Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

Characterization of a Group of MITEs with Unusual Features from Two Coral Genomes

  • Shi Wang ,

    swang@mail.utexas.edu

    Affiliations Section of Integrative Biology, University of Texas at Austin, Austin, Texas, United States of America, Waggoner Center for Alcohol and Addiction Research, University of Texas at Austin, Austin, Texas, United States of America

  • Lingling Zhang,

    Affiliation Waggoner Center for Alcohol and Addiction Research, University of Texas at Austin, Austin, Texas, United States of America

  • Eli Meyer,

    Affiliation Section of Integrative Biology, University of Texas at Austin, Austin, Texas, United States of America

  • Mikhail V. Matz

    Affiliation Section of Integrative Biology, University of Texas at Austin, Austin, Texas, United States of America

Abstract

Background

Miniature inverted-repeat transposable elements (MITEs), which are common in eukaryotic genomes, are small non-coding elements that transpose by utilizing transposases encoded by autonomous transposons. Recent genome-wide analyses and cross-mobilization assays have greatly improved our knowledge on MITE proliferation, however, specific mechanisms for the origin and evolution of MITEs are still unclear.

Principal Findings

A group of coral MITEs called CMITE were identified from two corals, Acropora millepora and Acropora palmata. CMITEs conform to many common characteristics of MITEs, but also present several unusual features. The most unusual feature of CMITEs is conservation of the internal region, which is more conserved between MITE families than the TIRs. The origin of this internal region remains unknown, although we found one CMITE family that seems to be derived from a piggyBac-like transposon in A. millepora. CMITEs can form tandem arrays, suggesting an unconventional way for MITEs to increase copy numbers. We also describe a case in which a novel transposable element was created by a CMITE insertion event.

Conclusions

To our knowledge, this is the first report of identification of MITEs from coral genomes. Proliferation of CMITEs seems to be related to the transposition machinery of piggyBac-like autonomous transposons. The highly conserved internal region of CMITEs suggests a potential role for this region in their successful transposition. However, the origin of these unusual features in CMITEs remains unclear, and thus represents an intriguing topic for future investigations.

Introduction

Transposable elements (TEs) are prevalent in the genomes of all animals and plants, and are often thought of as selfish or parasitic elements [1]. The relationship between TEs and their hosts has been described as an arms race, with the TEs trying to increase their copy number in the host genome and the host trying to protect the integrity of its genetic content [2]. This arms race can lead to enhanced genome plasticity and thus drive host genome evolution (for recent reviews, see [2], [3]).

Eukaryotic TEs can be divided into two major classes, retrotransposons (class I) and DNA transposons (class II), on the basis of the presence or absence of RNA as a transposition intermediate [4]. With few exceptions, classic “cut-and-paste” DNA transposons have terminal inverted repeats (TIRs) at both ends and transpose using the so-called “cut-and-paste” mechanism (for a review, see [5]). Some DNA transposons are autonomous, encoding their own transposases, while others are nonautonomous. Nonautonomous DNA transposons maintain transposition activity by retaining the cis sequences (e.g. TIRs or in some cases, subterminal repeated sequences) recognized by trans transposases from autonomous DNA transposons.

Miniature inverted-repeat transposable elements (MITEs) are a special class of nonautonomous DNA transposons that can transpose by “borrowing” the transposition machinery of autonomous DNA transposons with similar TIR signals [6][9]. MITEs have a suite of well known characteristics such as small size (usually less than 500 bp), conserved TIRs, and the absence of protein-coding sequences [10]. In contrast to typical nonautonomous DNA transposons, MITEs are highly homogeneous in size and are usually present in genomes in very high copy numbers. Because MITEs do not encode transposases, their classification is mainly based on shared TIR and target site duplication (TSD) sequences. To date, most MITEs can be classified into seven superfamilies that include Tc1/mariner (Stowaway-like MITEs), PIF/Harbinger (Tourist-like MITEs), piggyBac/TTAA and hAT [10]. Although recent genome-wide analyses and cross-mobilization assays have greatly improved our knowledge on MITE proliferation [8], [9], [11][14], specific mechanisms for the origin and evolution of MITEs are still unclear.

