Figures
Figure 2, "Accuracy of in-plane tractions as a function of Poisson's ratio when out-of-plane components of displacements are neglected" is incorrect. The correct file can be found here:
The color bar in Figure 4, "Balance of forces considered in MSM" is incorrectly displayed to range from 0 to 15Pa. Correct range is 0 to 150Pa. The correct version of Figure 4 can be found here:Citation: Tambe DT, Croutelle U, Trepat X, Park CY, Kim JH, Millet E, et al. (2014) Correction: Monolayer Stress Microscopy: Limitations, Artifacts, and Accuracy of Recovered Intercellular Stresses. PLoS ONE 9(1): 10.1371/annotation/d29aed40-7667-4901-8008-ef473c363216. https://doi.org/10.1371/annotation/d29aed40-7667-4901-8008-ef473c363216
Published: January 17, 2014
Copyright: © 2014 . This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Competing interests: No competing interests declared.