Advertisement
Research Article

The Crystal Structure of the Escherichia coli Autoinducer-2 Processing Protein LsrF

  • Zamia Diaz,

    Affiliation: Department of Chemistry and Biochemistry, Swarthmore College, Swarthmore, Pennsylvania, United States of America

    X
  • Karina B. Xavier,

    Affiliations: Instituto Gulbenkian de Ciência, Oeiras, Portugal, Instituto de Tecnologia Química e Biológica, Estação Agronómica Nacional, Oeiras, Portugal

    X
  • Stephen T. Miller mail

    smiller1@swarthmore.edu

    Affiliation: Department of Chemistry and Biochemistry, Swarthmore College, Swarthmore, Pennsylvania, United States of America

    X
  • Published: August 28, 2009
  • DOI: 10.1371/journal.pone.0006820

Abstract

Many bacteria produce and respond to the quorum sensing signal autoinducer-2 (AI-2). Escherichia coli and Salmonella typhimurium are among the species with the lsr operon, an operon containing AI-2 transport and processing genes that are up regulated in response to AI-2. One of the Lsr proteins, LsrF, has been implicated in processing the phosphorylated form of AI-2. Here, we present the structure of LsrF, unliganded and in complex with two phospho-AI-2 analogues, ribose-5-phosphate and ribulose-5-phosphate. The crystal structure shows that LsrF is a decamer of (αβ)8-barrels that exhibit a previously unseen N-terminal domain swap and have high structural homology with aldolases that process phosphorylated sugars. Ligand binding sites and key catalytic residues are structurally conserved, strongly implicating LsrF as a class I aldolase.

Introduction

Many bacterial species control expression of specific genes thorough the production, release, and detection of small signal molecules called autoinducers. This process, termed quorum sensing, allows bacteria to regulate behavior in a population-dependant manner, effectively coordinating their activity. Behaviors regulated by quorum sensing include bioluminescence, biofilm formation, and production of virulence factors [1].

While autoinducer production and recognition is generally species specific, autoinducer-2 (AI-2) has been shown to be produced and recognized by a variety of bacterial species, both Gram-positive and Gram-negative. First identified as a regulator of bioluminescence in Vibrio harveyi [2], [3], AI-2 has been shown to control a wide variety of behaviors in different species, including motility in Helicobacter pylori [4], division, stress response, and biofilm formation in Streptococcus mutans [5], [6], virulence and formation of biofilms in Vibrio cholerae [7][9] and Staphylococcus epidermis [10], social and pluricellular behavior of Bacillus subtilis [11], and virulence in Erwinia carotovora ssp. carotovora [12]. Since many species produce and respond to AI-2, it is believed to facilitate interspecies communication, potentially allowing bacteria to modulate gene expression in response to both the concentration and species composition of bacteria in the local environment; indeed, some species of bacteria have been shown to respond to AI-2 produced by other species in co-culture experiments [13], [14].

AI-2 is produced by the highly conserved synthase LuxS, which catalyzes the production of 4,5-dihydroxy-2,3-pentanedione (DPD) from S-ribosylhomocysteine [2]. Crystal structures of AI-2 receptor/ligand complexes from V. harveyi [15], S. typhimurium [16], and S. meliloti [13] have shown that these species recognize chemically distinct DPD adducts as AI-2: (2S, 4S)-2-methyl-2,3,3,4-tetrahydroxyterahydro​furan-boratein the case of V. harveyi and (2R, 4S)-2-methyl-2,3,3,4-tetrahydroxyterahydro​furanin the case of S. typhimurium and S. meliloti. The known forms of AI-2 are able to interconvert spontaneously in solution, suggesting that a mix of DPD-derived molecules exists in environments with LuxS-containing bacteria [16]; however, because the different forms of AI-2 can interconvert, bacteria that recognize chemically distinct forms of AI-2 can nonetheless communicate with each other [14].

While AI-2 has been shown to act as a signaling molecule in many bacterial species [17], [18], the molecular details of AI-2 recognition and response have been studied in only a small number of species including E. coli [19], [20], S. typhimurium [21], [22], Sinorhizobium meliloti [13], V. cholerae [9], [23][25], and V. harveyi [3], [15], [26], [27]. E. coli and S. typhimurium share an operon, named lsr (for LuxS Regulated), that consists of lsrA, lsrB, LsrC, lsrD, lsrF, and lsrG (and, in the case of S. typhimurium, lsrE) and is responsible for the recognition and transport of AI-2. (Two additional genes involved in regulation of the lsr operon, lsrR and lsrK, are adjacent but are transcribed divergently.) These species internalize AI-2 via an ABC transporter complex comprised of LsrA, LsrB, LsrC, and LsrD [19], [22]. Once internalized, AI-2 is phosphorylated at the C5 position by the kinase LsrK, giving rise to phospho-AI-2 (P-AI-2, Fig. 1) [20], [21]. It is this phosphorylated form of AI-2 that binds to the repressor LsrR, inactivating repression and increasing transcription of the lsr operon; thus, the operon acts as a positive feedback loop, importing more AI-2 in response to detection of P-AI-2 [20]. Two additional genes in the lsr operon, lsrF and lsrG, are present in both E. coli and S. typhimurium and have been implicated in AI-2 processing while a final gene, lsrE, is found in the S. typhimurium lsr operon but not in E. coli [21]. lsrE has homology to epimerases, but deleting lsrE in S. typhimurium has no detectable impact on AI-2 uptake or transcription of the lsr operon.

