Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Fundamental Limits on Wavelength, Efficiency and Yield of the Charge Separation Triad

Correction

9 Aug 2012: Punnoose A, McConnell LA, Liu W, Mutter AC, Koder RL (2012) Correction: Fundamental Limits on Wavelength, Efficiency and Yield of the Charge Separation Triad. PLOS ONE 7(8): 10.1371/annotation/7db1b9ef-c93c-4b02-b721-a8473d2bb4e2. https://doi.org/10.1371/annotation/7db1b9ef-c93c-4b02-b721-a8473d2bb4e2 View correction

Abstract

In an attempt to optimize a high yield, high efficiency artificial photosynthetic protein we have discovered unique energy and spatial architecture limits which apply to all light-activated photosynthetic systems. We have generated an analytical solution for the time behavior of the core three cofactor charge separation element in photosynthesis, the photosynthetic cofactor triad, and explored the functional consequences of its makeup including its architecture, the reduction potentials of its components, and the absorption energy of the light absorbing primary-donor cofactor. Our primary findings are two: First, that a high efficiency, high yield triad will have an absorption frequency more than twice the reorganization energy of the first electron transfer, and second, that the relative distance of the acceptor and the donor from the primary-donor plays an important role in determining the yields, with the highest efficiency, highest yield architecture having the light absorbing cofactor closest to the acceptor. Surprisingly, despite the increased complexity found in natural solar energy conversion proteins, we find that the construction of this central triad in natural systems matches these predictions. Our analysis thus not only suggests explanations for some aspects of the makeup of natural photosynthetic systems, it also provides specific design criteria necessary to create high efficiency, high yield artificial protein-based triads.

Introduction

Solar energy conversion machines found in nature utilize a number of small molecules, called cofactors, which serve as discrete sites for the binding of a single electron [1]. Charge separation in these proteins is effected via a cascade of several individual electron transfer (ET) events initiated by the absorption of a photon at a central cofactor termed the primary-donor [2]. These protein machines typically contain numerous cofactors arranged so as to enable the movement of the electron and the oxidizing equivalent away from the primary-donor in opposite directions [3], [4]. The resultant potential energy is then coupled to some chemical reaction or reactions which create a storable, diffusable form of chemical energy.

Chemists have made an intensive effort over the past forty years to recreate the charge separation capability of these devices in synthetic systems [5][11]. The minimal construct that can achieve long-lived charge separation contains a primary-donor along with two other cofactors to facilitate the separation and prevent the fast relaxation of the electron back to the groundstate of the primary-donor (see Figure 1A). This has been termed the photosynthetic cofactor triad (PCT) [7], [11][13]. Research efforts have aimed at engineering protein-based PCTs, either through the reengineering of natural proteins [14], [15] or de novo design of new artificial proteins [16], [17]. An optimal PCT construct will maximize the yield of the charge separated state and minimize energy loss while maintaining the state for as long as necessary before decaying to the groundstate. These performance metrics are intimately related to the microscopic ET rates which themselves are a function of the reduction potentials and the spatial arrangement of the three cofactors. Given the large expense and long time scale of these design efforts [2], [18][20], it is important to understand the optimal structure and properties of this molecule from the beginning of the design process. The key is to identify the set of microscopic parameters which when manipulated can effect maximum benefit during the design process.

thumbnail
Figure 1. Structure and function of the photosynthetic triad.

(A) Molecular detail of an idealized artificial charge separation construct, a self-assembling de novo designed protein. (B) Discrete steps in the formation of the charge separated state: The primary-donor molecule P in the ground state configuration DPA absorbs a photon of the correct frequency to form DA, where is the photoexcited state of P. The excited electron transfers to the acceptor cofactor, A, forming the intermediate state DP+A. The donor cofactor, D, then transfers an electron into P, resulting in the charge separated state D+PA. (C) Energy level diagram of the states in B. The k-variables denote the corresponding microscopic single-electron ET rates. In this scheme, the direct long range tunneling between D and A (i.e., ) and the ‘thermal back reaction’ [33] between P and A (i.e., ) are not considered. As explained in the main text, their magnitudes can be significantly suppressed without affecting the efficiency and yield.

https://doi.org/10.1371/journal.pone.0036065.g001

Clearly, numerical simulations of the rate equations to map out the optimal set of ET rates for the entire construct involve a large parameter space [21]. For this reason there has been little theoretical analysis of the optimal structure and properties of the cofactor triad and its many sequential ETs. There are several semiclassical equations which predict ET rates that are well validated, in particular the semiclassical Marcus expression [22][26]. These are all complicated functions with a number of terms. The challenge in a complex system such as the PCT is to select the formalism which will give a meaningful analytical expression for its behavior. For example, Cho and Silby, in 1995, derived the time-dependent behavior of a molecular dyad structure composed of two cofactors and three states in the limit of a very large reduction potential difference between the excited state primary donor and the acceptor site [27].

In this work, we solve the rate equations analytically for a generic molecular triad with four states and obtain closed-form expressions relating the lifetime and yield of the charge separated state to the ET rates. The equations allow us to isolate the relevant ratios of rate constants that control the yield and the lifetime. These conditions are used to set bounds on the physical distances and potentials that makeup the PCT using a standard semiclassical model which incorporates Marcus theory for the dependence and an exponential drop-off of the ET rate with distance [28] as parameterized in the Moser-Dutton ruler [29], [30]. We report two major findings: first, that the highest yield occurs when the primary-donor cofactor is closest to the acceptor cofactor and second, that the highest yield and efficiency occurs when the absorption frequency of the primary-donor is more than twice the reorganization energy of the first electron transfer. Interestingly, we demonstrate that natural systems seem to obey these rules despite their much higher degree of complexity.