Here, we present the first report of a group of coral MITEs called CMITE, which were identified from whole-genome shotgun (WGS) sequences of two coral species, Acropora millepora and Acropora palmata. Although CMITEs conform to many common characteristics of MITEs, they also present the following unusual features: (i) highly conserved internal region but less conserved TIRs, (ii) formation of tandem arrays, and (iii) de novo assembly of a novel TE.

Materials and Methods

Sequences

WGS sequences of A. millepora and A. palmata were downloaded from the National Center for Biotechnology Information (NCBI) database. There were 14625 and 11024 entries for A. millepora and A. palmata, respectively.

Bioinformatic analysis of CMITE elements

CMITEs with matching TIRs (13∼14 bp in length) were first identified using the FINDMITE program [15]. In order to search for possible related elements, a 60 bp consensus sequence (5′-AGGGGTTCCCCATTGACGAGTAAAATCGTCTGGCGTTAGACAGAGTAAAATCTATAAGTG-3′) from the internal conserved region of CMITEs was used for blastn search [16]. A cutoff value of e ≤10−5 was used as the significance threshold for the comparison.

Multiple sequence alignment was performed using the MegAlign program (part of the DNASTAR software package) and sequence alignments were manually refined. A formula was adopted to estimate the copy number of CMITEs in the genome: copy number  =  (number in database × genome size)/database size [15]. This calculation was only possible for A. millepora, since there is a previously published estimate of 200 Mbp for this genome size [17].

Isolation of piggyBac-like transposons from A. millepora genome

Using piggyBac-like elements from RepBase 13.05 (n = 73, [18]) as queries (tblastx, e≤10−4), we identified 14 distinct A. millepora piggyBac-like sequences. Eleven of them came from the A. millepora larval transcriptome (NCBI ID: SRA003728, [19]), and 3 came from the WGS sequences.

Two approaches were used to isolate piggyBac-like transposons from A. millepora genome. In the first approach (direct PCR), polymerase chain reaction (PCR) primers were designed based on the TIR sequences of CMITE family I, II and III in an effort to isolate MITE family-specific piggyBac-like transposons. PCR amplifications were set up in a 20 µL volume composed of 10 ng A. millepora genomic DNA, 0.5 µM each primer, 0.2 mM dNTP, 1× Phusion HF buffer and 0.4 U Phusion hot start high-fidelity DNA polymerase (NEB, Ipswich, MA) in a DNA Engine Tetrad 2 thermal cycler (Bio-Rad, Hercules, CA). All cycling began with an initial denaturation at 98°C for 30 s, followed by 35 cycles of 98°C for 10 s, 60°C for 30 s, 72°C for 5 min, and a final extension at 72°C for 10 min. PCR products were detected by agarose gel electrophoresis. PCR product containing fragments in the desired size range (i.e. 2–6 kb) was purified using QIAquick PCR purification kit (Qiagen, Valencia, CA). Because Phusion DNA polymerase generates blunt-end PCR products, 3′ A overhangs must be added to the blunt PCR product before TA cloning. The A-addition reaction was set up in a 10 µL volume composed of ∼200 ng purified PCR product, 0.2 mM dATP, 1× ThermoPol buffer and 1 U Taq DNA polymerase (NEB, Ipswich, MA), and incubated at 72°C for 30 min. After treatment, PCR products were ligated into pGEM-T vector (Promega, Madison, WI) and subsequently transformed into TOP10 competent Escherichia coli cells (Invitrogen, Carlsbad, CA). Recombinant clones were screened for inserts of correct size, and then were sequenced at the DNA Core Facility at UT Austin. In this approach, the exact TIR sequences of a piggyBac-like element remain unknown since the TIR region of this element serves as a primer-binding site. An adaptor-ligation PCR method [20] was utilized to obtain the TIR sequences of a given piggyBac-like element. To prepare the adaptor-ligated DNA, 200 ng of A. millepora genomic DNA was digested with 5 U MseI (NEB, Ipswich, MA) at 37°C for 3 h. The reaction was inactivated at 65°C for 20 min. A ligation solution containing 50 pMol MseI-adapter (5′ CAGCAGACTTGAGGTCGTGGTGCTGAGTGCAGTG 3′ and 5′ TACACTGCACTCAGC-NH2 3′), 200 U T4 DNA ligase (NEB, Ipswich, MA) and 1 mM ATP (NEB, Ipswich, MA) was added, and the resultant solution was incubated at 16°C for 16 h. PCR amplifications were set up in a 20 µL volume composed of 10 ng adaptor-ligated DNA, 0.1 µM adaptor-specific primer (5′ GCCTTGCCAGCCCGCTTGTCAGCAGACTTGAGGTCGTGGT 3′), 0.1 µM transposon-specific upstream or downstream primer, 0.2 mM dNTP, 1× Advantage 2 PCR buffer and 1× Advantage 2 Polymerase Mix (Clontech, Mountain View, CA). All cycling began with an initial denaturation at 94°C for 5 min, followed by 35 cycles of 94°C for 30 s, 60°C for 30 s, 68°C for 30 s, and a final extension at 68°C for 10 min. PCR products were then cloned and sequenced as described above.