thumbnail

Figure 1. Structures of phospho-AI-2 and two analogues, ribulose-5-phosphate and ribose-5-phosphate.

doi:10.1371/journal.pone.0006820.g001

Previous genetic studies demonstrated that the LsrF and LsrG proteins are involved in terminating the AI-2-depent induction of the lsr operon. Mutants lacking LsrF or LsrG show increased transcription of the lsr operon, suggesting that these proteins process P-AI-2, thus reducing the concentration of P-AI-2 in the cell and restoring the repressor function of lsrR. Importantly, the increase in lsr transcription observed in the absence of LsrF or LsrG is AI-2 dependent, and over-production of LsrF or LsrG decreases the transcription of the operon to levels lower than in the wild type. The suggestion that LsrF plays a role in P-AI-2 processing is further supported by sequence homology with aldolase enzymes that process phosphorylated sugars [21]. Subsequent studies have shown that LsrG does, in fact, catalyze a reaction with P-AI-2 as a substrate, yielding 2-phosphoglycolic acid and an additional, as yet unidentified three-carbon fragment, raising the possibility that LsrF does not act directly upon P-AI-2 but rather a product of the LsrG reaction or another P-AI-2 adduct [20].

Aldolases catalyze the formation or cleavage of carbon-carbon bonds and are classified in two families based on their mechanism [28]. Class I aldolases act through the formation of a Schiff base with the substrate, while class II aldolases require metal co-factors. The best studied of the class I aldolases is fructose-1,6-bisphosphate aldolase (FBPA), which catalyzes the cleavage of fructose-1,6-bisphosphate into glyceraldehyde-3-phosphate and dihydroxyacetone phosphate in glycolysis. Crystal structures have been determined for FBPA [29], [30] and a variety of other class I aldolases including 2-amino-3,7-dideoxy-D-threo-hept-6-ulosonic acid (ADH) synthase, which catalyzes a transaldol reaction of 6-deoxy-5-ketofructose-1-phosphate with L-aspartate semialdehyde to yield ADH [31], and D-2-deoxyribose-5-phosphate aldolase (DERA), which catalyzes the reversible aldol reaction between acetaldehyde and D-glyceraldehyde-3-phosphate to generate D-2-dexoyribose-5-phosphate [32]. These structures reveal that the class I aldolases share a common fold, classified as a TIM α/β-barrel in SCOP [33], and a structurally conserved catalytic lysine responsible for Schiff base formation.

While sequence analysis suggests that LsrF will function as a class I aldolase and genetic data suggests LsrF is involved in P-AI-2 processing, the details of the role LsrF plays in processing P-AI-2 are not known [21]. To begin addressing this question, we have determined the crystal structure of LsrF, alone and in complex with the P-AI-2 analogues ribose-5-phosphate and ribulose-5-phosphate (Fig. 1). The structure reveals a decameric complex of TIM α/β-barrels. Despite strong structural homology to FBPA from Thermoproteus tenax and ADH synthase from Methanocaldococcus jannaschii, the subunits participate in a form of domain swapping previously unseen in aldolase complexes. Key catalytic residues in these class I aldolases are structurally conserved in LsrF, and both P-AI-2 analogues bind LsrF in the canonical aldolase active site, strongly implicating LsrF as a class I aldolase.

Results

LsrF Structure

LsrF crystallizes as a decamer with each monomer having an (αβ)8-barrel fold (Fig. 2a), a ubiquitous fold commonly seen in proteins catalyzing aldolase reactions [28]. In a departure from the typical (αβ)8-barrel fold, the first β-strand of the LsrF barrel does not start until residue 51. Instead, the first 25 residues of the chain extend away from the barrel and pack against other subunits in a form of domain swapping previously unseen in aldolases (Figs. 2b and 3b). (There is no interpretable density for residues 1–9, but the orientation of adjacent residues make it impossible for these residues to pack against the (αβ)8-barrel of their own chain.) After a short coil, residues 34–43 (α0) form an α-helix that both caps the bottom of the barrel and makes extensive interactions with neighboring monomers (Figs. 2a, 2c, and 4). Following the first β-strand, the (αβ)8-barrel fold is briefly interrupted by a small stretch of α-helix (residues 59–62, α1a) that packs against a neighboring monomer. A relatively large loop joins β3 to α3 and is bounded by two short β-strands (residues 109–110, β3a, and 122–123, β3b) that anchor this loop. The canonical (αβ)8-barrel then continues until a final interruption when residues 254–257 (α8a) form an α-helix prior to α8. After the final helix of the (αβ)8-barrel, the C-terminal residues form an α-helix (α8b) that largely lies in the groove between the seventh and eighth helices of the barrel.

thumbnail

Figure 2. Structure of a single LsrF chain.

A. Stereoview of a single (α/β)8-barrel subunit with protein backbone in cartoon representation and bound P-AI-2 analogue (ribulose-5-phosphate) as ball-and-stick. The protein backbone is rainbow colored, with blue at the N-terminus and red at the C-terminus. B. Rotated view of the subunit (approximately 90°) highlighting the N-terminal residues that extend away from the (αβ)8-barrel and are swapped with the adjacent 2-fold related subunit. C. Identification of the components of the (αβ)8-barrel, with α-helices as blue cylinders and β-sheets as red arrows. The bound ligand (ribulose-5-phosphate) is shown in ball-and-stick format.

doi:10.1371/journal.pone.0006820.g002
thumbnail

Figure 3. Structure of the LsrF decamer.

