Advertisement
Research Article

Recognition of Anesthetic Barbiturates by a Protein Binding Site: A High Resolution Structural Analysis

  • Simon Oakley,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • L. Sangeetha Vedula,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • Weiming Bu,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • Qing Cheng Meng,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • Jin Xi,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • Renyu Liu,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • Roderic G. Eckenhoff,

    Affiliation: Department of Anesthesiology and Critical Care, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America

    X
  • Patrick J. Loll mail

    ploll@drexelmed.edu

    Affiliation: Department of Biochemistry and Molecular Biology, Drexel University College of Medicine, Philadelphia, Pennsylvania, United States of America

    X
  • Published: February 16, 2012
  • DOI: 10.1371/journal.pone.0032070

Abstract

Barbiturates potentiate GABA actions at the GABAA receptor and act as central nervous system depressants that can induce effects ranging from sedation to general anesthesia. No structural information has been available about how barbiturates are recognized by their protein targets. For this reason, we tested whether these drugs were able to bind specifically to horse spleen apoferritin, a model protein that has previously been shown to bind many anesthetic agents with affinities that are closely correlated with anesthetic potency. Thiopental, pentobarbital, and phenobarbital were all found to bind to apoferritin with affinities ranging from 10–500 µM, approximately matching the concentrations required to produce anesthetic and GABAergic responses. X-ray crystal structures were determined for the complexes of apoferritin with thiopental and pentobarbital at resolutions of 1.9 and 2.0 Å, respectively. These structures reveal that the barbiturates bind to a cavity in the apoferritin shell that also binds haloalkanes, halogenated ethers, and propofol. Unlike these other general anesthetics, however, which rely entirely upon van der Waals interactions and the hydrophobic effect for recognition, the barbiturates are recognized in the apoferritin site using a mixture of both polar and nonpolar interactions. These results suggest that any protein binding site that is able to recognize and respond to the chemically and structurally diverse set of compounds used as general anesthetics is likely to include a versatile mixture of both polar and hydrophobic elements.

Introduction

General anesthetics, either inhaled or injected, are mainstays of modern surgery. They are widely used to reversibly decrease patients' sensation of otherwise painful and unpleasant medical procedures. General anesthetics function by decreasing synaptic transmission of action potentials, primarily within the central nervous system. Overdoses of anesthetics, though rare in clinical practice, are potentially lethal as these drugs progressively recruit other “off-pathway” actions, such as cardiovascular and respiratory depression.

The original anesthetic agents were discovered serendipitously and then served as lead compounds for a decades-long process that has resulted in the more efficacious and somewhat safer agents that are used today. This progress occurred without definitive knowledge of the pharmacological targets of these drugs; indeed, even today questions remain as to which targets are the most clinically relevant. However, it is widely believed that general anesthetics act at multiple protein sites [1] and that these sites include membrane-bound channel proteins within the central nervous system. Likely candidates include the Cys-loop ligand-gated ion channels [2], [3], some potassium channels [4], and the mitochondrial respiratory chain [5].

Many of these potential anesthetic targets are predicted to be dominated by alpha helical structure, particularly in their membrane-spanning regions. These regions typically contain bundles of helices, associating side-to-side in a parallel or antiparallel manner. In the rare cases where genetic or biochemical mapping data are available, the anesthetic-sensitive residues have been found to be located in these membrane-spanning regions, in areas predicted to lie between adjacent subunits [6], [7], [8], [9], [10], [11], [12], [13]. However, the details of these binding sites, including how they recognize anesthetics, will not be fully appreciated until high-resolution structures are obtained for pharmacologically relevant targets. Unfortunately, this goal may not be realized for some time, owing to the difficulties associated with expressing, purifying, and crystallizing large eukaryotic membrane proteins [14].

Until structures become available for mammalian membrane-bound anesthetic targets, it can be fruitful to use surrogate proteins as models for protein-anesthetic recognition. Several soluble proteins of known structure contain binding sites that recognize a wide variety of anesthetic agents, including serum albumin [15], firefly luciferase [16], and synthetic peptides [17]. In addition, GLIC, a prokaryotic homolog of eukaryotic ligand-gate ion channels, has been shown to be inhibited by various anesthetics [18], and its structure has recently been determined in complex with two such drugs [19]. However, an arguably more useful surrogate is horse-spleen apoferritin, because it binds both inhaled and injected general anesthetics with affinities that are clinically relevant, and which correlate well with clinical measures of anesthetic potency [20], [21]. Further, apoferritin is commercially available, very stable, and crystallizes readily, making for a tractable model system.

We have termed apoferritin a “unitary” binder of anesthetics because its single binding site is able to recognize anesthetic compounds belonging to widely varying chemotypes [21]. These compounds are bound with affinities that correlate well with their potencies, arguing that the apoferritin site shares physicochemical features with the binding sites in clinically relevant targets. Furthermore, in a homologous series of analogs of the injectable anesthetic propofol, each compound's affinity for apoferritin was found to be strongly correlated with its ability to potentiate GABA responses at the GABAA receptor [22], suggesting that the apoferritin anesthetic binding site may specifically resemble that of the GABAA receptor. Selectivity for this chemiarchitecture is demonstrated by the fact that non-immobilizers do not bind the apoferritin site [23]. In addition to these pharmacological similarities, the apoferritin site may share topological elements in common with anesthetic binding sites in human membrane-bound ion channels, since the apoferritin site lies at the interface between two helical bundle domains.