In the second approach, inverse PCR was utilized in an effort to isolate full piggyBac-like transposons based on the 14 A. millepora piggyBac-like sequences. A 600-ng aliquot of A. millepora genomic DNA was digested with 5 U NcoI, BglII and BamHI (NEB, Ipswich, MA) respectively at 37°C for 3 h. Digested DNA was purified using QIAquick PCR purification kit (Qiagen, Valencia, CA), and was self-circularized in a final volume of 300 µL using T4 DNA liagse (NEB, Ipswich, MA) at 16°C for 16 h. After purification, ∼10 ng of ligated DNA was used for PCR amplification. PCR amplification, TA cloning and sequencing were followed the same procedure in the direct PCR approach. Primers used in the two approaches were designed based on several principles as described by Matz [21] so that all PCR amplifications could be achieved at the same annealing temperature.

Phylogenetic analysis of A. millepora piggyBac-like transposons

Transposase protein sequences were aligned using the ClustalW method [22]. The protein sequence alignment is available in the Supplementary Dataset S1. Phylogenetic analysis was performed with the program MrBayes 3.1 [23]. The appropriate model of evolution was identified as WAG+G+I [24] using the MCMC model-jumping method. The MCMC chain was run for 1,000,000 generations with a sample frequency of 200. In total, 5000 trees were produced, of which the first 4500 were discarded as burn-in while summarizing the data.

Results

Discovery and characterization of CMITE families

When searching for MITEs in the WGS sequences of A. millepora, our attention was quickly turned to several predicted MITEs (which we later called CMITE), which had different TIRs but shared highly conserved sequences in their internal region. Using the FINDMITE program [15], eight CMITE elements with matching TIRs (13∼14 bp in length) were initially identified in the WGS sequences of A. millepora and A. palmata. These CMITEs showed many of the characteristic features of MITEs. They were small (about 100 bp) and homogeneous in size. They had TIRs and were flanked by TTAA TSDs. In contrast to most other MITEs, however, the 75-base-long internal region of CMITEs was remarkably well conserved across CMITE families (Fig. 1). Based on the similarity of their TIRs, eight CMITE elements can be classified into three families (family I, II and III) (Table 1), which is also correlated with the variations in their internal regions, except for one case: AP824033492 had a family II-like internal region.

thumbnail
Figure 1. Sequence alignment of CMITE elements from two coral species.

CMITE elements are named with initial capitals of species name (AM: Acropora millepora; AP: Acropora palmata) followed by an accession number. Consensus sequence is shown at the top of alignment. The terminal inverted repeat (TIR) and the conserved internal region are indicated by double arrows. Bases different from consensus sequence are shaded. FAI to FAVI represents family I to family VI.

https://doi.org/10.1371/journal.pone.0010700.g001

thumbnail
Table 1. Characteristics of CMITE families in two coral species.