A. Surface representation of the LsrF decamer, viewed down the 5-fold symmetry axis, with each monomer a different color. The bound ligand (ribose-5-phosphate) is visible in the center of the (αβ)8-barrel, and is shown in ball-and-stick format. B. Perpendicular view of the LsrF decamer along a two-fold axis.

doi:10.1371/journal.pone.0006820.g003
thumbnail

Figure 4. Structure-based sequence alignment highlights conservation of binding-site and potential catalytic residues.

Structure-based alignments [47] were calculated for LsrF with rabbit FBPA (1J4E), T. tenax FBPA (1OK4), and M. jannaschii ADH synthase (2QJG). Identical residues are in white on red, conserved residues are in red (boxed). Secondary structure (from LsrF) is indicated above the sequence: blue bars are α-helices and red arrows are β-sheets. Residues implicated as either hydrogen bonding to the ligand phosphate or catalytic are indicated with an asterisk; these residues are disproportionately conserved. Numbering follows the LsrF sequence.

doi:10.1371/journal.pone.0006820.g004

The LsrF oligmer has a disk-like structure, with two rings of five monomers stacked on top of each other giving rise to a decamer with D5 symmetry (Fig. 3). Each ring has a diameter of approximately 110 Å and has a central pore of about 15 Å diameter. Monomers make extensive contacts with the two adjacent subunits in the pentamer (subunit A interfaces with B and E, Fig. 3a). These contacts are largely hydrophobic, containing only two salt bridges (between residues Asp 128 and Arg 89 from chain A and Lys165 and Asp161 from chain B, respectively) and eleven potential hydrogen bonds. Most of the interactions between chains occur through the α-helices of the (αβ)8-barrels; in the A–B interface, helices 1a, 2, and 3, and the large loop between β3 and α3 from subunit A interact with helices 4, 5, and 6 from subunit B, burying some 1200 Å2 of surface area on each monomer. Since any given monomer participates in two of these interactions, pentameric interactions bury 18% of the solvent accessible surface area.

A second ring is related to the first by 2-fold symmetry axes perpendicular to the 5-fold axis of the pentamer. The stacked rings have a total height of approximately 70 Å, and the central pore runs this full length. Monomers stacked on top of each other (A and F; Fig. 3b) have extensive interactions that are significantly enhanced by a ‘swapping’ of N-terminal residues. In this swap, residues 10–24 extend away from the (αβ)8-barrel formed by their chain and pack into the interface between two adjacent monomers in the other pentamer, burying 460 Å2, or 21% of the accessible surface area of this swapped coil. The rest of the A-F interface is largely composed of contacts involving helix α0 and the loops after helices 2 and 3. In total, nearly 2100 Å2 are buried in this interface, 15% of the total accessible surface area.

One final interaction is due to the interface of the type seen between monomers B and F in Fig. 3b and is largely caused by the swapped 34 N-terminal residues. While this swapped coil packs chiefly against its direct neighbor from the other ring (i.e. A and F, Fig. 3b), it also makes contacts with α6 from the other monomer. In this case, 900 Å2 of surface area is buried, though the value may be even larger if residues 1–9 (disordered in the structure) also contribute to this interface. When all of the interfaces are considered, approximately 40% of the total surface area is buried in oligomer formation, suggesting that the decamer is likely the predominant form of LsrF in vivo. Consistent with this conclusion, only decamers were observed in gel filtration experiments (data not shown).

Structure of the Ligand Binding Site

To identify the catalytic site of LsrF, we determined the structure of the protein in complex with two P-AI-2 analogues: ribose-5-phosphate (R5P) and ribulose-5-phosphate (5RP) (Fig. 1). In both structures, the ligand electron density allowed definitive placement of the phosphate group and illustrated the general path of the carbon chain, but was of insufficient quality for unambiguous placement of all ligand atoms (Fig. 5a, b). As an independent confirmation of placement of the phosphate, the LigandFit module of PHENIX [34] was used as an automated means for placing the ligands. The automated procedure positioned the phosphates in the same location as was modeled manually.

thumbnail

Figure 5. The LsrF ligand binding site and potential catalytic residues.

A. Stereoview of ribulose-5-phosphate bound to LsrF showing 20-fold NCS averaged 2F0-FC electron density. Density was contoured at 4.0 (red) and 2.0 (blue) σ and truncated 2.0 Å from ligand atoms. The position of the phosphate is unambiguous, and the general path of the ligand is clear. B. Stereoview of ribose-5-phosphate bound to LsrF showing 20-fold NCS averaged 2F0-FC electron density. Density was contoured at 5.0 (red) and 2.0 (blue) σ and truncated 2.0 Å from the ligand. The position of the phosphate is unambiguous, and the general path of the ligand is clear. C. Structural alignment of key catalytic residues from rabbit (blue bonds; 1J4E) and T. tenax (red bonds; 1OK4) FBPA with LsrF (white bonds). Ribulose-5-phosphate from LsrF is shown in ball and stick form. Residue numbering follows LsrF.

doi:10.1371/journal.pone.0006820.g005

R5P and 5RP bind LsrF in the same location, near the entrance to the (αβ)8-barrel with the phosphate group oriented towards the coils following β7 and β8 (Fig. 2a & c). The phosphate is located near the positively charged side chain of Arg254 and is positioned to form hydrogen bonds with the side chain of His58, the side chain and main chain of Arg254, and the main chain of three glycine residues: 226, 227, and 253 (in all cases with N or NH groups) (Fig. 5a, b). The ligand then extends across the center of the (αβ)8-barrel, away from strands 7 and 8, in a largely polar environment. In particular, Lys203 is adjacent to the ligand; this residue has potential significance for the mechanism, as equivalently positioned lysines are responsible for Schiff base formation in other aldolases (below). No large conformational changes were observed upon ligand binding, though there were small movements in a few binding site residues, most notably Asp251 and Met252 (with α-carbons shifting by 0.5–2.0 Å). A single water was built in the binding site of unliganded LsrF; this water is displaced upon ligand binding.