Barbiturates were discovered during the first decades of the twentieth century, and rapidly became widely used as sedatives and general anesthetics [24]. Since reaching their heyday in the 1930’s and 1940’s, they have been largely replaced by propofol and other sedatives, such as the benzodiazepines, which are less prone to overdose, abuse, misuse and addiction. However, phenobarbital is still used as a sleep aid, thiopental is still used as an induction agent, and pentobarbital is still widely used in veterinary practice (see Figure 1 for the chemical structures of these compounds). The molecular details of how barbiturates interact with their targets remain largely unknown, as there exist no structures for protein-barbiturate complexes in the Protein Data Bank. Here, we show that pentobarbital and thiopental, like several other general anesthetics, bind to a common cavity in apoferritin. This result further supports the notion that apoferritin is a unitary recognizer of GABAergic anesthetics, and validates the protein's use as a surrogate model for the clinically relevant binding sites of general anesthetics.

thumbnail

Figure 1. Chemical structures of selected barbiturates.

doi:10.1371/journal.pone.0032070.g001

Results

Apoferritin binds barbiturates

Isothermal titration calorimetry (ITC) was used to confirm that phenobarbital, pentobarbital, and thiopental bind directly to apoferritin, with dissociation constant values lying in the range 10 to 700 µM (Table 1). Thiopental binds most tightly; the affinity of pentobarbital is approximately 6-fold lower, while phenobarbital's affinity for apoferritin is 50-fold lower than that of thiopental. All compounds display favorable enthalpies of binding. The affinities of the barbiturates for apoferritin are very similar to reported EC50 values for general anesthesia in mammals and for enhancement of GABAA activity (Table 1).

thumbnail

Table 1. Binding, physical, and activity data for barbiturates.

doi:10.1371/journal.pone.0032070.t001

The methylbutyl chain found in pentobarbital and thiopental can exist as one of two optical isomers, with the stereocenter at the branch point between the methyl and butyl groups; the difference in anesthetic potency between the two stereoisomers is small (roughly 2-fold), with the S-enantiomer being the more potent [25]. Racemic mixtures of these compounds are used clinically. To probe the effect of barbiturate stereochemistry on apoferritin binding, we purified the optical isomers of thiopental and measured their binding affinities using ITC (Table S1). The S-enantiomer was found to bind 1.5-fold more tightly than the R-form, mirroring the clinically observed difference in potencies.

Structure determination

To determine the site at which the barbiturates bind, apoferritin was co-crystallized with thiopental and pentobarbital and the crystal structures of the complexes were determined (Table 2; because of phenobarbital's low affinity for apoferritin, the crystal structure of this complex was not attempted). The crystals that we obtained had space groups and unit cells isomorphous with previous apoferritin structures, and structure determination via molecular replacement confirmed the same crystal system. Initial electron density maps contained clear density in the anesthetic binding site, confirming the presence of the barbiturate ligands. For both pentobarbital and thiopental, the initial electron density of the ligand was distinct from that seen in the unliganded structure, where the binding site contains four water molecules [21]. In both complexes, the electron density corresponding to the barbiturate ring was more distinct than the density for the alkyl substituents, suggesting that the ring structure may be held more tightly than the ethyl and methylbutyl chains.

thumbnail

Table 2. Crystallographic data collection and refinement statistics.

doi:10.1371/journal.pone.0032070.t002

Apoferritin forms a highly symmetric 24-mer. Each protomer in the oligomer forms a helical bundle composed of four long antiparallel helices, with a fifth helix capping one end of the bundle, and an extended crossover strand connecting the second and third helices. Although our apoferritin preparation contains both H- and L-chains, only the L-protomers have been modeled in this structure (see Methods). The overall structure of the apoferritin molecule is not significantly altered in response to barbiturate binding; root-mean-square differences in Cα positions are less than 0.1 Å when either barbiturate complex structure is superimposed upon the unliganded apoferritin structure.

The apoferritin anesthetic binding site is located within a cavity at the interface between two protomers; the cavity is largely buried within the protein interior, but is connected to the protein surface (and thus to bulk solvent) via two small funnel-shaped openings. The two protomers forming the cavity are related by a 2-fold symmetry axis that runs through the center of the binding site. Hence, equivalent residues from both subunits contribute to the cavity surface, and an anesthetic molecule bound within this cavity has the potential to interact with both copies of a given residue. The symmetry of the binding site dictates that the ligand can occupy two positions, related to one another by a 180° rotation. These two positions overlap, so that in a given cavity the ligand can adopt only one of the two symmetry-related conformations; however, because the electron density is averaged over the entire crystal, the map will reflect both conformations.

Thiopental binding site

Thiopental interacts with apoferritin via a hydrogen bond, a possible electrostatic interaction, and multiple hydrophobic contacts. The hydrogen bond is formed between the ring nitrogen of the barbiturate and Ser-27 (Figure 2A). The geometry of this hydrogen bond is close to ideal; the oxygen-nitrogen distance is 2.87 Å and the serine's hydroxyl oxygen lies close to the plane of the barbiturate ring (0.002 Å perpendicular distance from the oxygen to the ring plane). The angle formed by the barbiturate ring nitrogen, the serine hydroxyl oxygen, and the serine beta carbon is 111.9°, also highly favorable [26].

thumbnail

Figure 2. Stereoviews showing the anesthetic binding site of apoferritin with A) thiopental and B) pentobarbital.