https://doi.org/10.1371/journal.pone.0010700.t001

To identify possible related elements, we used a 60 bp consensus sequence from the most invariant part of the internal region as a query in blastn search against the WGS sequences of A. millepora and A. palmata. This search identified 88 significant hits from 78 different A. millepora WGS entries, and 111 from 94 different A. palmata WGS entries. Multiple matches were found in 7 and 12 WGS entries of A. millepora and A. palmata, respectively. These searches identified an additional 56 full copies of CMITEs from A. millepora, and 73 from A. palmata. Sequence analysis revealed that in comparison to CMITEs from families I, II, and III, all these elements had “shorter” TIRs in which the outermost regions matched their “partners” more closely than the innermost regions (Fig. 1). Since the FINDMITE program was mainly designed to identify MITEs with long and matching TIRs, this explained why most CMITEs had not been initially identified by that program. Based on the similarity of their TIRs, 113 of these elements (53 from A. millepora and 60 A. palmata) were classified into three additional families: families IV, V and VI (Table 1). Two of the remaining copies appeared to be degenerated copies of family III elements, and the other 14 were too degenerated to be unambiguously assigned to one of these families. Family IV was the largest of these families, outnumbering the others by a factor of two in A. palmata and almost by a factor of seven in A. millepora (Table 1). Within each family, there was no characteristic sequence difference between A. millepora and A. palmata elements, indicating that these families diverged prior to the coral species separation. Based on their observed frequency in A. millepora WGS sequences and the estimated genome size, we estimate the total number of CMITEs in the A. millepora genome at about 1600 copies. To further check for possible related elements in other species, we used the same query sequence to blast against the NCBI nr database, the Repbase database [18], and the WGS database for another coral species, Porites lobata. However, only one significant hit was found in the nr database, a partial lactate dehydrogenase (LDH)-like gene sequence (GenBank ID: EU814629) from A. millepora. A full copy of the CMITE element was located in the presumed intron region of this gene (data not shown).

An indication of a past transposition event of a CMITE was observed among A. millepora sequences, where we found two alleles of the same locus, one without a CMITE and another with the CMITE including the characteristic TSD, TTAA (Fig. 2a).

thumbnail
Figure 2. Past mobility, similarity to a piggyBac-like transposon, and other features of CMITEs.

(a) Evidence of past mobility of a CMITE element. TSD indicates target site duplication. TIR is represented by a triangle. (b) Sequence comparison between a member of CMITE family I and a piggyBac-like transposon, AmiPB1. Only partial sequences in the internal region adjacent to TIRs are shown. (c) Two representative tandem CMITE arrays. (d) Assembly of a CMITE-IN element by CMITE insertion (top) and evidence of an excision of a CMITE-IN element (bottom). DR indicates direct repeat.

https://doi.org/10.1371/journal.pone.0010700.g002

Relationship of CMITEs and piggyBac-like transposons

One of the characteristics of CMITEs is the TTAA target site duplication (TSD). To date, only one MITE superfamily, piggyBac/TTAA was known to be able to generate TTAA TSDs [10]. This MITE superfamily was supposed to be dependent upon a superfamily of DNA transposon called piggyBac. Elements in the piggyBac superfamily generally have 12–19 bp TIRs containing a “CC[C/T]T” terminal motif, and generate TTAA TSDs [5]. All the CMITEs we initially identified were consistent with these hallmarks of piggyBac transposons. When searched against the RepBase database [18], piggyBac-like sequences were also found in the WGS databases of A. millepora and A. palmata, and a recently released A. millepora larval transcriptome [19].

In order to investigate the relationship between CMITEs and piggyBac-like transposons, we decided to isolate piggyBac-like transposons from the A. millepora genome. Through direct and inverse PCR approaches, six piggyBac-like elements were isolated from the A. millepora genome (Table 2), and full-length sequences were obtained for four of them. All full-length piggyBac-like elements contained the hallmarks of typical piggyBac transposons. Partial sequences were obtained for the rest, of which one element has one TIR and a complete open reading frame (ORF), and another one has a complete ORF. Five of these were found in the A. millepora larval transcriptome, the expression of these elements during development strongly suggests the presence of functional piggyBac-like elements in the A. millepora genome.

thumbnail
Table 2. Summary of six PiggyBac-like transposons in Acropora millepora.

https://doi.org/10.1371/journal.pone.0010700.t002

Phylogenetic analysis of AmiPB1-6 and other piggyBac-like elements revealed five major clades (Fig. 3). Clades I, II, III and IV correspond to previously identified clades [25]. Clade V is a new clade identified in this study. AmiPB1 to 6 are grouped in clade I, II and V, which suggests diverse origins of A. millepora piggyBac-like elements. Unexpectedly, AmiPB3 is grouped with NvePB1 from the sea anemone Nematostella vectensis rather than with other A. millepora elements in the same clade (Fig. 3, clade V). This may suggest that piggyBac clades diverged before the separation of the corresponding Cnidarian orders, Scleractinia and Actiniaria.

thumbnail
Figure 3. Phylogenetic relationships of AmiPB1-6 and other elements from the piggyBac superfamily based on a Bayesian analysis of transposase protein sequences.

