To predict gene expressions is an important endeavour within computational systems biology. It can both be a way to explore how drugs affect the system, as well as providing a framework for finding which genes are interrelated in a certain process. A practical problem, however, is how to assess and discriminate among the various algorithms which have been developed for this purpose. Therefore, the DREAM project invited the year 2008 to a challenge for predicting gene expression values, and here we present the algorithm with best performance.
We develop an algorithm by exploring various regression schemes with different model selection procedures. It turns out that the most effective scheme is based on least squares, with a penalty term of a recently developed form called the “elastic net”. Key components in the algorithm are the integration of expression data from other experimental conditions than those presented for the challenge and the utilization of transcription factor binding data for guiding the inference process towards known interactions. Of importance is also a cross-validation procedure where each form of external data is used only to the extent it increases the expected performance.
Our algorithm proves both the possibility to extract information from large-scale expression data concerning prediction of gene levels, as well as the benefits of integrating different data sources for improving the inference. We believe the former is an important message to those still hesitating on the possibilities for computational approaches, while the latter is part of an important way forward for the future development of the field of computational systems biology.
Citation: Gustafsson M, Hörnquist M (2010) Gene Expression Prediction by Soft Integration and the Elastic Net—Best Performance of the DREAM3 Gene Expression Challenge. PLoS ONE 5(2): e9134. doi:10.1371/journal.pone.0009134
Editor: Mark Isalan, Center for Genomic Regulation, Spain
Received: August 11, 2009; Accepted: October 6, 2009; Published: February 16, 2010
Copyright: © 2010 Gustafsson, Hörnquist. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This work was funded by Center for Industrial Information Technology at Linkoping University (http://www.isy.liu.se/ceniit/) under grant number 03.02. The funder had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
The massive growth of high throughput data within molecular biology during the last decade has sparked an interest in systems biology and generated a great variety of suggestions on how to infer knowledge from these data sets. That is, whether the data belong to the genomics, transcriptomics, proteomics or metabolomics domain, they still need to be structured before one can learn anything from them. Here, networks have proved to be a unifying language for different biological systems involving, genes, proteins, metabolites and also small molecules. These networks, defined by protein-protein, protein-to-gene, metabolic interactions etc., determine cellular responses to input signals and govern cellular dynamics . Still, though, the relative benefits of the proposed structuring methods are unclear, in part since researchers mainly publish positive merits benchmarked on their own data sets. Therefore, it was very welcome when the DREAM (Dialogue on Reverse Engineering Assessment and Methods) project was presented in 2006 during a conference . Here at last, researchers had the opportunity to compare their algorithms in an objective manner. The first challenge, called DREAM2, was held between July and October 2007, and the outcome was presented both in a dedicated conference and in a special issue of the Annals of the New York Academy of Sciences . The initiative was appreciated by the community, and in June 2008 the DREAM3 challenges were presented . Compared with DREAM2, some of these challenges were turned to issues where the predictions could be directly measured, and were in this sense more realistic. Of special interest for the present authors was the challenge of predicting rankings of expression values for 50 genes in one time-series, where a compendium of 9335 probes for 32 expression profiles, divided into four time-series corresponding to various mutants, of yeast, Saccharomyces cerevisiae, were presented (the values for the searched genes were of course removed for the time-series of interest). One was also allowed to utilize any public data available.
Integration of data, which this challenge implicitly called upon, has been the subject of much attention recently; see for example the review by Hecker et al. . There are several rationales for merging data when analyzing the outcome of high-throughput experiments. First and foremost is the fact that the systems and networks one infers often have so many units/nodes that the problem is not well-posed, for any mathematical model, due to lack of data ,  (unless one introduces further constraints, such as sparseness). This is especially true when the measurements have been genome-wide, which means that they comprise data from thousands of units/genes, while the number of measurements for one condition seldom exceeds a few hundred. Another rationale is the quality of the data, which often is low. Therefore, it is of importance to strengthen the quality of the inference process by guiding it as much as possible with data corresponding to various angles of approach. In this article we present our contribution to the DREAM challenge, both describing which data we integrated and how the inference algorithm was developed. We also analyze our result, something which could be done first after the submission period was over and the observed values were released. The paper starts with a survey of the specific challenge for the DREAM competition, followed in the next section by the results we obtained. In this result section, we also compare the performance of our algorithm with others participating in the challenge. Thereafter, we have a discussion on what can be learnt from this exercise and suggest some lines of future research. In the methods section, we give a description of how we developed our algorithm; especially we describe in detail both how we integrate more expression data from other conditions and utilize information on TF (transcription factor) bindings.