Methods

The basic PCT arrangement for long lived charge separation is depicted schematically in Figure 1A [7], and the microscopic steps leading to charge separation are shown explicitly in Figure 1B and energetically in Figure 1C: upon photoexcitation of the site of charge separation or primary-donor (P) to , the excited electron transfers to an acceptor molecule (A). A donor molecule (D) then transfers an electron to P, thus blocking the unproductive charge recombination via back electron transfer, to create a fully charge separated state, D+PA.

The state C principally relaxes back to the ground state, DPA, by one of two mechanisms: direct long ET between A and D+, or a two step recombination process via the intermediate state, DP+A, followed by electron transfer from A to P+, i.e, from state G. When the molecules are arranged linearly, as in Figure 1A, the first short-circuit reaction mechanism is considerably suppressed, and is therefore neglected in our model. The ET rates for the two step process are and , respectively. The reverse transition back to the excited state from A is also suppressed; below we demonstrate that the corresponding ET rate is exponentially suppressed for energy differences larger than 60–100 meV between A and P+A, which we show is much less than 10% of the output energy and therefore does not affect our general conclusions. Similarly, since the energy difference for the ET from P to A is in the eV range, thermal excitation from the groundstate to the acceptor is not considered at room temperatures.

The master equations describing the transitions between the states corresponding to the scheme in Figure 1C are:(1a)(1b)(1c)(1d)

The transition rates between different configurations is governed by the microscopic ET rates. The specific ET involved is encoded in the subscript, for example, , denotes the ET rate for the transition. The complete list of transitions are: and . As explained earlier, the short-circuit and the reverse transitions are suppressed in our scheme. The rate is the combined direct relaxation rate, fluorescent and otherwise, from the photoexcited state to its groundstate P.

Setting either of the two rates or to zero in Equation 1 prevents the state C (the charge separated state) from decaying into the ground state G creating a steadystate at long times. A finite and/or will, on the other hand, force C to decay in a finite time, which we call the lifetime of the charge separated state. To study this decay and determine the population (yield) of state C, it is convenient to solve for the evolution of analytically. The solution is presented in the next section.

Results

Analytical solution of the PCT

Our goal in this section is two-fold: to obtain the conditions under which a charge separated state can be maintained in a quasi-steadystate (QSS) for a desired length of time, determined, for example, by the optimal throughput rate, and to derive simple explicit formulas for the lifetime of the QSS and the maximum yield of C. To this end, we first analytically solve Equation 1 for . For the initial conditions, we note that the equations being homogeneous, the solutions scale with the initial population , which is determined by the efficiency of the photoexcitation process. Hence, given a non-zero “source” at , we assume that , i.e., they are initially unpopulated.

We first note that Equation 1a can be integrated to give . Substituting into Equation 1c for C and after taking a second time derivative to eliminate I, we arrive at the following second order equation for :(2)where

(3)The source term on the right.(4)

The boundary condition is obtained by setting in Equation 1c. Since the coefficients appearing in Equation 2 are real, it can be written as:(5)where the macroscopic rate constants(6)are the roots of the algebraic equation: (Negative roots are used to keep the rates positive.) Using the following identity, where k is a constant,

(7)we rewrite Equation 5 as(8)

Equation 8 is now easily integrated to obtain the solution for . Separating the constant source term as , the time-dependent part equals(9)This completes our derivation of .

A typical time evolution of is depicted in Figure 2. This graph exhibits several aspects characteristic of charge separation in a PCT [12]: an exponential buildup of state C with a rate constant , followed by a QSS plateau region that decays exponentially at the rate . The length of time for which the QSS persists is termed the charge separation lifetime (), and the population of C at the plateau stage is termed the yield of charge separation (). The rate is the rate at which the state I is initially populated by (see Equation 1b); I then subsequently populates C at the rate . Physically, any system designed to spatially separate charges has to be able to transfer an electron from the photoexcited primary-donor to the acceptor A (which is controlled by the rate ) before it decays back to the ground state at the rate . We thus restrict our analysis to(10)

thumbnail
Figure 2. The evolution of the charge separated state derived in eqn:ct.

is normalized by , which we take to be unity. Rate constants are chosen as , and s. Relevant timescales are labeled on the upper axis and are marked by vertical lines (see eqn:kpm for definitions of ). A central quasi-steadystate (QSS) plateau region is formed when these timescales are well separated. We define the decay time of the QSS, , as the lifetime of the charge separated state. The horizontal line marks the yield, , defined as the value of C in QSS. Analytical expressions for and are derived in Equations 14 and 17, respectively.

https://doi.org/10.1371/journal.pone.0036065.g002

[We use the strong inequality () to emphasize at least an order-of-magnitude smallness.]

The determinants of QSS lifetime and yield

In the previous section, we observed that a QSS is reached at intermediate times provided(11)

When is significantly different from and , the lifetime of the QSS, and thus that of the charge separated state, can be defined as . Our key observation is that in Equation 6 can be made as small as we require by arranging either or both and to be sufficiently small. More precisely, we find that the constraints on the macroscopic rate constants in Equation 11 are satisfied if the microscopic rates obey:(12)

We recognize that is a downhill transfer that can be fast or slow depending on the driving force of the ET determined by where it lies in the Marcus curve. , on the other hand, involves an energetically uphill electron transfer which is always slower than its corresponding downhill transfer (i.e., ). We therefore only demand a strong constraint for compared to that for in Equation 12.