The hydrogen bond between the drug and Ser-27 is shown as a black dashed line. In both images the ligands are depicted as sticks; color code: carbon, yellow; nitrogen, blue; oxygen, red; and sulfur, magenta. The electron density shown is 2Fo-Fc density calculated from the final refined structures, contoured at sigma level of 0.8 and carved around the ligands. Figures 2 and 3 were generated using PyMOL (The PyMOL Molecular Graphics System, Schrödinger, LLC).

doi:10.1371/journal.pone.0032070.g002

An electrostatic interaction may occur between the barbiturate ring sulfur and the guanidino group of Arg-59. The Arg-59 side chain is present in two conformations: one similar to the “closed” conformation seen in the water-bound (unliganded) apoferritin structure, the other to the “open” conformation found in the apoferritin-propofol complex structure [21]. In the pentobarbital complex, the closed conformer of the arginine places a guanidino nitrogen 3.8 Å from the barbiturate ring sulfur. No electron density is observed for any other nearby counter-ion. This sulfur atom is capable of a keto-enol tautomeric transition, and is assigned a formal charge of -1 in the enol form. We cannot directly determine whether the drug adopts the keto or enol form in our structure, because the structural differences between the two forms are minute. Although the close presence of the Arg-59 guanidino group suggests that the sulfur could possess at least partially negative character, the generally hydrophobic nature of the ligand binding pocket makes it likely that the ligand adopts the less polar keto form.

Hydrophobic interactions occur between the protein and the ethyl and methylbutyl chains that extend from the thiopental ring. The ethyl group of the thiopental ligand sits atop a hydrophobic patch within the binding site that is created by the side chains of Tyr-28 and Leu-81 from one apoferritin monomer and Leu-24 and Leu-81 from the symmetry-related apoferritin molecule. The atoms in the ligand and protein that participate in this interaction are all nonpolar and the distances between interacting atoms range from 3.7 to 4.5 Å. The closest polar group to ligand's ethyl chain is the carbonyl group of Leu-24, which is 5.0 Å from the thiopental.

The methylbutyl group of the ligand lies in the center of the hydrophobic cavity, with its tail extending into the funnel-shaped aperture that connects the anesthetic binding site with the surface of the protein. It packs against methylene groups of the Arg-59 side chain; this arginine side chain forms much of the cap that closes off the anesthetic binding site from solvent. Both stereoisomers were consistent with the electron density in the binding site; given their similar affinities, the ligand was modeled as a mixture of R- and S-forms of the molecule. The majority of the methylbutyl group lies in a position that overlaps electron density corresponding to the barbiturate ring of the symmetry-related copy of the ligand. This fact, together with the presumed presence of different optical isomers, means that the precise positions of the atoms in the methylbutyl group are not well determined.

Pentobarbital binding

Pentobarbital binds apoferritin in a manner that is directly equivalent to that seen with thiopental. A similar hydrogen bond is seen between a barbiturate ring nitrogen and the hydroxyl moiety of Ser-27 (nitrogen-oxygen distance = 2.83 Å; distance between the serine hydroxyl oxygen and the plane of the barbiturate ring = 0.4 Å; angle formed by Cβ27—Oγ27—barbiturate ring nitrogen = 111.2°; Figure 2B). As is the case with thiopental, Arg-59 adopts two alternate conformers in the pentobarbital complex structure, and a guanidino nitrogen of one conformer lies 3.6 Å from the ring oxygen, contributing a possible electrostatic component to pentobarbital recognition. The ethyl and methylbutyl chains of the pentobarbital molecule lie in similar positions to those occupied by their counterparts in the thiopental structure, and make similar interactions with the protein. An apparent steric clash exists between the methylbutyl group and the hydroxyl group of Ser-27 (carbon-oxygen distance 2.6 Å). This may merely reflect a lack of precision in positioning the atoms in the methylbutyl group, similar to that encountered with thiopental; alternatively, this copy of Ser-27 (the symmetry mate of the Ser-27 side chain that is hydrogen bonding to the barbiturate ring) may adopt an alternate conformer that we were unable to discern in the electron density.

Discussion

A consensus now exists that general anesthetics exert their effects through binding and modulating the activities of ion channels and other integral membrane proteins. Unfortunately, despite recent successes [19], it remains difficult to visualize the details of how anesthetics interact with these targets, since integral membrane proteins are challenging systems for high resolution structural studies. Until structure determination for membrane proteins becomes routine, surrogate model systems will remain valuable tools for advancing our understanding of how proteins recognize anesthetics. Apoferritin arguably represents one of the most useful such models now available. Its structure is well characterized, and it recognizes a wide variety of inhaled and intravenous anesthetic agents. Importantly, apoferritin's binding affinities for different anesthetics are comparable to clinically relevant concentrations; in contrast, the prokaryotic ion channel GLIC displays very different patterns of anesthetic recognition than mammalian anesthetic targets [18], despite possessing a pentameric architecture that is similar to those of known mammalian targets such as the acetylcholine and GABAA receptors [27].