A. millepora piggyBac-like elements are indicated with asterisks. The edges with posterior probability less than 0.95 are collapsed. Major clades (I-V) are denoted. Note, clade I, II, III and IV correspond to previously identified clades [25]. Species name abbreviations: Ami, Acropora millepora; Aga, Anopheles gambiae; Bmo, Bombyx mori; Cin, Ciona intestinalis; Has, Homo sapiens; Nve, Nematostella vectensis; Thi, Trichoplusia ni; Tru (including pigibaku), Takifugu rubripes; Xtr, Xenopus tropicalis. The sequences of NvePB1-3 are derived from Repbase [18] under the name piggyBac-1_NV, piggyBac-2_NV and piggyBac-3_NV, respectively. Other sequences are either derived from [25] or [38].

https://doi.org/10.1371/journal.pone.0010700.g003

AmiPB1 was the only element isolated through the direct PCR approach. AmiPB1 and CMITE family I share identical TIR sequences, as well as weak sequence similarity in the internal region adjacent to TIRs (Fig. 2b). This suggests that family I is possibly the derivative of AmiPB1, and could utilize AmiPB1 transposase to mobilize in the genome. However, there is no obvious sequence similarity between the most of internal regions of CMITE family I and AmiPB1. For other piggyBac-like elements, except the hallmark terminal TIR motif (i.e., CC[C/T]T), which is necessary for successful transposition of piggyBac transposons [26], [27], we did not observe any obvious sequence similarities between these elements and CMITE families.

Tandem CMITE arrays

As mentioned above, 7 A. millepora and 12 A. palmata WGS sequences contained more than one CMITE element. Unexpectedly, some of these CMITE elements were found in tandem arrays, which typical MITEs usually do not form. Fig. 2c shows two examples of tandem CMITE arrays, including one with gaps between the repeated elements. Within these tandem arrays, both the elements themselves and the sequences between them are highly similar, implying that array formation was probably driven by a replication slippage mechanism rather than by independent transposition.

Identification of the CMITE-IN family

We also identified a CMITE-related family of elements (which we named CMITE-IN) in both A. millepora and A. palmata WGS sequences. CMITE-IN element contains a full copy of the CMITE element flanked by direct repeats, and has TTAA at both ends (examples: AM745001823 and AP824035187 in Fig. 2d). Four CMITE-IN elements were identified in the A. millepora WGS sequences, and one in the A. palmata WGS sequences. We estimate there are ∼70 CMITE-IN copies in the A. millepora genome. A likely prototype of the CMITE-IN element was found in an A. palmata sequence (AP824030709, Fig. 2d), which contains two 23 bp direct repeats and has TTAA at both ends. The two direct repeats are separated by TTAA, which served as a target site for insertion of a CMITE element in the genome of another coral (Fig. 2d, top). The CMITE-IN element also seems to be a mobile element: we identified a pair of alleles from A. palmata, with and without CMITE-IN element, which suggest that the CMITE-IN can be excised at the position of its protoelement-derived TTAAs (Fig. 2d, bottom). We infer that the allele without the element (AP824033477) is a result of the past excision because it retains a possible TSD (Fig. 2d). Although piggyBac transposases usually perform precise excision without leaving “footprints” at the target sites [27], [28], imprecise excision events leaving TTAA TSDs in the target site were also observed [29]. In the case presented here, one of these TSDs has apparently mutated into ACAA, possibly as a result of imperfect repair of the double-strand break after transposon excision.

