Protein Eng 6: 267–278.
- 74. Miyata T, Miyazawa S, Yasunaga T (1979) Two types of amino acid substitutions in protein evolution. J Mol Evol 12: 219–236.
- 75. Niefind K, Schomburg D (1991) Amino acid similarity coefficients for protein modeling and sequence alignment derived from main-chain folding angles. J Mol Biol 219: 481–497.
- 76. Risler JL, Delorme MO, Delacroix H, Henaut A (1988) Amino acid substitutions in structurally related proteins. a pattern recognition approach. determination of a new and efficient scoring matrix. J Mol Biol 204: 1019–1029.
- 77. Wei L, Altman RB, Chang JT (1997) Using the radial distributions of physical features to compare amino acid environments and align amino acid sequences. Pac Symp Biocomput 465–476.
- 78. Saigo H, Vert JP, Akutsu T (2006) Optimizing amino acid substitution matrices with a local alignment kernel. BMC Bioinformatics 7: 246.
- 79. Wheeler DL, Barrett T, Benson DA, Bryant SH, Canese K, et al. (2008) Database resources of the national center for biotechnology information. Nucleic Acids Res 36: D13–D21.