Barbiturates can now be added to the list of general anesthetics recognized by apoferritin, providing a second example of recognition of an injected general anesthetic (the first being propofol). Interestingly, both propofol and the barbiturates act largely via GABA transmission, as both can directly gate and potentiate the inhibitory GABAA receptor. For propofol and related compounds, affinity for apoferritin is very close to the EC50 for GABA potentiation [21]; the same appears true for barbiturates. EC50 values for GABA potentiation by thiopental, pentobarbital, and phenobarbital are close to their Kd values for apoferritin (Table 1), bolstering the argument that the anesthetic binding sites on apoferritin and the GABAA receptor share structural and physicochemical similarity.

Within the barbiturate class, different compounds potentiate GABA effects and mediate anesthesia with different potencies; these differences are largely mirrored in their affinities for apoferritin. It is therefore interesting to ask which features of the apoferritin-barbiturate interaction are responsible for these differences in affinity. Thiopental and pentobarbital are iso-structural, differing only at a single atom, and adopt essentially identical orientations and conformations within the apoferritin binding site. The slightly larger sulfur atom gives thiopental a slightly larger volume and surface area, but such trivial size differences seem unlikely to explain an approximate five-fold difference in affinity. A more likely explanation is thiopental's more hydrophobic nature, as reflected by its higher partition coefficient (Table 1). If indeed the apoferritin binding site preferentially recognizes thiopental on the basis of its lower polarity, then this argues that the form of the anesthetic bound to the protein is the less polar keto tautomer.

Phenobarbital has a substantially lower affinity for apoferritin than either thiopental or pentobarbital. While it is similar to in size to the other two compounds, it is more polar than either, consistent with an apoferritin binding site that prefers less polar ligands. Also, modeling suggests that phenobarbital's rigid phenyl ring could lead to steric clashes between the ligand and the protein; the methylbutyl substituent of thiopental and pentobarbital, while not much smaller than the phenyl ring, is substantially more flexible, and hence more easily accommodated within the binding site.

There are both similarities and differences in how apoferritin recognizes barbiturates versus other, chemically distinct classes of anesthetics (Figures S3 and S4). Similarity can be found in a common binding area shared by haloalkanes, halogenated ethers, propofol analogs, and barbiturates; this area is a small hydrophobic patch created by Tyr-28, Leu-24, and Leu-81 (Figures 3, S3, and S4). In the barbiturate complexes this hydrophobic patch interacts with the ethyl substituent, in the propofol complexes this position is occupied by an aromatic ring, and in the halothane and isoflurane complexes it is occupied by two fluorine atoms (Text S1).

thumbnail

Figure 3. Diverse general anesthetics utilize a common binding site in apoferritin.

A) Orthogonal views of the apoferritin dimer, shown as a partially transparent molecular surface encasing a cartoon representation of the backbone. The anesthetic binding site is marked by thiopental, which is shown in a red space-filling representation. B) Stereo view showing a close-up of the anesthetic binding site, in an orientation similar to that seen in the left half of the upper panel. Four different general anesthetics are shown in ball-and-stick representations: Thiopental (yellow); propofol (magenta); isoflurane (cyan); and halothane (orange). The protein backbone is shown in blue, while selected protein side chains are shown in light gray. All four compounds, despite belonging to different chemotypes, utilize the same binding cavity, in which their positions overlap extensively.

doi:10.1371/journal.pone.0032070.g003

Differences in ligand recognition exist between the apoferritin-barbiturate and apoferritin-propofol complex structures. Even though both propofol and the barbiturates contain aromatic rings, the planes of these rings are rotated nearly 90 degrees between the two classes of drug. The highly hydrophobic propofol analogs bind with their hydroxyl groups (their only potential hydrogen bond donor/acceptor) pointing toward the opening of the protein cavity, away from the cavity walls, and do not use this hydroxyl group to interact with the protein. In contrast, the position of the barbiturates allows them to hydrogen bond with Ser-27 of apoferritin. This hydrogen bond, together with a potential polar interaction between the barbiturate ring and Arg-59, are the most notable differences between how apoferritin recognizes the barbiturates and how it recognizes other general anesthetics. Apoferritin appears to rely principally upon van der Waals interactions when binding other anesthetics, with little or no contribution from polar interactions. van der Waals interactions do contribute to recognition of the barbiturates, particularly between the alkyl substituents of the drugs and hydrophobic side chains of the protein. However, the favorable enthalpies of binding provided by the polar interactions are likely to substantially exceed the contribution from these van der Waals interactions, and dominate the binding energies.

The exploitation of polar interactions for barbiturate recognition has interesting implications for anesthetic binding. First, it means that the apoferritin site (and probably any site that responds to multiple classes of general anesthetics) must be versatile, and able to rely to differing degrees upon hydrophobic versus polar interactions, depending upon the ligand. Such an amphipathic site should be able to recognize different targets in a versatile manner [28]. For example, apoferritin contains polar side chains within its hydrophobic cavity, but these side chains are capable of interacting with partners other than the ligand. In the absence of ligand, the hydroxyl group of Ser-27 can hydrogen bond with a backbone carbonyl oxygen of the protein; in the presence of barbiturates, this same side chain interacts with the drug. In this way, anesthetics can competitively alter hydrogen-bonding patterns within their binding site, and potentially affect protein stability or dynamics [29].