Discussion

To our knowledge, this is the first report of identification of MITEs from coral genomes. The CMITEs described here appear to have originated from piggyBac-like transposons. However, in comparison to other MITEs of the same origin [30][32], CMITEs have the following noteworthy features:

(i) Highly conserved internal region but less conserved TIRs

The most unusual feature of CMITEs is conservation of the internal region, which is more conserved between MITE families than the TIRs. Typically, internal regions of different MITE families are much more dissimilar in size and sequence [10]. In part, the conservation of the internal region in CMITEs may result from ascertainment bias, since the internal region was used as query to search for the majority of CMITEs. However, there was no such bias while initially detecting CMITEs using the FINDMITE program since it was based on TIR similarity only. It is tempting to speculate that the internal region is somehow important for CMITEs' transposition. Indeed, a recent study has shown that some internal sequences in MITEs could enhance transposition [9].

We showed that CMITE family I seems to be the derivative of a piggyBac-like transposon, AmiPB1. However, by comparison of CMITE family I and AmiPB1, we only observed very limited sequence similarity in the internal region adjacent to TIRs (Fig. 2b), and no obvious sequence similarity for the rest of internal region. Thus the origin of internal region of CMITEs remains a mystery. Interestingly, a recent study showed that host genomic sequences can be acquired by MITEs and filled in between TIRs through a process called transduplication [14]. This could be a reasonable explanation for the origin of internal region of CMITEs. However, the WGS sequences currently available did not include any likely candidates for this putative original sequence, so complete genome sequences (which are unfortunately not yet available for any coral) will likely be required to resolve whether transduplication played a role in these elements.

In contrast to the internal region, TIRs between CMITE families are usually less conserved. However, all CMITE families preserved the terminal TIR motif (i.e., CC[C/T]T) (Table 1), which is a hallmark of TIRs of piggyBac transposons [5], and is necessary for successful transposition of piggyBac transposons [26], [27], so it is possible that this TIR motif coupled with the conserved internal region is already sufficient for successful transposition of these CMITE families. If this is the case, it might allow for cross-mobilization of these MITEs by various kinds of piggyBac-like transposons (Fig. 3), since TIRs of piggyBac-like transposons we identified in the A. millepora genome also preserved this motif (Table 2).

(ii) Formation of tandem MITE arrays

Our observations indicate that CMITEs can increase their copy numbers not only by transposition, but also by forming tandem arrays. To our knowledge, this is the first report of tandem arrays of full-sized MITEs, although tandem arrays formed by partial internal sequence of a piggyBac-MITE have been observed [33]. Specific mechanisms responsible for the CMITEs array formation are unclear, but could be related to their similarity to the autonomous piggyBac transposons, which are also able to form large tandem arrays [34]. Even if it is the case, however, CMITEs seem to be the only piggyBac-derived MITEs that retain this ability. This suggests that CMITEs contain some unique features that facilitate the formation of tandem arrays.

(iii) De novo assembly of a novel TE

The finding of a novel TE family created by insertion of a CMITE suggests an unusual mechanism for the generation of novel TEs. Although we have shown the evidence of past mobility of the CMITE-IN element, the transposition mechanism remains unclear. CMITE-IN elements are structurally similar to miniature subterminal inverted-repeat transposable element (MSITE), which contain subterminal inverted-repeat (SIR) but no TIRs. Identification of MSITEs has been reported in several studies [35][37]. In one particular case, a 7 bp motif in the TIR of Wuneng (MITE) was found in the SIR of Microuli (MSITE) [37]. Interestingly, both Wuneng and Microuli can generate TTAA TSDs. Based on these observations, the authors proposed that SIR might play an important role in MSITE transposition by providing key motifs. Since CMITE-IN and MSITE share similar TE structure, we speculate that the transposition mechanism of CMITE-IN may be also very similar to that of MSITE.

In summary, we present the first report of non-autonomous MITE-like elements (CMITEs) from two coral genomes. These elements bear the telltale features of MITEs related to piggyBac-like autonomous transposons. We show that the coral genome indeed contains such autonomous transposons, most of which are also transcriptional active, ostensibly providing the transposition machinery for the CMITEs. The unusually well-conserved internal region of CMITEs suggests a potentially important role in successful transposition. However, the origin of these unusual features in CMITEs remains unclear, and represents an intriguing topic for future studies.

Supporting Information

Dataset S1.

AmiPB1-6 and other piggyBac-like transposase protein sequences (fasta and ‘aligned’ formats).

https://doi.org/10.1371/journal.pone.0010700.s001

(0.08 MB PDF)

Author Contributions

Conceived and designed the experiments: SW LZ. Performed the experiments: SW. Analyzed the data: SW LZ EM MVM. Wrote the paper: SW LZ EM MVM.