Discussion

While AI-2 mediated quorum sensing has been identified in many bacterial species, the benefits bacteria gain from this communication are not fully understood. The presence of genes not involved in AI-2 transport in the lsr operon (lsrF and lsrG) raises questions about the eventual fate of internalized AI-2. Experiments studying regulation of the lsr operon in ΔlsrF mutants of S. typhimurium have implicated LsrF in P-AI-2 processing, though biochemical studies have also raised the possibility that LsrF acts on a product of the reaction involving P-AI-2 and LsrG or another P-AI-2 adduct [20], [21]. The structure of LsrF and complexes with P-AI-2 analogues presented here strongly suggest that LsrF is a class I aldolase.

Fold Comparisons with other Aldolases

NCBI-Blast identifies LsrF as belonging to the TIM phosphate binding superfamily and, in searching for conserved domains, all e-values better than 1e-5 suggest it to be an aldolase (the strongest match, with an e-value of 5e-173, is with the aldolase cluster PRK08227). A DALI search using the LsrF monomer structure presented here identified two very similar structures (Z-scores greater than 25 and RMSD less than 2.0 Å), along with a large number of more distantly related structures that share the ubiquitous TIM barrel fold. The top DALI hits are the M. jannaschii ADH synthase, which catalyzes a transaldol reaction (PDB ID: 2QJG) [31], and the FBPA from Thermoproteus tenax (PDB ID: 1OJX) [30]. These proteins have low sequence identity with LsrF (31% and 25% respectively), but nonetheless share essentially identical folds, with the exception of the domain swapping involving the N-terminus of LsrF.

Domain swapping has been observed previously in the (αβ)8-barrel fold family, initially by Huang et al in phosphoenolpyruvate mutase where C-terminal residues are swapped, giving rise to dimers that further assemble into a tetramer [35]. C-terminal domain swapping has also been observed in the E. coli fructose-6-phosphate aldolase, FSA [36]. Like LsrF, FSA crystallizes as a decamer, but the domain swapping is C-terminal and occurs between subunits in the same pentamer, whereas in LsrF the swapping is N-terminal and occurs between subunits in different pentamers, presumably stabilizing the decameric form of the complex (Fig. 3b). Interestingly, no domain swapping is observed in the decameric structures of T. tenax FBPA or M. jannaschii ADH synthase, indicating that it is not a requirement for formation of a stable aldolase decamer.

Comparison of the LsrF active site with other aldolases

The P-AI-2 analogues ribose-5-phosphate and ribulose-5-phosphate bind to LsrF in the same general position that other aldolases bind phosphorylated substrates (e.g. E. coli DERA and FBPA, T. tenax FBPA and M. jannaschii ADH synthase), suggesting that the canonical aldolase active site is conserved in LsrF. Structural-based sequence alignments with T. tenax FBP aldolase and M. jannaschii ADH synthase, the two most closely related aldolase structures, and E. coli FBP aldolase show that residues in the ligand binding site are more highly conserved than one would expect based on overall sequence identities (Figs. 4 and 5c), supporting the premise that these residues are important for LsrF substrate binding and activity. Notably, most of residues that hydrogen bond with the phosphate of the ligand in LsrF (Arg254 and Gly 226, 227, and 253) are structurally conserved in all four structures, and the remaining residue (His54) is conserved in T. tenax FBPA and M. jannaschii ADH synthase, but not E. coli FBPA, where it is replaced by a Glu. Examination of crystal structures of complexes of these proteins with phosphorylated ligands (1OK4, 2QJG, and 1J4E) shows that the conserved residues are positioned to form hydrogen bonds with the phosphoryl group of the ligand just as they are in LsrF.

The defining catalytic residue for a type I aldolase is a lysine that forms a Schiff base with the substrate. Structural alignments of LsrF with a variety of type I aldolases, including FBP aldolase from rabbit and T. tenax, ADH synthase from M. jannaschii, and transaldolase B, DERA, and 2-keto-3-deoxy-6-phosphogluconate (KDPG) from E. coli show structural conservation of the catalytic lysine with LsrF K203. Other catalytically significant residues vary across different aldolases, but nonetheless potential catalytic residues in LsrF can be identified from structural comparisons with FBP aldolase from rabbit and T. tenax and ADH synthase from M. jannaschii. These aldolases have an aspartate residue that acts as a general base, facilitating the carbon-carbon bond cleavage (or formation) by deprotonating an adjacent hydroxyl. The aspartic acid is then thought to donate the proton back during the reforming of the imine [29], [31], [37]. This asparate is structurally conserved in LsrF (Asp57; Fig. 5c) and is well positioned to participate in catalysis as a general acid/base.