To prove that the conditions in Equation 12 are sufficient to establish a QSS, we first show that independent of the magnitude of the term under the square-root in eqn:kpm, besides being positive, satisfies the stronger constraint(13)

We show this by expanding the square-root in eqn:kpm and analyzing the behavior of for small and large . For small , we see that and , while for large , they reduce to and . It is immediately clear that assuming is sufficient to satisfy Equation 13 for all values of . Note that, since for large , the second condition in Equation 11, namely , is automatically satisfied if we restrict . Hence, the conditions on the macroscopic rate constants in Equation 11 for a QSS to exist are met when the microscopic rate constants obey the constraints in Equation 12.

The importance of the observation that Equation 13 is satisfied for all values of is that it allows us to expand the square-root in Equation 6 to derive simple closed-form expressions for and . They can be analyzed to identify the key optimization parameters controlling the lifetime and yield of the charge separated state. Thus an almost exact expression for the lifetime is obtained after expanding the square-root for the leading non-zero value of (14)

Similarly, to find the yield , we first note in Equation 9 that the QSS behavior of for times and is well approximated by the surviving third term denoted below as .(15)(16)

To obtain the above expressions we used Equation 11 to justify keeping only the leading order terms in the expansion of the square-root in Equation 6, namely, and . denotes the fraction of the initial population of the photoexcited state that remains after direct transition to the grounstate (predominantly fluorescence). Since is the maximum value that attains, namely, its value at the plateau (see Figure 2), before decaying to the groundstate, we define the yield, , as:(17)

The expressions for and derived in Equations 14 and 17 are the main results of this section. They are compared in Figure 2 with the exact solution for (Equation 9); the agreement is excellent. When combined with the conditions in Equation 12 for a QSS to exist, they provide all the necessary information for the design of highly optimized PCTs.

Maximizing the QSS yield and lifetime: microscopic constraints

The advantage of having formulas Equations 14 and 17 for and is that they enable us to identify the primary control parameters that have the largest affect on the performance of the PCT. From Equations 10–17 we conclude that the relevant ratios of the five microscopic ET rates are(18)

They control the formation, yield and lifetime of the charge separated state. To make the dependence explicit, we rewrite Equations 14 and 17 as functions of the dimensionless ratios here:(19a)(19b)where and are the normalized lifetime and yield, respectively. [Note that all the individual rate constants can be expressed in terms of an appropriate combination of the dimensionless ratios and .]

In terms of these ratios, the conditions for the formation of a QSS in Equation 12 translates to(20)

Although no fundamental restrictions on and exist, it follows from Equation 19b that the yield is substantially suppressed when they are . Hence, to maximize the yield, we demand(21)

The condition justifies the arguments leading to Equation 10 and therefore no new condition is obtained. Note that since , a also implies long life-times. We wish to emphasize that while restricting and to is necessary for a QSS to form, the conditions on and ensure a high QSS concentration or yield and a long lifetime.

This completes our analysis of the fundamental constraints on the microscopic rate constants derived to maximize the yield and the lifetime of charge separated states in the QSS regime. It is model-free in the sense that we have not utilized any particular equation to calculate the ET rates and we have not determined any specifics in terms of spatial constraints or electron affinities. We have only derived the limits of optimal values for the rate constants themselves. We now discuss in detail the physical constraints that Equations 20 and 21 impose on the energetics and architecture of the cofactor triads.

Engineering guidelines for optimal PCTs

The physical characteristics of a PCT involve the differences in reduction potentials and distances between the cofactors. Such a construct consistent with the scheme in Figure 1C is shown in Figure 3 where the energies and the distances are marked explicitly. Two more relevant metrics, geometric (overall size) and energetic (efficiency), are introduced below.

thumbnail
Figure 3. The physical characteristics of a PCT corresponding to the scheme in Figure 1C shown with the distances and reduction potentials marked explicitly.

The edge-to-edge separations of the D-P pair and the P-A pair are labeled as and , respectively. The vertical axis is in the direction of increasing energy. The respective reduction potentials are defined in terms of the half-cell potentials, and (final minus the initial state). The driving force, , for an uphill electron transfer, say, D+P DP+, is defined as . The corresponding driving force for the downhill transfer . Given the driving forces and the distances, the rate constants are derived using the Moser-Dutton ruler. Note that the rate , which we take to be the combined relaxation rate, fluorescent and otherwise, of the photoexcited state to its groundstate P, does not follow the Moser-Dutton ruler and must therefore be given. An incoming photon with the correct frequency is absorbed by P to create the photoexcited state . We assume that the ET rates involving can be expressed in terms of the reduction potential of the state P, i.e., , where and . Hence the input energy . The output energy is the stored energy in the charge separated state.

https://doi.org/10.1371/journal.pone.0036065.g003

Separation distance.

We believe that a linear construct is better because it maximizes the distance between the acceptor and donor, thus preventing relaxation by short circuiting direct electron transfer between these sites. We note, however, that this ideal is not found in all natural systems. The maximum distance of charge separation is thus:(22)where and are the edge-to-edge separations of the P-A pair and D-P pair, respectively. Since the ET rates are determined primarily by the edge-to-edge distance [29], the width of P does not play a part in any of the microscopic rate constants delineated in our scheme in Figs. 1B and 3. We do not therefore include the actual width of the primary-donor site P, which even further helps to eliminate the short circuiting AD electron transfer. Instead, we introduce a second distance parameter:(23)that can be varied, keeping fixed, to optimize the output.