Another way in which proteins can flexibly recognize different ligands is by stretching or shrinking their binding pockets. However, proteins are limited in the degree to which they can expand or contract a cavity before their structural integrity is compromised. Thus, the volume of the anesthetic-binding cavity in apoferritin varies to some degree when binding different ligands, but affinity is reduced for ligands that are too large to be comfortably accommodated within the acceptable range of cavity volumes. Interestingly, thiopental and pentobarbital are larger than other apoferritin anesthetic ligands examined to date, and yet they are still bound with reasonably high affinity. We suggest that an explanation lies with the polar interactions that the barbiturates make within the apoferritin binding pocket.

For ligands that rely solely on van der Waals interactions for recognition, larger ligands have larger surface areas, and can therefore develop larger favorable enthalpies of binding; however, they will also be bound more snugly in the binding pocket, imposing an entropic penalty. At some point, the incremental enthalpic gains associated with increased surface area will be outweighed by the increasing entropic penalty. For nonpolar ligands, the competing enthalpic and entropic effects lead to maximum affinity when the ligand's volume corresponds to approximately 50–60% of the available cavity volume [30]. In contrast, strong polar interactions between a ligand and its target contribute substantially larger favorable enthalpies of binding than do van der Waals interactions, and so when polar interactions are present, greater losses in conformational entropy (and hence higher packing densities) can be tolerated. This appears to be the case with anesthetic binding to apoferritin (Figure 4). For propofol-like compounds that make no polar interactions with the protein, affinity decreases when ligand volume is increased beyond 50% of the cavity volume [21]. However, for compounds like thiopental and pentobarbital that make polar contacts with apoferritin, ligands can fill well over 50% of the available cavity volume, yet still bind with high affinity. Unfortunately, it is not possible to extract the loss in ligand conformational entropy from our calorimetric data, since calorimetric estimates of ΔS include contributions from the displacement of water.

thumbnail

Figure 4. The packing density/affinity relationship for barbiturates is offset from that of the propofol-like compounds, interpreted here as the addition of an entropic penalty offset by new enthalpic gains.

Shown is the relationship between packing volume (fraction of cavity volume occupied by ligand) and affinity (dissociation constant, Kd) for apoferritin. The filled triangles represent a series of propofol analogs, for which a linear dependence of affinity upon packing density has been documented [21]. The open circles represent the barbiturates (P, pentobarbital; T, thiopental).

doi:10.1371/journal.pone.0032070.g004

We caution that understanding why a particular anesthetic binds with high affinity to a given target will not necessarily provide insights into general anesthesia, since anesthetic side effects are presumably also mediated by interactions with protein targets, some of which may occur with high affinity. However, the side-effect profiles of currently-used anesthetics vary considerably, suggesting that, unlike anesthetics' clinically useful effects, side effects tend to derive from chemotype-specific interactions. Therefore, targets that recognize many different anesthetic chemotypes are likely to reveal binding properties that are relevant to the production of the anesthetized state.

In summary, we present the first structures of barbiturates bound to a specific protein target. They add support to the notion that direct protein interactions subserve anesthetic effects. Further, these data emphasize that apoferritin is a unitary anesthetic binder, capable of accommodating different general anesthetic chemotypes. Its binding site contains a three-dimensional distribution of amphipathic features that allow recognition of a diverse collection of anesthetic ligands with remarkably high, and clinically relevant, affinity. Thus, it would seem that the apoferritin site can be considered a prototypical anesthetic binding site, and used for purposes as diverse as database mining or screening of novel anesthetic candidates.

Materials and Methods

Materials

Apoferritin, thiopental, pentobarbital, and phenobarbital were purchased from Sigma-Aldrich (St. Louis, MO, USA). Optical isomers of thiopental were isolated using a Nucleodex Beta-PM chiral column (10×250 mm; 5 µm pore size), using a mobile phase of 40% acetonitrile in 1.0% triethylammonium acetate, pH 4 and a flow rate of 0.6 mL/min.

Isothermal titration calorimetry

ITC measurements were carried out essentially as previously described [20], using a MicroCal VP-ITC instrument (Northampton, MA). The sample cell (1.43 mL) contained 10 µM apoferritin 24-mer that had been dialyzed overnight against 20 mM NaHPO4 pH 7.0 containing 130 mM NaCl. The reference cell contained water. Ligands were dissolved in the dialysate, to a final concentration of 0.45–1.6 mM, and filtered through 0.2 µm PTFE syringe filters. The titration volumes were 12 µL for the first injection, followed by 14 µL each for the subsequent injections. Sequential titrations were performed until the heat change was essentially constant. Sequential titrations were linked using ConCat32 software (Microcal, Inc.), and corrections were applied for heat changes due to buffer-buffer, buffer-protein, and ligand-buffer dilutions. Representative ITC traces are shown in Figure S5.