References

  1. 1. Orgel LE, Crick FHC (1980) Selfish DNA: the ultimate parasite. Nature 284: 604–607.
  2. 2. Wessler SR (2006) Eukaryotic transposable elements: teaching old genomes new tricks. In: Caporale L, editor. The Implicit Genome. pp. 138–165. Oxford University Press, NY.
  3. 3. Kazazian HH Jr (2004) Mobile elements: drivers of genome evolution. Science 303: 1626–1632.
  4. 4. Wicker T, Sabot F, Hua-Van A, Bennetzen JL, Capy P, et al. (2007) A unified classification system for eukaryotic transposable elements. Nature Rev 8: 973–982.
  5. 5. Feschotte C, Pritham EJ (2007) DNA transposons and the evolution of eukaryotic genomes. Annu Rev Genet 41: 331–368.
  6. 6. Dufresne M, Hua-Van A, Abd el Wahab H, Ben M'Barek S, Vasnier C, et al. (2007) Transposition of a fungal miniature inverted-repeat transposable element through the action of a Tc1-like transposase. Genetics 175: 441–452.
  7. 7. Yang G, Zhang F, Hancock CN, Wessler SR (2007) Transposition of the rice miniature inverted repeat transposable element mPing in Arabidopsis thaliana. Proc Natl Acad Sci USA 104: 10962–10967.
  8. 8. Bergemann M, Lespinet O, M'Barek SB, Daboussi M-J, Dufresne M (2008) Genome-wide analysis of the Fusarium oxysporum mimp family of MITEs and mobilization of both native and de novo created mimps. J Mol Evol 67: 631–642.
  9. 9. Yang G, Nagel DH, Feschotte C, Hancock CN, Wessler SR (2009) Tuned for transposition: Molecular determinants underlying the hyperactivity of a Stowaway MITE. Science 325: 1391–1394.
  10. 10. Feschotte C, Zhang X, Wessler SR (2002) Miniature inverted-repeat transposable elements and their relationship with established DNA transposons. In: Craig N, Craigie R, Gellert M, Lambowitz A, editors. Mobile DNA II. pp. 1147–1158. American Society of Microbiology Press, WA.
  11. 11. Santiago N, Herraiz C, Goni JR, Messeguer X, Casacuberta JM (2002) Genome-wide analysis of the Emigrant family of MITEs of Arabidopsis thaliana. Mol Biol Evol 19: 2285–2293.
  12. 12. Feschotte C, Swamy L, Wessler SR (2003) Genome-wide analysis of mariner-like transposable elements in rice reveals complex relationships with Stowaway MITEs. Genetics 163: 747–758.
  13. 13. Zhang X, Jiang N, Feschotte C, Wessler SR (2004) PIF- and Pong-like transposable elements: distribution, evolution and relationship with Tourist-like miniature inverted-repeat transposable elements. Genetics 166: 971–986.
  14. 14. Benjak A, Boue S, Forneck A, Casacuberta JM (2009) Recent amplification and impact of MITEs on the genome of grapevine (Vitis vinifera L.). Genome Biol Evol 2009: 75–84.
  15. 15. Tu Z (2001) Eight novel families of miniature inverted repeat transposable elements in the African malaria mosquito, Anopheles gambiae. Proc Natl Acad Sci USA 98: 1699–1704.
  16. 16. Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ (1990) Basic local alignment search tool. J Mol Biol 215: 403–410.
  17. 17. Foret S, Kassahn KS, Grasso LC, Hayward DC, Iguchi A, et al. (2007) Genomic and microarray approaches to coral reef conservation biology. Coral Reefs 26: 475–486.
  18. 18. Jurka J, Kapitonov VV, Pavlicek A, Klonowski P, Kohany O, et al. (2005) Repbase Update, a database of eukaryotic repetitive elements. Cytogenet Genome Res 110: 462–467.
  19. 19. Meyer E, Aglyamova GV, Wang S, Buchanan-Carter J, Abrego D, et al. (2009) Sequencing and de novo analysis of a coral larval transcriptome using 454 GS-Flx. BMC genomics 10: 219.
  20. 20. Siebert PD, Chenchik A, Kellogg DE, Lukyanov KA, Lukyanov SA (1995) An improved PCR method for walking in uncloned genomic DNA. Nucleic Acids Res 23: 1087–1088.