Charge-separation efficiency.

An optimal light-activated charge separation construct should also maximize the available useful energy stored in the charge separated state D+PA (see Figure 3). The energy stored in C can be expressed in terms of the driving force as (see Figure 3). Defining the charge separation efficiency, , as the ratio of the stored energy to the input photon energy, , we get:(24)

Thus, consideration of the reduction potentials of each cofactor in the PCT adds a third performance metric , to and , to optimize.

The Moser-Dutton ruler.

In Equations 20 and 21 we identified and derived constraints on the ratios of the ET rate constants for optimal charge transfer in a PCT construct. These rates are determined by the individual values of the reduction potentials and the spatial separations of the cofactors. For this we need explicit equations that relate the rate constants to these variables. To this end, we use the Moser-Dutton ruler, a set of empirical equations that is widely used to simply and accurately predict ET rates in proteins [19], [29], [31]. The ruler predicts a rate constant, , for a downhill electron transfer at room temperature, i.e., when the driving force as(25) here is the reorganization energy in eV and the term in which it appears is the Marcus term which depicts the hyperbolic dependence of the ET rate on the driving force for electron transfer [23]. Reverse or uphill electron transfer is modified by a Boltzmann term to give:

(26)The transfer rates are predicted in units of . The energies are measured in eV, and is the edge-to-edge distance between the cofactors in Å. All logs are to base 10. We note that the use of the Moser-Dutton ruler restricts our analysis from here on only to protein-based PCTs. Other PCTs can be analyzed in a similar way provided the appropriate expressions for the ET rates are used.

Using the Moser-Dutton ruler to express the microscopic variables in terms of the physical variables of the PCT, we get:(27a)(27b)(27c)(27d)(27e)

(Refer to Equations 22 and 23 for the definitions of and and .) Since is the only dimensionful quantity we need, its form is given explicitly in Equation 27d. The last parameter depends on , which because it involves the combined relaxation rate, fluorescent and otherwise, of the photoexcited state to its groundstate P, it cannot be estimated using the Moser-Dutton ruler. It is assumed to be a given quantity in our analysis. And finally, we have assumed that the reorganization energy is the same for the entire construct. Only minor modifications to Equation 27c are necessary if this last assumption is relaxed. The qualitative features of our conclusions are robust, although certain quantitative predictions will have to be reworked.

Our final goal is to use the relations in Equation 27 to set general bounds on the physical makeup of a generic protein-based PCT to optimize its performance. We do this by adjusting the physical parameters (for a fixed size of the construct) to satisfy the constraints in Equations 20 and 21 on the rates. This way, we are guaranteed that the performance metrics are optimized. The efficiency metric (defined in Equation 24) is then determined for a given and . Clearly, configurations with a large difference in and will ensure a high efficiency. It is therefore desirable to arrive at an independent set of constraints for the energies and the distances. We argue that this is mostly possible, primarily because the variables depend only on the driving forces and not on the separation distances (see Equations 27a and 27b). Hence any condition on the variables translates to conditions on , independently of the distance. These considerations are analyzed in detail next.

Maximizing the QSS yield and lifetime: physical constraints.

In Equations 20 and 21 we identified two sets of conditions necessary for the creation of a QSS with a high charge separation yield and lifetime. We can now see what effects these constraints impose on the physical makeup of a PCT. In particular, our aim is to arrive at a set of independent constraints for the energies and distances.

Energy constraints - fundamental limits on the absorption wavelength of the primary-donor.

From Equation 27a we note that the ratio is a factor 10 smaller for approximately every meV difference in the reduction potentials . We conclude that the first constraint for the existence of a QSS, stated in Equation 20, is satisfied provided:(28)

Since depends exponentially on , the strong inequality on translates to a weak inequality on . This simple observation is the key to the viability of our general mathematical analysis of a PCT. Small adjustments to the physical parameters can drive the system into the QSS regime and affect large changes in the performance metrics thus allowing us to arrive at a set of practically realizable bounds on the physical parameters.

From Equation 27b we see that the second condition in Equation 20, , is satisfied if for photon energies(29)

The low energy range results in a small which reduces the efficiency as seen from Equation24, and is therefore not a useful range for our purpose.

Equation 21 presents the constraints necessary to maximize the yield . The energy dependent term for in Equation 27c is formed out of the product of the sum and difference of the driving forces. The difference term is proportional to the efficiency and is therefore always positive. To maintain for all , the sum must satisfy . Since a large increases the efficiency from Equation 24, for practical purposes it is sufficient to ensure that . The two conditions for can be combined as:(30)where max implies the larger of the two variables a and b. Thus, a satisfies conditions for both high and , and a will either result in a loss of efficiency or yield. We thus predict that high yield, high efficiency QSS formation in a triad requires that back electron transfer from A to P be so downhill as to be well into the Marcus inverted region (see Figure 4.) This greatly slows the rate of this ET, allowing the donor molecule time to re-reduce the primary-donor molecule.

thumbnail
Figure 4. The optimal range for and are shown on the Marcus curve.