Protein crystallization and data collection

Apoferritin was purified by gel filtration chromatography with 0.2 M NaOAc, pH 5.0 as the mobile phase, and concentrated to a final concentration of 12 mg/mL for co-crystallization with thiopental. For co-crystallization with pentobarbital, apoferritin from Sigma was diluted with deionized water to a final concentration of 12 mg/mL. 1–2 µL of reservoir solution containing 0.2–1.6 M (NH4)2SO4 and 0.1–0.275 M CdSO4 were mixed with equal volumes of apoferritin solution and equilibrated over 0.7–1 mL reservoir solution at 18°C. Thiopental (0.5 mM) was dissolved directly in the reservoir solutions prior to crystallization trials, while pentobarbital (1–3 mM) was added to the protein solution and incubated for 30 min prior to crystallization trials. All solutions were pre-filtered through a 0.2 µm filter. Crystals appeared within 1–2 weeks and grew to a final size of 200–300 µm. Single crystals with well-defined edges were cryoprotected using reservoir solution containing 0.5–3 mM ligand and 30% glycerol and flash-cooled in liquid nitrogen for data collection. Diffraction data were collected at beamline X6A of the National Synchrotron Light Source, and integrated using d*TREK [31].

Structure determination

Molecular replacement was carried using a poly-alanine search molecule derived from the unliganded apoferritin structure, with all water molecules and metal ions removed; both the thiopental and pentobarbital complex structures were determined using the PHASER molecular replacement program [32]. Initial 2FO-FC and FO-FC electron density maps showed features corresponding to side chains, water molecules, and metal ions, as well as the barbiturate compounds bound in the anesthetic binding site. The structures were refined by iteratively cycling between manual rebuilding and automated refinement. Atomic coordinates of side chains, water molecules and cadmium ions were built into 2FO-FC electron density maps using COOT [33]. The atomic positions, temperature factors and occupancies were refined using PHENIX [34] and REFMAC [35]. Towards the end of the refinement the barbiturate compounds were built into electron density at the anesthetic binding site. The electron density for both structures indicated the presence of two optical isomers, which were incorporated into the models. The quality of phase information was assessed by generating omit maps with PHENIX and SFCHECK [36], and stereochemistry was validated using PROCHECK [37] and the validation tools within COOT. Commercially available apoferritin is a mixture of heavy and light chains, in an approximate mole ratio of 1:6; only the light chain can be observed in the electron density map, as has previously been demonstrated [38]. Coordinates and structure factors have been deposited with the PDB (thiopental, PDB ID 3RD0; pentobarbital, PDB ID 3RAV).

Structure analysis

Anesthetic binding pocket volumes were calculated as described ([21]; Text S1; Figures S1 and S2) using VOIDOO [39] and standard values for atomic radii [40]. Ligand volumes were obtained by minimizing ligand structures with PHENIX [34], after which the volume of the energy-minimized ligand structure was calculated using VOIDOO.

Supporting Information

Figure S1.

Calculated cavity volume versus VOIDOO iteration, for two apoferritin structures. In early cycles, where the grid used to calculate volume is coarse, the determined cavity volumes are underestimated. With increasing iterations the grid becomes finer and detected cavity volume increases and eventually converges. The small diamonds represent ten random orientations of the unliganded apoferritin structure (PDB ID 3F32); the crosses represent ten random orientations of the pentobarbital structure. The curves represent gnuplot fits of equation (1) to the data (see Text S1). The arrows indicate periods of local decline, which may cause the VOIDOO program to terminate prematurely.

doi:10.1371/journal.pone.0032070.s001

(TIF)

Figure S2.

Comparison of two methods for determining apoferritin cavity volume. The crosses represent volumes calculated by choosing ten random orientations of the molecule, allowing VOIDOO to run until program termination, and averaging the volumes generated for each orientation. The squares represent volumes calculated from v(n) curves fitted to the VOIDOO output, using n = 25 (see Text S1). The overall trend is maintained for the two methods, but volumes calculated by averaging cavity volumes reported after program termination were in all cases smaller than volumes calculated by curve fitting. PDB ID codes of apoferritin-anesthetic complexes contributing to this figure: 3F32, unliganded; 1XZ1, halothane; 1XZ3, isoflurane; 3F33, propofol; 3RD0, thiopental; 3RAV, pentobarbital; 3F34 & 3F35, 2,6-diethyl phenol; 3F36, 2-isopropyl phenol; 3F37 & 3F38, 2,6-dimethyl phenol; 3F39, phenol.

doi:10.1371/journal.pone.0032070.s002

(TIF)

Figure S3.

Stereo diagrams showing the hydrophobic anesthetic binding cavity of apoferritin bound to diverse general anesthetics. Pentobarbital is shown in both images, to allow direct comparison. The molecular surface of the cavity is shown as a semi-transparent tan surface that partially obscures Leu-24. A) The pentobarbital-apoferritin complex; both optical isomers are shown in this panel, in yellow and cyan. (In subsequent panels, only the more abundant isomer of pentobarbital is shown, for the sake of clarity). B) An overlay of propofol (yellow, PDB entry 3F33) and pentobarbital (cyan).

doi:10.1371/journal.pone.0032070.s003

(TIF)

Figure S4.

Stereo diagrams showing the hydrophobic anesthetic binding cavity of apoferritin bound to diverse general anesthetics (continued from Figure S3). Pentobarbital is included in both images, to allow direct comparison. The molecular surface of the cavity is shown as a semi-transparent tan surface that partially obscures Leu-24. A) Overlay of halothane (yellow) and pentobarbital (cyan). B) Overlay of isoflurane (yellow) and pentobarbital (cyan).

doi:10.1371/journal.pone.0032070.s004

(TIF)

Figure S5.