  21. 21. Matz MV (2003) Amplification of representative cDNA pools from microscopic amounts of animal tissue. Methods Mol Biol 221: 103–116.
  22. 22. Thompson JD, Higgins DG, Gibson TJ (1994) CLUSTAL W: improving the sensitivity of progressive multiple sequence alignment through sequence weighting, position-specific gap penalties and weigh matrix choice. Nucleic Acids Res 22: 4673–4680.
  23. 23. Huelsenbeck JP, Ronquist F (2001) MRBAYES: Bayesian inference of phylogenetic trees. Bioinformatics 17: 754–755.
  24. 24. Whelan S, Goldman N (2001) A general empirical model of protein evolution derived from multiple protein families using a maximum-likelihood approach. Mol Biol Evol 18: 691–699.
  25. 25. Sarkar A, Sim C, Hong YS, Hogan JR, Fraser MJ, et al. (2003) Molecular evolutionary analysis of the widespread piggyBac transposon family and related “domesticated” sequences. Mol Gen Genomics 270: 173–180.
  26. 26. Elick TA, Lobo N, Fraser MJ Jr (1997) Analysis of the cis-acting DNA elements required for piggyBac transposable element excision. Mol Gen Genet 255: 605–610.
  27. 27. Mitra R, Fain-Thornton J, Craig NL (2008) piggyBac can bypass DNA synthesis during cut and paste transposition. EMBO J 27: 1097–1109.
  28. 28. Elick TA, Bauser CA, Fraser MJ (1996) Excision of the piggyBac transposable element in vitro is a precise event that enhanced by the expression of its encoded transposase. Genetica 98: 33–41.
  29. 29. Wilson MH, Coates CJ, George AL Jr (2007) piggyBac transposon-mediated gene transfer in human cells. Mol Ther 15: 139–145.
  30. 30. Unsal K, Morgan GT (1995) A novel group of families of short interspersed repetitive elements (SINEs) in Xenopus: evidence of a specific target site for DNA-mediated transposition of inverted-repeat SINEs. J Mol Biol 248: 812–823.
  31. 31. Izsvak Z, Ivics Z, Shimoda N, Mohn D, Okamoto H, Hackett PB (1999) Short inverted-repeat transposable elements in teleost fish and implications for a mechanism of their amplification. J Mol Evol 48: 13–21.
  32. 32. Hikosaka A, Yokouchi E, Kawahara A (2000) Extensive amplification and transposition of a novel repetitive element, Xstir, together with its terminal inverted repeat in the evolution of Xenopus. J Mol Evol 51: 554–564.
  33. 33. Hikosaka A, Kawahara A (2004) Lineage-specific tandem repeats riding on a transposable element of MITE in Xenopus evolution: a new mechanism for creating simple sequence repeats. J Mol Evol 59: 738–746.
  34. 34. Adelman ZN, Jasinskiene N, Vally KJM, Peek P, Travanty EA, et al. (2004) Formation and loss of large, unstable tandem arrays of the piggyBac transposable element in the yellow fever mosquito, Aedes aegypti. Transgenic Res 13: 411–425.
  35. 35. Song WY, Pi LY, Bureau TE, Ronald PC (1998) Identification and characterization of 14 transposon-like elements in the noncoding regions of members of the Xa21 family of disease resistance genes in rice. Mol Gen Genet 258: 449–456.
  36. 36. Feschotte C, Mouches C (2000) Recent amplification of miniature inverted-repeat transposable elements in the vector mosquito Culex pipiens: characterization of the Mimo family. Gene 250: 109–116.
  37. 37. Tu Z, Orphanidis SP (2001) Microuli, a family of miniature subterminal inverted-repeat transposable elements (MSITEs): transposition without terminal inverted repeats. Mol Biol Evol 18: 893–895.
  38. 38. Hikosaka A, Kobayashi T, Saito Y, Kawahara A (2007) Evolution of the Xenopus piggyBac transposon family TxpB: domesticated and untamed strategies of transposon subfamilies. Mol Biol Evol 24: 2648–2656.