A high yield, high efficiency QSS formation in a triad requires that back electron transfer from A to P be so downhill as to be well into the Marcus inverted region. To see this, we substitute in Equation 27b so that , from which it immediately follows that the condition is satisfied if the mean value . The condition was derived in Equation 20 to be a necessary condition for the formation of a QSS.

https://doi.org/10.1371/journal.pone.0036065.g004

The upper limit is necessary to facilitate the electron transfer from the photoexcited primary-donor . This, however, has certain limitations: as approaches the photoexcitation energy , the back ET governed by the uphill rate (which is set to zero in our scheme) will become relevant - see Figure 3. This will provide yet another route for the charge separated state to decay to the groundstate thus reducing the performance. Hence, we put an upper cut-off on . To obtain this upper cut-off, we study the behavior of the ratio of the uphill vs downhill rates using the Moser-Dutton ruler and find that (similar to the ratio in Equation 27a)(31)

This clearly suggests that as long as the uphill driving force meV, the back reaction is exponentially suppressed. By direct simulation (not shown here), we find that our results obtained by setting are unaffected if a difference of the order of meV or higher is maintained. Although larger values will reduce the efficiency, a difference of 100 meV affects the efficiency by less than 10%.

Finally, we analyze in Equation 27e. Since it can be expressed in terms of the ratios and , no new energy constraints can be obtained. Instead, we show below that requiring (Equation 21) provides useful insight into the geometrical construction of the PCT.

Distance constraints - optimal placement of the three cofactors.

Since (see Equation 27e), maintaining can only be done at the expense of increasing which is counterproductive as we require both and for maximum yield (Equation 21). An optimal compromise can be reached by adjusting the distance . To see this, we write the dependence explicitly in Equation 27e by combining it with Equations 33 and 34 to give . Hence, once the energy terms are optimized for a fixed total length , we predict that arranging for(32)will significantly reduce . Provided , an order-of-magnitude suppression of is achieved if , i.e., . Hence, can be fine-tuned to increase the yield.

There is a relatively simple physical explanation for our prediction. This is due in part to the fact that while electron transfer rates in proteins are strongly distance dependent, the equilibria are not. As noted in Equation 19b, there are three pairs of rate constants which determine quantum yield, of which the parameter involves electron transfers that are the forward and reverse of each other between P and D. Since ratios involving forward and backward rates for any particular triad are not dependent on distance, the parameter is distance independent. On the other hand, the remaining two pairs, and , are distance dependent: the first is the initial ET between A and P which competes with the relaxation processes encompassed by . In this case the actual rate, and therefore the distance, plays a direct role in the final yield. This constrains the primary-donor and acceptor cofactors to be close enough to out-compete . The second is the competing pair of electron transfers which can occur from state I: reverse electron transfer from A to P forming G vs. the formation of C by electron transfer from D to P. This second pair is a weaker constraint given the fact that electron transfer from A to P is well into the Marcus inverted region. Viewed in this light it is not surprising that optimal arrangements move the primary-donor and acceptor closer together (see Figure 4 for a demonstration of this using commonly observed parameters). The full dependence of and on are discussed further in the discussion.

Finally, regarding the total size : the dependence of and in Equations 19a and 19b are fully governed by the rate constant defined in Equation 27d. It follows that while the lifetime grows with as , the yield is suppressed as .

This completes our analysis of the fundamental constraints on the physical parameters for an optimized PCT. The guidelines listed in Equations 28–32 are relevant to any protein based PCTs where the Moser-Dutton ruler is applicable.

Discussion

In Equations 28–32, we arrived at a set of constraints on the physical makeup of a high performance PCT capable of creating and maintaining a high yield charge separated state in a QSS for a significant length of time. We now apply these results to study the efficiency of such PCTs.

While analysis of many PCT constructs focus on the charge separation lifetime, [6], it is clear that the arrangement which gives the longest possible lifetime will oftentimes make a less efficient solar energy conversion component. The charge separated state must only last as long as the mechanism for extracting this potential energy requires. After this condition is met, factors which maximize the yield and efficiency of QSS formation ( and ) are paramount, as these determine the eventual power output. Thus, in the following we fix the lifetime ms in our analysis.

In Figure 5, we start with a set of parameters that are typical of photonic energy transduction in proteins: The reorganization energy varies in the range of 0.7 to 1.4 eV for cofactors bound within typical native proteins, with taking higher values with decreasing hydrophobicity in the local cofactor environment [19]. Light frequencies are in the near infrared and higher. We use eV and eV (690 nm) as a starting point. Note that is satisfied consistent with Equation 29. To satisfy the energy constraint in Equation 30, we choose the range eV. [Note that the highest value for is 100 meV less than for the reasons described following Equation 31.] Electron tunneling distances in biology range from 4–14 Å, with the shorter limit that of Van der Waals contact and the longer setting a millisecond time limit on electron transfer rates [29], [31]. Hence, the sum of the distances between the cofactors are typically in the range ; we use . Instead of specifying the final parameter, , we specify the QSS lifetime ms and solve Equation 19a for for different values of and (for a fixed ). For self-consistency, we check that the values obtained using these parameters all satisfy Equation 28 in the optimal range.

thumbnail
Figure 5. Sensitivity of the yield and efficiency of a typical PCT to and .