Representative ITC traces for the binding of barbiturates to apoferritin. Panel A, thiopental; panel B, pentobarbital; panel C, phenobarbital.

doi:10.1371/journal.pone.0032070.s005

(TIF)

Table S1.

Apoferritin binding affinities of the optical isomers of thiopental.

doi:10.1371/journal.pone.0032070.s006

(DOC)

Text S1.

Details of cavity volume calculations, and a comparison of how different general anesthetics to the common apoferritin pharmacophore.

doi:10.1371/journal.pone.0032070.s007

(DOC)

Acknowledgments

We thank the staff of beam line X6A of the National Synchrotron Light Source (NSLS), which is supported by the National Institute of General Medical Sciences, National Institutes of Health. The NSLS at Brookhaven National Laboratory is supported by the U.S. Department of Energy.

Author Contributions

Conceived and designed the experiments: SO LSV RL RGE PJL. Performed the experiments: SO LSV WB QCM JX PJL. Analyzed the data: SO JX RGE PJL. Wrote the paper: SO RGE PJL.

References

  1. 1. Eckenhoff RG (2001) Promiscuous ligands and attractive cavities: How do the inhaled anesthetics work? Mol Interventions 1: 258–268.
  2. 2. Nirthanan S, Garcia G 3rd, Chiara DC, Husain SS, Cohen JB (2008) Identification of binding sites in the nicotinic acetylcholine receptor for TDBzl-etomidate, a photoreactive positive allosteric effector. J Biol Chem 283: 22051–22062.
  3. 3. Franks NP (2008) General anesthesia: From molecular targets to neuronal pathways of sleep and arousal. Nature Reviews Neuroscience 9: 370–386.
  4. 4. Lazarenko RM, Willcox SC, Shu S, Berg AP, Jevtovic-Todorovic V, et al. (2010) Motoneuronal TASK channels contribute to immobilizing effects of inhalational general anesthetics. J Neurosci 30: 7691–7704.
  5. 5. Falk MJ, Kayser EB, Morgan PG, Sedensky MM (2006) Mitochondrial complex I function modulates volatile anesthetic sensitivity in C. elegans. Curr Biol 16: 1641–1645.
  6. 6. Bali M, Jansen M, Akabas MH (2009) GABA-induced intersubunit conformational movement in the GABAA receptor alpha 1M1-beta 2M3 transmembrane subunit interface: experimental basis for homology modeling of an intravenous anesthetic binding site. J Neurosci 29: 3083–3092.
  7. 7. Chang CS, Olcese R, Olsen RW (2003) A single M1 residue in the β2 subunit alters channel gating of GABAA receptor in anesthetic modulation and direct activation. J Biol Chem 278: 42821–42828.
  8. 8. Jenkins A, Andreasen A, Trudell JR, Harrison NL (2002) Tryptophan scanning mutagenesis in TM4 of the GABAA receptor α1 subunit: implications for modulation by inhaled anesthetics and ion channel structure. Neuropharm 43: 669–678.
  9. 9. Jurd R, Arras M, Sachar L, Drexler B, Siegwart R, et al. (2003) General anesthetic actions in vivo strongly attenuated by a point mutation in the GABAA receptor β3 subunit. FASEB J 17: 250–252.
  10. 10. Krasowski MD, Nishikawa K, Nikolaeva N, Lin A, Harrison NL (2001) Methionine 286 in transmembrane domain 3 of the GABAA receptor β subunit controls a binding cavity for propofol and other alkylphenol general anesthetics. Neuropharm 41: 952–964.
  11. 11. Li G-D, Chiara DC, Sawyer GW, Husain SS, Olsen RW, et al. (2006) Identification of a GABAA receptor anesthetic binding site at subunit interfaces by photolabeling with an etomidate analog. J Neurosci 26: 11599–11605.
  12. 12. Olsen RW, Li GD (2011) GABA(A) receptors as molecular targets of general anesthetics: identification of binding sites provides clues to allosteric modulation. Can J Anaesth 58: 206–215.
  13. 13. Schofield CM, Harrison NL (2005) Transmembrane residues define the action of isoflurane at the GABAA receptor alpha-3 subunit. Brain Res 1032: 30–35.
  14. 14. Lee JK, Stroud RM (2011) Unlocking the eukaryotic membrane protein structural proteome. Curr Opin Struct Biol 20: 464–470.
  15. 15. Bhattacharya AA, Curry S, Franks NP (2000) Binding of the general anesthetics propofol and halothane to human serum albumin. High resolution crystal structures. Journal of Biological Chemistry 275: 38731–38738.
  16. 16. Franks NP, Lieb WR (1984) Do general anaesthetics act by competitive binding to specific receptors? Nature 310: 599–601.
  17. 17. Ma D, Brandon NR, Cui T, Bondarenko V, Canlas C, et al. (2008) Four-alpha-helix bundle with designed anesthetic binding pockets. Part I: structural and dynamical analyses. Biophys J 94: 4454–4463.
  18. 18. Weng Y, Yang L, Corringer PJ, Sonner JM (2010) Anesthetic sensitivity of the Gloeobacter violaceus proton-gated ion channel. Anesth Analg 110: 59–63.