The identity of the catalytic residue that participates in the dehydration of the carbinolamine during formation of the Schiff base differs in the various species. In most aldolases, including rabbit FBP aldolase, the residue is a glutamate adjacent to the catalytic lysine [29]. In T. tenax FBP aldolase, and M. jannaschii ADH synthase the catalytic glutamate is not conserved; instead, a tyrosine is positioned to act as a proton donor [30], [31]. Neither of these residues is structurally conserved in LsrF. Although a tyrosine (205) is adjacent to the position occupied by the catalytic Tyr in the other enzymes, it is too distant from the catalytic lysine (6.8 Å) to reasonably participate in catalysis. Rather, there is an aspartate (251) located only 2.9 Å from the K203, though on the other side of the lysine from the catalytic glutamate in rabbit FBP aldolase (Fig. 5c). This location, occupied by a serine in rabbit FBP aldoase and alanine in the other close homologues, makes Asp251 a very plausible replacement for the catalytic glutamate/tyrosine in other aldolases.

Conclusion

The structures presented here strongly support the classification of LsrF as a class I aldolase, due to overall structural homology, the conservation of key catalytic residues, and conservation of the ligand binding site. Thus far, we have been unable to detect the products of the LsrF reaction in vitro, either by NMR or TLC using radiolabled substrate, in the presence or absence of the other P-AI-2 processing enzyme LsrG (results not shown). While previous work has implicated P-AI-2 [21] or an adduct of P-AI-2 [20] as the likely substrate for LsrF, it is possible that additional enzymatic processing of P-AI-2 or an additional co-factor is necessary for activity, and we are conducting genetic and biochemical experiments to address these possibilities.

If, as working model, we consider LsrF to act directly on P-AI-2 via an FBPA-like mechanism, we would expect the highly conserved catalytic K203 to form a Schiff base through nucleophilic attack on the carbonyl carbon one position away from the phosphate of the substrate (C4 of P-AI-2), leading to the breaking of the C2-C3 bond and the formation of acetate and dihydroxyacetone phosphate (DHAP). (It should be noted that hydration and keto-aldol isomerization would be necessary to make P-AI-2 an appropriate substrate for this reaction.) Intriguingly, prior work has shown that DHAP represses lsr transcription in an LsrR-dependant manner [19]. Thus, LsrF could function to reduce lsr transcription not only by reducing the amount of P-AI-2 present in the cell as previously suggested [21], but also by catalyzing the formation of an inhibitor of lsr transcription.

Further biochemical characterization of the LsrF reaction will be necessary to fully understand the role LsrF plays in AI-2 mediated quorum sensing, and the structures presented here provide details that will be of utility in the design of these experiments.

Materials and Methods

Overexpression and purification of LsrF

E. coli LsrF was cloned into plasmids pGEX-4T1 and pDEST-HisMBP for overexpression as glutathione-S-transferase and dual His6-maltose-binding-protein fusions, respectively. Plasmids were transformed into E. coli strain BL21, and cultures were grown in Luria broth (Sigma-Aldrich) at 37°C to an OD595 of 0.3. The temperature was then changed to 22°C, and, when the culture reached an OD595 of 0.9, protein expression was induced by the addition of 0.1 mM isopropyl β-D-thiogalactopyranoside. After induction, the bacteria were grown for 15 hours at 22°C before harvesting by centrifugation.

Cells producing the GST-LsrF fusion were resuspended in 25 mM Tris, pH 8.0, 150 mM sodium chloride, 5 mM DTT, 2.5 µg mL−1 DNase, and protease inhibitors (2.5 µg mL−1 aprotinin, 2.5 µg mL−1 leupeptin, 1 mM Pefablock (Roche)), while cells producing the His6-MBP-LsrF fusion were resuspended in 25 mM HEPES, pH 8.0, 200 mM sodium chloride, 25 mM imidazole, 1 mM β-mercaptoethanol, 2.5 µg mL−1 DNase, and protease inhibitors (2.5 µg mL−1 aprotinin, 2.5 µg mL−1 leupeptin, 1 mM Pefablock). In both cases, the cells were lysed using a M-110Y Microfluidizer (Microfluidics) and the lysates clarified by centrifugation.

The GST-LsrF fusion was purified by affinity chromatography using glutathione agarose (Sigma-Aldrich). The fusion protein was digested with thrombin for 12 hours at 4°C while still bound to the glutathione agarose. LsrF was eluted from the agarose column in 25 mM Tris, pH 8.0, 150 mM sodium chloride, and 1 mM DTT. The resulting protein solution was diluted with 25 mM Tris, pH 8.0, 1 mM DTT, to a NaCl concentration of 75 mM. LsrF was then further purified by ion exchange chromatography using a SourceQ column (GE Healthcare) with a gradient from 0 to 1 M NaCl. As a final purification step, the protein was subjected to size exclusion chromatography on a Superdex 200 column (GE Healthcare), eluting in 25 mM Tris pH 8.0, 1 mM DTT, and 150 mM NaCl. The protein was concentrated to 9.6 mg ml−1 for crystallization.

The His6-MBP-LsrF fusion was also purified by affinity chromatography, but in this case using NiNTA agarose (QIAGEN). The fusion protein was eluted from the column using a gradient from the resuspension conditions to 25 mM HEPES pH 8.0, 200 mM sodium chloride, 250 mM imidazole as described in Tropea et al [38]. Protein containing fractions were pooled, and the concentration of imidazole was reduced to 25 mM by diluting with 25 mM HEPES, pH 8.0, 200 mM NaCl. The His6-MBP tag was then digested from the LsrF using His6-TEV protease [38]. The tag and protease were removed by passing the solution over NiNTA resin, and the resulting LsrF solution was diluted to 50 mM NaCl with a 25 mM HEPES, pH 8.0. The LsrF was purified by ion exchange and size exclusion chromatography as described above, and the resulting LsrF was concentrated to 8.2 mg ml−1.