The following parameters are fixed: The light frequency eV, the reorganization energy eV, the size , and the relaxation rate at ns. The driving force for each choice of and is obtained by solving Equation 19a setting ms. All the relations necessary to invert Equation 19a for can be found in Equation 27. (A) Illustration of possible changes in made while keeping fixed. (B) Predictions for made using differing values of plotted as a function of . Open symbols are used to indicate and solid symbols for . Note that in each case, a maximum of is achieved at some optimal . (C) Re-plot of the same data explicitly showing the variation in yield and efficiency as and are varied. is defined in Equation 24. Legends mark different values varied in increments evaluated at the same points as in (B). The value at the maximum are labeled explicitly.

https://doi.org/10.1371/journal.pone.0036065.g005

Several things are immediately apparent upon inspection of the data in Figure 5. First, the yield in Figure 5B is strongly dependent on , with a maximum value in each case being reached at a configuration where the primary-donor P is closer to the acceptor site than the donor site as predicted in Equation 32. Second, the efficiency in Figure 5C is considerably enhanced as is increased closer to the maximum value .

To gain further insight on the dependence of the metrics and on the size and self-relaxation (fluorescence) rate , we study the variation of the optimized PCT metrics, i.e., the metrics obtained after adjusting for maximum yield (i.e, we track the location of maximum yield in Figue 5 as and are varied). We find that once optimized for , the two metrics and are mostly orthogonal in terms of their determinants. This is demonstrated by Figure 6A where the maximum yield is seen to be strongly suppressed with increasing while the efficiency at maximum yield is robust. The former is due to the decrease in caused by the increase in distance, resulting in a smaller partitioning factor (Equation 16). As Figure 6B demonstrates, this loss can be alleviated by decreasing the rate of self-relaxation, , of the excited primary-donor .

thumbnail
Figure 6. (A) Orthogonality of the yield, , and the energy storage efficiency, , of QSS formation by the PCT.

For each point, and are set to the values that maximizes within the limits set by and as in Figure 5. is strongly sensitive to the separation distance, , and is primarily sensitive to . (B) The decrease in the maximal values of with increasing plotted for different values of and . At large values of the optimized yield is primarily dependent on .

https://doi.org/10.1371/journal.pone.0036065.g006

Conclusions

We have generated an analytical solution for the time behavior of the PCT and explored its dependence on the architecture, the reduction potentials of its components, and the absorption frequency of the primary-donor cofactor. Our primary findings are two: First, that a high efficiency, high yield PCT will have an absorption frequency more than twice the reorganization energy of the first electron transfer, and second, that the distance metric (the relative distance of the acceptor and the donor from the primary-donor) plays an important role in the determination of the yields.

We remark that our use of the Moser-Dutton ruler clearly does not capture all the subtle details of protein ET reactions. For example, the assumption that ET rates drop-off exponentially with distance ignores possible effects of the intervening medium when present [32]. Secondly, some experimental results point to an asymmetric Marcus curve [33], that is known to be relevant when certain high-frequency intramolecular vibrations are active, are not accounted for. It is a simple matter to include these effects into Equations 20 and 21, which as we noted earlier are model-free, they provide fundamental constraints on the microscopic rate constants derived to maximize the yield and the lifetime of the charge separated states in the QSS regime. Further work is needed to study the quantitative effects these corrections will have on our conclusions. We show below, however, that our analysis incorporating the simple Moser-Dutton ruler is able to successfully explain a number of remarkable features observed in Nature.

Implications for natural systems

The first implication sets a long-wavelength limit or red-edge [34] for efficient solar energy conversion. It is estimated that the reorganization energies scale from 0.7 eV to 1.4 eV for typical proteins and cofactors bound in local environments varying from less to more hydrophobic [19]. These values predict that the longest effective wavelength for solar energy conversion is about 890 nm, correlating to the lower value. Longer wavelengths are possible, but this would necessitate a loss in either yield or energy. Our analysis is primarily limited by the fact that we include only three discrete sites for electron localization. Natural photosynthetic proteins have additional acceptor molecules, which enable the stepwise diffusion of the electron further away from the primary-donor. Their effect on the behavior of the PCT is unclear.

However, we do note in Figure 7 that at present the observed wavelength limits for oxygenic photosynthesis, an energetically demanding process in that it must create oxidizing potentials high enough to oxidize water [2], are within the values [35] we predict. Furthermore the limits observed for charge separation in any natural organism, those from bacterial photosynthesis [34], are within 150 nm, or 160 meV, of that predicted by our model, as shown in Figure 7. This suggests that efforts to re-engineer natural systems to utilize longer wavelengths of light, and thus garner a greater fraction of the solar emission spectrum [36] will result in considerable losses of either yield or conversion efficiency to do so.

thumbnail
Figure 7. Predicted long-wavelength limit or red-edge for efficient solar energy conversion.

Photon energies smaller than cause a loss in either yield or energy storage efficiciency. For each point, the value of used maximizes within the constraints set by and as in Figure 5. The values are calculated as where and 0.4 eV. Wavelength limits of natural systems depicted above the axis are taken from [34].

https://doi.org/10.1371/journal.pone.0036065.g007

The other prediction is that yields are maximized by placing the primary-donor closer to the acceptor than the donor cofactor. This again may be altered when further discrete electron binding sites are added to the construct, but we again note that for the limited subset of photosynthetic proteins which have structures which include the donor cofactor, the primary-donors are indeed positioned in this manner (Figure 8).

thumbnail
Figure 8. Representative structures of natural photosynthetic cofactor triads.