  19. 19. Nury H, Van Renterghem C, Weng Y, Tran A, Baaden M, et al. (2011) X-ray structures of general anaesthetics bound to a pentameric ligand-gated ion channel. Nature 469: 428–431.
  20. 20. Liu R, Loll PJ, Eckenhoff RG (2005) Structural basis for high-affinity volatile anesthetic binding in a natural 4-helix bundle protein. FASEB J 19: 567–576.
  21. 21. Vedula LS, Brannigan G, Economou NJ, Xi J, Hall MA, et al. (2009) A unitary anesthetic binding site at high resolution. J Biol Chem 284: 24176–24184.
  22. 22. Krasowski MD, Hong X, Hopfinger AJ, Harrison NL (2002) 4D-QSAR analysis of a set of propofol analogues: mapping binding sites for an anesthetic phenol on the GABAA receptor. J Med Chem 45: 3210–3221.
  23. 23. Butts CA, Xi J, Brannigan G, Saad AA, Venkatachalan SP, et al. (2009) Identification of a fluorescent general anesthetic, 1-aminoanthracene. Proc Natl Acad Sci U S A 106(16): 6501–6506.
  24. 24. Lopez-Munoz F, Ucha-Udabe R, Alamo C (2005) The history of barbiturates a century after their clinical introduction. Neuropsychiatr Dis Treat 1: 329–343.
  25. 25. Andrews PR, Mark LC (1982) Structural specificity of barbiturates and related drugs. Anesthesiology 57: 314–320.
  26. 26. Baker EN, Hubbard RE (1984) Hydrogen-Bonding in Globular-Proteins. Progress in Biophysics & Molecular Biology 44: 97–179.
  27. 27. Bocquet N, Nury H, Baaden M, Le Poupon C, Changeux JP, et al. (2009) X-ray structure of a pentameric ligand-gated ion channel in an apparently open conformation. Nature 457: 111–114.
  28. 28. Bertaccini EJ, Trudell JR, Franks NP (2007) The common chemical motifs within anesthetic binding sites. Anesth Analg 104: 318–324.
  29. 29. Sandorfy C (2004) Weak intermolecular associations and anesthesia. Anesthesiology 101: 1225–1227.
  30. 30. Mecozzi S, Rebek J Jr (1998) The 55% solution: a formula for molecular recognition in the liquid state. Chem Eur J 4: 1016–1022.
  31. 31. Pflugrath JW (1999) The finer things in X-ray diffraction data collection. Acta Crystallogr D Biol Crystallogr D55: 1718–1725.
  32. 32. McCoy AJ, Grosse-Kunstleve RW, Adams PD, Winn MD, Storoni LC, et al. (2007) Phaser crystallographic software. J Appl Crystallogr 40: 658–674.
  33. 33. Emsley P, Lohkamp B, Scott WG, Cowtan K (2010) Features and development of Coot. Acta Crystallogr D Biol Crystallogr 66: 486–501.
  34. 34. Adams PD, Afonine PV, Bunkoczi G, Chen VB, Davis IW, et al. (2010) PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr D Biol Crystallogr 66: 213–221.
  35. 35. Murshudov GN, Vagin AA, Dodson EJ (1997) Refinement of macromolecular structures by the maximum-likelihood method. Acta Crystallogr D Biol Crystallogr 53: 240–255.
  36. 36. Vaguine AA, Richelle J, Wodak SJ (1999) SFCHECK: a unified set of procedures for evaluating the quality of macromolecular structure-factor data and their agreement with the atomic model. Acta Crystallogr D Biol Crystallogr 55: 191–205.
  37. 37. Laskowski RA, Macarthur MW, Moss DS, Thornton JM (1993) Procheck - a Program to Check the Stereochemical Quality of Protein Structures. Journal of Applied Crystallography 26: 283–291.
  38. 38. Granier T, Gallois B, Dautant A, d'Estaintot BL, Precigoux G (1997) Comparison of the structures of the cubic and tetragonal forms of horse-spleen apoferritin. Acta Crystallogr D Biol Crystallogr D53: 580–587.
  39. 39. Kleywegt GJ, Jones TA (1994) Detection, delineation, measurement and display of cavities in macromolecular structures. Acta Crystallogr D Biol Crystallogr 50: 178–185.
  40. 40. Pontius J, Richelle J, Wodak SJ (1996) Deviations from standard atomic volumes as a quality measure for protein crystal structures. J Mol Biol 264: 121–136.
  41. 41. Dingemanse J, Hameter BM, Danhof M (1990) Pharmacodynamics of tolerance development to the anesthetic and anticonvulsant effects of phenobarbital in rats. J Pharm Sci 79: 207–211.
  42. 42. Tomlin SL, Jenkins A, Lieb WR, Franks NP (1999) Preparation of barbiturate optical isomers and their effects on GABA(A) receptors. Anesthesiology 90: 1714–1722.
  43. 43. Yakushiji T, Oyama Y, Akaike N (1989) Comparative study on barbiturates using isolated single neurons: GABA-mimetic action and augmentatory action on GABA response. Brain Res 488: 357–360.
  44. 44. Rho JM, Donevan SD, Rogawski MA (1996) Direct activation of GABAA receptors by barbiturates in cultured rat hippocampal neurons. J Physiol 497(Pt 2): 509–522.
  45. 45. Cheng T, Zhao Y, Li X, Lin F, Xu Y, et al. (2007) Computation of octanol-water partition coefficients by guiding an additive model with knowledge. J Chem Inf Model 47: 2140–2148.