Crystallization and Structure Determination

Crystals of LsrF were grown via the hanging drop method with a well solution of 22% PEG 400, 200 mM MgCl2, 100 mM Tris pH 8.0. Unliganded crystals were grown from the pGEX-4T1 derived protein while protein for the ligand-soaked crystals came from the pDEST-MBP construct.

Unliganded crystals were soaked in 100 mM Tris pH 8.0, 25 mM MgCl2, 27.5% PEG 400 for one minute and flash frozen in the diffractometer's cryostream. Data were collected at 100K using an R-AXIS-IV image plate detector mounted on a Rigaku 200HB generator. The crystals (P1, a = 78.50 Å, b = 104.61 Å, c = 171.67 Å, α = 89.88°, β = 79.31°, γ = 89.61°) diffracted to 2.9 Å resolution. Ligand was introduced to LsrF crystals by soaking the crystals in 100 mM Tris pH 8.0, 100 mM MgCl2, 27.5% PEG 400, 100 mM ligand (either ribulose-5-phosphate or ribose-5-phosphate, Sigma-Aldrich) for five minutes. Crystals were flash frozen in liquid nitrogen and data were collected at 100K at NSLS beamline X26C. The ribose-5-phosphate crystal (P1, a = 78.35 Å, b = 105.45 Å, c = 173.42, α = 89.51°, β = 79.79°, γ = 90.34°) diffracted to 2.5 Å resolution while the ribulose-5-phosphate crystal (P1, a = 78.741 Å, b = 107.10 Å, c = 169.52, α = 90.00°, β = 102.62°, γ = 90.00°) diffracted to 2.9 Å resolution. Data were processed using Denzo, Scalepack [39], and CCP4 [40]. It should be noted that while the unit cell of the ribulose-5-phosphate crystals is, in appearance, potentially monoclinic, the data does not scale well as monoclinic at higher resolutions. Moreover, the apparent large variation in the β angle for the ribulose-5-phosphate crystal is due to an alternative convention selected by Denzo rather than a significantly different cell.

The structure of unliganded LsrF was determined via molecular replacement with PHENIX [34], using ADH synthase from M. jannaschii (PDB ID: 2QJG, 31% sequence identity) as the search model. A 20-fold NCS averaged map was calculated and the model built using Coot [41]. Because of the high degree of NCS, reflections were selected for the R-free set in thin resolution shells using DATAMAN [42]. The structure was refined to 2.9 Å using PHENIX and REFMAC [43], using NCS constraints. The model contains 2 copies of the LsrF decamer, though weak density made it impossible to model the N-terminal 9 residues, the C-terminal 2 residues, and residues 177–180, an apparent surface loop. The model exhibits good geometry (Table 1), with only eleven of 5440 residues outside the allowed region of the Ramachandran plot (calculated by Coot). The final model also includes 241 water molecules, and has a final Rcryst of 0.209 and Rfree of 0.229.

thumbnail

Table 1. Crystallographic data and refinement statistics.

doi:10.1371/journal.pone.0006820.t001

The liganded structures were determined by molecular replacement via PHENIX, though in these cases the unliganded LsrF structure was used as the molecular replacement model and reflections for the Rfree set were selected randomly rather than in resolution shells. Refinement parameters for the ligands were calculated using the eLBOW module of PHENIX. The ribose-5-phosphate structure was refined via PHENIX and REFMAC, using NCS constraints, to 2.5 Å resolution, with Rcryst = 0.205 and Rfree = 0.235. The size of the unit cell made it difficult to collect a complete data set at high resolution, and only 39% of the possible reflections were measured in the highest resolution shell. However, the lack of completeness is offset by the high degree of NCS (20-fold), making it reasonable to include data to this resolution. The final model included one ribose-5-phosphate per chain and 334 water molecules. The ribulose-5-phosphate structure was refined to 2.9 Å resolution via PHENIX and REFMAC, with NCS constraints, and the final model (Rcryst = 0.195, Rfree = 0.228) includes one ribulose-5-phosphate per chain and 376 water molecules. Both models are missing the same residues as the unliganded model (1–9, 177–180, and 290–291) and have good geometry (Table 1), with either one (LsrF/ribulose-5-phosphate) or zero (LsrF/ribose-5-phosphate) of 5440 residues outside allowed regions of the Ramachandran plot. The position of the electron-rich phosphate is clear for both ligands, but the density of the carbon backbone was relatively poor, revealing the general path of the ligand but not specific details and leading to high B-factors.

Coordinates and structure factors for unliganded LsrF were deposited in the PDB with accession number 3GKF. Coordinates and structure factors for liganded LsrF were deposited in the PDB with accession numbers 3GLC (ribose-5-phosphate) and 3GND (ribulose-5-phosphate).

The secondary structure elements were determined using DSSP [44] and analysis of subunit interfaces used PISA [45]. All molecular images were generated using PyMOL [46]. Structural alignments were calculated with MAMMOTH-mult [47] and the alignment figure was produced with ESPript [48].

Acknowledgments

We gratefully acknowledge the staff of the National Synchrotron Light Source X26C beamline for assistance with X-ray data collection. Data was also collected at the Princeton University X-ray Facility with the gracious assistance of Phil Jeffrey, who also provided valuable assistance in data collection at X26C.