Primary donors P are colored green with the donor D and acceptor A cofactors colored red in each structure. Distances are measured edge-to-edge. (left) Reaction Center complex from Blastochloris viridis (PDB ID 2X5U) [37], (center) Photosystem II from Thermosynechococcus elongates (PDB ID 3BZ1) [38], and (right) is Photosystem I Plastcyanin complex from Prochlorothrix hollandica created by computational docking [39]. Images and distances were created using Pymol.

https://doi.org/10.1371/journal.pone.0036065.g008

Engineering parameters for artificial charge separation constructs

This analysis sets out the optimal physical composition of an artificial protein-based charge separation construct. It demonstrates that efficient, high yield charge separation can be engineered with values that are both feasible to engineer and within the ranges observed in natural systems. It further identifies the molecular properties which are important targets for engineering improved PCTs. Principle among these is the control of the reorganization energy, . A smaller value of will enable the utilization of longer wavelengths of light, enabling the possible utilization of a larger fraction of the solar emission spectrum. There have been very few experimental determinations of values within a protein, and even less work on manipulating or optimizing its magnitude. However, it is apparent that it will be important to be able to manipulate this parameter effectively.

While we have identified as a critical parameter for high yield constructs, at smaller cofactor separation distances the tolerances for are very small. The large changes engendered by even a change in make high yield small constructs difficult to create. Larger constructs have broader maxima, but in this case yields are reduced due to unproductive primary-donor relaxation rates, or (see Equation 16). Consequently the creation of primary-donor cofactors with longer excited state lifetimes is paramount. As Figure 6B demonstrates, longer lifetime cofactors will enable significantly larger constructs, and thus eases the optimization of . We further note that while our analysis uses the protein-specific Moser-Dutton ruler, which models coupling as an exponential drop-off in electron transfer rate with distance, the model-free portion of this analysis leading to Equations 20 and 21 are applicable to synthetic constructs as well. The distance dependence in these systems depends strongly on the nature of the bridging elements which connect the triad cofactors, and the analysis presented here predicts that the coupling must in general be as strong as possible between the primary-donor and acceptor. In a protein this means putting them close together since the “bridge” is always the same. In a bridged system this means choosing a bridge that maximizes the coupling, but it doesn’t necessarily mean bringing them closer together.

Acknowledgments

RLK would like to thank Art Van der Est, Brock University Chemistry department, Thomas Haines, CCNY Chemistry department, and Marilyn Gunner, CCNY Physics department, for helpful suggestions and discussion pertaining to this manuscript. WL and AP would like to thank the Department of Cell & Molecular Biology and the Department of Physics and Engineering Physics at Tulane University for their kind hospitality.

Author Contributions

Conceived and designed the experiments: AP LM RLK. Performed the experiments: AP LM WL ACM RLK. Analyzed the data: AP LM WL ACM RLK. Contributed reagents/materials/analysis tools: AP LM WL ACM RLK. Wrote the paper: AP LM RLK.

References

  1. 1. Williamson A, Conlan B, Hillier W, Wydrzynski T (2011) The evolution of photosystem II: insights into the past and future. Photosynthesis Research 107: 71–86.
  2. 2. McConnell I, Li GH, Brudvig GW (2010) Energy conversion in natural and artificial photosynthesis. Chemistry & Biology 17: 434–447.
  3. 3. Moser CC, Page CC, Dutton PL (2005) Tunneling in PSII. Photochemical & Photobiological Sciences 4: 933–939.
  4. 4. Moser CC, Page CC, Dutton PL (2006) Darwin at the molecular scale: selection and variance in electron tunnelling proteins including cytochrome c oxidase. Philosophical Transactions Of The Royal Society B-Biological Sciences 361: 1295–1305.
  5. 5. Meyer TJ (1989) Chemical approaches to artificial photosynthesis. Accounts Of Chemical Research 22: 163–170.
  6. 6. Imahor H, Guldi DM, Tamaki K, Yoshida Y, Luo C, et al. (2001) Charge separation in a novel artifical photosynthetic reaction center lives 380 ms. J Am Chem Soc 123: 6617–6628.
  7. 7. Gust D, Moore TA, Moore AL (2001) Mimicking photosynthetic solar energy transduction. Accounts Of Chemical Research 34: 40–48.
  8. 8. Alstrum-Acevedo JH, Brennaman MK, Meyer TJ (2005) Chemical approaches to artificial photo-synthesis. 2. Inorganic Chemistry 44: 6802–6827.
  9. 9. Malak RA, Gao ZN, Wishart JF, Isied SS (2004) Long-range electron transfer across peptide bridges: The transition from electron superexchange to hopping. Journal of the American Chemical Society 126: 13888–13889.
  10. 10. Kodis G, Terazono Y, Liddell PA, Andreasson J, Garg V, et al. (2006) Energy and photoinduced electron transfer in a wheel-shaped artificial photosynthetic antenna-reaction center complex. J Am Chem Soc 128: 1818–1827.
  11. 11. Moore GF, Hambourger M, Poluektov MGOG, Rajh T, Gust D, et al. (2008) A bioinspired con- struct that mimics the proton coupled electron transfer between P680(center dot)+ and the Tyr(z)-His190 pair of photosystem II. Journal of the American Chemical Society 130: 10466.
  12. 12. Gust D, Moore TA, Makings LR, Liddell PA, Nemeth GA, et al. (1986) Photodriven electron-transfer in triad molecules - a 2-step charge recombination reaction. Journal of the American Chemical Society 108: 8028–8031.
  13. 13. Gust D, Moore TA, Moore AL (2009) Solar fuels via artificial photosynthesis. Accounts of Chemical Research 42: 1890–1898.
  14. 14. Hay S, Wallace BB, Smith TA, Ghiggino KP, Wydrzynski T (2004) Protein engineering of cytochrome b(562) for quinone binding and light-induced electrons transfer. Proceedings of the National Academy of Sciences of the United States of America 101: 17675–17680.
  15. 15. Conlan B, Cox N, Su JH, Hillier W, Messinger J, et al. (2009) Photo-catalytic oxidation of a di-nuclear manganese centre in an engineered bacterioferritin ‘reaction centre’. Biochimica Et Biophysica Acta-Bioenergetics 1787: 1112–1121.
  16. 16. Fry HC, Lehmann A, Saven JG, DeGrado WF, Therien MJ (2010) Computational design and elaboration of a de novo heterotetrameric alpha-helical protein that selectively binds an emissive abiological (porphinato) zinc chromophore. Journal of the American Chemical Society 132: 3997–4005.
  17. 17. Braun P, Goldberg E, Negron C, von Jan M, Xu F, et al. (2011) Design principles for chlorophyll-binding sites in helical proteins. Proteins-Structure Function And Bioinformatics 79: 463–476.
  18. 18. Koder RL, Dutton PL (2006) Intelligent design: the de novo engineering of proteins with specified functions. Dalton Transactions 25: 3045–3051.
  19. 19. Moser CC, Anderson JLR, Dutton PL (2010) Guidelines for tunneling in enzymes. Biochmicia et Bophysica Acta-Bioenergetics 1797: 1537–1586.
  20. 20. Nanda V, Koder RL (2010) Designing artificial enzymes by intuition and computation. Nature Chemistry 2: 15–24.
  21. 21. Zusman LD, Beratan DN (1999) Electron transfer in three-center chemical systems. Journal Of Chemical Physics 110: 10468–10481.
  22. 22. Marcus RA (1956) Theory of oxidation-reduction reactions involving electron transfer.1. Journal Of Chemical Physics 24: 966–978.
  23. 23. Marcus RA, Sutin N (1985) Electron transfers in chemistry and biology. Biochim Biophys Acta 811: 265–322.
  24. 24. Marcus RA (1993) Electron transfer reactions in chemistry. Theory and experiment. Reviews of Modern Physics 65: 599–610.
  25. 25. Hopfield JJ (1974) Electron-transfer between biological molecules by thermally activated tunneling. Proc Natl Acad Sci USA 71: 3640–3644.
  26. 26. Redi M, Hopfield JJ (1980) Theory of thermal and photoassisted electron-tunneling. Journal Of Chemical Physics 72: 6651–6660.
  27. 27. Cho M, Silbey RJ (1995) Nonequilibrium photoinduced electron transfer. Journal Of Chemical Physics 103: 595–606.
  28. 28. DeVault D, Parkes JH, Chance B (1967) Electron tunelling in cytochromes. Nature 215: 642–644.
  29. 29. Page CC, Moser CC, Chen X, Dutton PL (1999) Natural engineering principles of electron tunnelling in biological oxiation-reduction. Nature 402: 47–51.
  30. 30. Moser CC, Page CC, Chen X, Dutton PL (2000) Electron Transfer in Natural Proteins: Theory and Design. Scrutton NS, editor, Enzyme-Catalyzed Electron and Radical Transfer, Plenum/Kluwer Press, The Netherlands, volume 3. pp. 1–30.
  31. 31. Moser CC, Keske JM, Warncke K, Farid RS, Dutton PL (1992) Nature of biological electron-transfer. Nature 402: 796–802.
  32. 32. Gray HB, Winkler JR (2003) Electron tunneling through proteins. Q Rev Biophys 36: 341–372.
  33. 33. Xu Q, Gunner MR (2000) Temperature dependence of the free energy, enthalpy and entropy of P+Q(A)(-) charge recombination in Rhodobacter sphaeroides R-26 reaction centers. Journal of Physical Chemistry B 104: 8035–8043.
  34. 34. Kiang NY, Siefert J, Govindjee , Blankenship RE (2007) Spectral signatures of photsynthesis. I. Review of earth organsims. Astrobiology 7: 222–251.
  35. 35. Chen M, Schliep M, Willows RD, Cai ZL, Neilan BA, et al. (2010) A red-shifted chlorophyll. Science 329: 1318–1319.
  36. 36. Blankenship RE, Tiede DM, Barber J, Brudvig GW, Fleming G, et al. (2011) Comparing photo- synthetic and photovoltaic efficiencies and recognizing the potential for imporvement. Science 332: 805–809.
  37. 37. Wohri AB, Katona G, Johansson LC, Fritz E, Malmerberg E, et al. (2010) Light-induced structural changes in a photosynthetic reaction center caught by laue diffraction. Science 328: 630–633.
  38. 38. Guskov A, Kern J, Gabdulkhakov A, Broser M, Zouni A, et al. (2009) Cyanobacterial photosystem II at 2.9-Å resolution and the role of quinones, lipids, channels and chloride. Nature Structural & Molecular Biology 16: 334–342.
  39. 39. Myshkin E, Leontis NB, Bullerjahn GS (2002) Computational simulation of the docking of prochlothrix hollandica plastocyanin to photosystem 1: Modeling the electron transfer complex. Biophysical Journal 82: 3305–3313.