Author Contributions

Conceived and designed the experiments: KBX STM. Performed the experiments: ZD KBX STM. Analyzed the data: ZD KBX STM. Wrote the paper: KBX STM.

References

  1. 1. Federle MJ, Bassler BL (2003) Interspecies communication in bacteria. J Clin Invest 112: 1291–1299.
  2. 2. Schauder S, Shokat K, Surette MG, Bassler BL (2001) The LuxS family of bacterial autoinducers: biosynthesis of a novel quorum-sensing signal molecule. Mol Microbiol 41: 463–476.
  3. 3. Mok KC, Wingreen NS, Bassler BL (2003) Vibrio harveyi quorum sensing: a coincidence detector for two autoinducers controls gene expression. Embo J 22: 870–881.
  4. 4. Rader BA, Campagna SR, Semmelhack MF, Bassler BL, Guillemin K (2007) The quorum-sensing molecule autoinducer 2 regulates motility and flagellar morphogenesis in Helicobacter pylori. J Bacteriol 189: 6109–6117.
  5. 5. Huang Z, Meric G, Liu Z, Ma R, Tang Z, et al. (2008) luxS-Based Quorum-Sensing Signaling Affects Biofilm Formation in Streptococcus mutans. J Mol Microbiol Biotechnol.
  6. 6. Sztajer H, Lemme A, Vilchez R, Schulz S, Geffers R, et al. (2008) Autoinducer-2-regulated genes in Streptococcus mutans UA159 and global metabolic effect of the luxS mutation. J Bacteriol 190: 401–415.
  7. 7. Hammer BK, Bassler BL (2003) Quorum sensing controls biofilm formation in Vibrio cholerae. Mol Microbiol 50: 101–104.
  8. 8. Hammer BK, Bassler BL (2007) Regulatory small RNAs circumvent the conventional quorum sensing pathway in pandemic Vibrio cholerae. Proc Natl Acad Sci U S A 104: 11145–11149.
  9. 9. Miller MB, Skorupski K, Lenz DH, Taylor RK, Bassler BL (2002) Parallel quorum sensing systems converge to regulate virulence in Vibrio cholerae. Cell 110: 303–314.
  10. 10. Li M, Villaruz AE, Vadyvaloo V, Sturdevant DE, Otto M (2008) AI-2-dependent gene regulation in Staphylococcus epidermidis. BMC Microbiol 8: 4.
  11. 11. Lombardia E, Rovetto AJ, Arabolaza AL, Grau RR (2006) A LuxS-dependent cell-to-cell language regulates social behavior and development in Bacillus subtilis. J Bacteriol 188: 4442–4452.
  12. 12. Laasik E, Andresen L, Mae A (2006) Type II quorum sensing regulates virulence in Erwinia carotovora ssp. carotovora. FEMS Microbiol Lett 258: 227–234.
  13. 13. Pereira CS, McAuley JR, Taga ME, Xavier KB, Miller ST (2008) Sinorhizobium meliloti, a bacterium lacking the autoinducer-2 (AI-2) synthase, responds to AI-2 supplied by other bacteria. Mol Microbiol 70: 1223–1235.
  14. 14. Xavier KB, Bassler BL (2005) Interference with AI-2-mediated bacterial cell-cell communication. Nature 437: 750–753.
  15. 15. Chen X, Schauder S, Potier N, Van Dorsselaer A, Pelczer I, et al. (2002) Structural identification of a bacterial quorum-sensing signal containing boron. Nature 415: 545–549.
  16. 16. Miller ST, Xavier KB, Campagna SR, Taga ME, Semmelhack MF, et al. (2004) Salmonella typhimurium recognizes a chemically distinct form of the bacterial quorum-sensing signal AI-2. Mol Cell 15: 677–687.
  17. 17. Hardie KR, Heurlier K (2008) Establishing bacterial communities by ‘word of mouth’: LuxS and autoinducer 2 in biofilm development. Nat Rev Microbiol 6: 635–643.
  18. 18. Xavier KB, Bassler BL (2003) LuxS quorum sensing: more than just a numbers game. Curr Opin Microbiol 6: 191–197.
  19. 19. Xavier KB, Bassler BL (2005) Regulation of uptake and processing of the quorum-sensing autoinducer AI-2 in Escherichia coli. J Bacteriol 187: 238–248.
  20. 20. Xavier KB, Miller ST, Lu W, Kim JH, Rabinowitz J, et al. (2007) Phosphorylation and processing of the quorum-sensing molecule autoinducer-2 in enteric bacteria. ACS Chem Biol 2: 128–136.
  21. 21. Taga ME, Miller ST, Bassler BL (2003) Lsr-mediated transport and processing of AI-2 in Salmonella typhimurium. Mol Microbiol 50: 1411–1427.
  22. 22. Taga ME, Semmelhack JL, Bassler BL (2001) The LuxS-dependent autoinducer AI-2 controls the expression of an ABC transporter that functions in AI-2 uptake in Salmonella typhimurium. Mol Microbiol 42: 777–793.
  23. 23. Lenz DH, Miller MB, Zhu J, Kulkarni RV, Bassler BL (2005) CsrA and three redundant small RNAs regulate quorum sensing in Vibrio cholerae. Mol Microbiol 58: 1186–1202.
  24. 24. Lenz DH, Mok KC, Lilley BN, Kulkarni RV, Wingreen NS, et al. (2004) The small RNA chaperone Hfq and multiple small RNAs control quorum sensing in Vibrio harveyi and Vibrio cholerae. Cell 118: 69–82.
  25. 25. Waters CM, Bassler BL (2006) The Vibrio harveyi quorum-sensing system uses shared regulatory components to discriminate between multiple autoinducers. Genes Dev 20: 2754–2767.
  26. 26. Neiditch MB, Federle MJ, Miller ST, Bassler BL, Hughson FM (2005) Regulation of LuxPQ receptor activity by the quorum-sensing signal autoinducer-2. Mol Cell 18: 507–518.
  27. 27. Neiditch MB, Federle MJ, Pompeani AJ, Kelly RC, Swem DL, et al. (2006) Ligand-induced asymmetry in histidine sensor kinase complex regulates quorum sensing. Cell 126: 1095–1108.
  28. 28. Gefflaut T, Blonski C, Perie J, Willson M (1995) Class I aldolases: substrate specificity, mechanism, inhibitors and structural aspects. Prog Biophys Mol Biol 63: 301–340.
  29. 29. Choi KH, Shi J, Hopkins CE, Tolan DR, Allen KN (2001) Snapshots of catalysis: the structure of fructose-1,6-(bis)phosphate aldolase covalently bound to the substrate dihydroxyacetone phosphate. Biochemistry 40: 13868–13875.
  30. 30. Lorentzen E, Pohl E, Zwart P, Stark A, Russell RB, et al. (2003) Crystal structure of an archaeal class I aldolase and the evolution of (betaalpha)8 barrel proteins. J Biol Chem 278: 47253–47260.
  31. 31. Morar M, White RH, Ealick SE (2007) Structure of 2-amino-3,7-dideoxy-D-threo-hept-6-uloso​nicacid synthase, a catalyst in the archaeal pathway for the biosynthesis of aromatic amino acids. Biochemistry 46: 10562–10571.
  32. 32. Heine A, DeSantis G, Luz JG, Mitchell M, Wong CH, et al. (2001) Observation of covalent intermediates in an enzyme mechanism at atomic resolution. Science 294: 369–374.
  33. 33. Murzin AG, Brenner SE, Hubbard T, Chothia C (1995) SCOP: a structural classification of proteins database for the investigation of sequences and structures. J Mol Biol 247: 536–540.
  34. 34. Adams PD, Grosse-Kunstleve RW, Hung LW, Ioerger TR, McCoy AJ, et al. (2002) PHENIX: building new software for automated crystallographic structure determination. Acta Crystallogr D Biol Crystallogr 58: 1948–1954.
  35. 35. Huang K, Li Z, Jia Y, Dunaway-Mariano D, Herzberg O (1999) Helix swapping between two alpha/beta barrels: crystal structure of phosphoenolpyruvate mutase with bound Mg(2+)-oxalate. Structure 7: 539–548.
  36. 36. Thorell S, Schurmann M, Sprenger GA, Schneider G (2002) Crystal structure of decameric fructose-6-phosphate aldolase from Escherichia coli reveals inter-subunit helix swapping as a structural basis for assembly differences in the transaldolase family. J Mol Biol 319: 161–171.
  37. 37. Lorentzen E, Siebers B, Hensel R, Pohl E (2005) Mechanism of the Schiff base forming fructose-1,6-bisphosphate aldolase: structural analysis of reaction intermediates. Biochemistry 44: 4222–4229.
  38. 38. Tropea JE, Cherry S, Nallamsetty S, Bignon C, Waugh DS (2007) A generic method for the production of recombinant proteins in Escherichia coli using a dual hexahistidine-maltose-binding protein affinity tag. Methods Mol Biol 363: 1–19.
  39. 39. Otwinowski Z, Minor W (1997) Processing of X-ray Diffraction Data Collected in Oscillation Mode. Methods in Enzymology 276: 307–326.
  40. 40. (1994) The CCP4 suite: programs for protein crystallography. Acta Crystallogr D Biol Crystallogr 50: 760–763.
  41. 41. Emsley P, Cowtan K (2004) Coot: model-building tools for molecular graphics. Acta Crystallogr D Biol Crystallogr 60: 2126–2132.
  42. 42. Kleywegt GJ, Jones TA (1996) xdlMAPMAN and xdlDATAMAN - programs for reformatting, analysis and manipulation of biomacromolecular electron-density maps and reflection data sets. Acta Crystallogr D Biol Crystallogr 52: 826–828.
  43. 43. Steiner RA, Lebedev AA, Murshudov GN (2003) Fisher's information in maximum-likelihood macromolecular crystallographic refinement. Acta Crystallogr D Biol Crystallogr 59: 2114–2124.
  44. 44. Kabsch W, Sander C (1983) Dictionary of protein secondary structure: pattern recognition of hydrogen-bonded and geometrical features. Biopolymers 22: 2577–2637.
  45. 45. Krissinel E, Henrick K (2007) Inference of macromolecular assemblies from crystalline state. J Mol Biol 372: 774–797.
  46. 46. DeLano WL (2002) The PyMOL Molecular Graphics System.
  47. 47. Lupyan D, Leo-Macias A, Ortiz AR (2005) A new progressive-iterative algorithm for multiple structure alignment. Bioinformatics 21: 3255–3263.
  48. 48. Gouet P, Courcelle E, Stuart DI, Metoz F (1999) ESPript: analysis of multiple sequence alignments in PostScript. Bioinformatics 15: 305–308.