The Gene Expression Prediction Challenge of DREAM3
The challenge for predicting gene expression provided by the DREAM project is of great importance to explore the benefits and bottlenecks of the state-of-the-art algorithms in a fair competition. It represents a solution to the non-trivial problem of designing relevant challenges which at same time addresses biological and computational interesting problems. From the DREAM web-site [wiki.c2b2.columbia.edu/dream/index.php/The_DREAM_Project, accessed October 10, 2008] we quote for the gene expression prediction challenge within DREAM3:
Gene expression time course data is provided for four different strains of yeast (S. Cerevisiae), after perturbation of the cells. The challenge is to predict the rank order of induction/repression of a small subset of genes (the “prediction targets” in one of the four strains, given complete data for three of the strains, and data for all genes except the prediction targets in the other strain. Predictors are also allowed to use any information that is in the public domain but are expected to be forthcoming about what information was used.
Background. GAT1, GCN4, and LEU3 are yeast transcription factors. Each of these transcription factors has something to do with controlling genes involved in nitrogen or amino acid metabolism. The genes are not essential because strains that have perfect deletions of any of these genes are viable. In this challenge, we provide gene expression data from four strains: (i) a strain that is wild-type for all three transcription factors (wt, or parental), (ii) a strain that is identical to the parental strain except that it has a deletion of the GAT1 gene (gat1Δ), (iii) a strain that is identical to the parental strain except that it has a deletion of the GCN4 gene (gcn4Δ), and (iv) a strain that is identical to the parental strain except that it has a deletion of the LEU3 gene (leu3Δ).
Expression levels were assayed separately in all four strains following the addition of 3-aminotriazole (3AT). 3AT is an inhibitor of an enzyme in the histidine biosynthesis pathway and, in the appropriate media (which is the case in these experiments) inhibition of the histidine biosynthetic pathway has the effect of starving the cells for this essential amino acid.
Data from eight time points was obtained from 0 to 120 minutes. Time t = 0 means the absence of 3AT.
The challenge. Predict, for a set of 50 genes, the expression levels in the gat1Δ strain in the absence of 3-aminotriazole (t = 0) and at 7 time points (t = 10, 20, 30, 45, 60, 90 and 120 minutes) following the addition of 3AT. Absolute expression levels are not required or desired; instead, the fifty genes should be ranked according to relative induction or repression relative to the expression levels observed in the wild-type parental strain in the absence of 3AT.
This challenge is biologically relevant, and the fact a gold standard exists but is hidden makes the challenge objective and fair. Further, the probe names were given, which allows for data integration of publicly available experiments and a priori knowledge, making the challenge even more realistic in describing a situation which can occur in one's laboratory. However, the problem is somewhat different from the normal setting in systems biology where the aim is not only to predict future experiments but also to obtain interpretable models from which we can gain an increased biological understanding –. The data for this DREAM challenge was kindly delivered by Neil Clarke and co-workers, a fact which was revealed first after the submission period for predictions had closed. We will henceforth refer to this data as the “DREAM data”.
The goal of the challenge of DREAM was to predict the order of the chosen 50 genes within the gat1Δ strain for the eight time points at which they were measured. All details about the algorithm we utilized and how it was developed can be found in the Methods section. When the gold standard was revealed, it turned out that the mean correlation we obtained was 0.563, and that we, together with a prediction submitted by J. Ruan  who obtained a mean correlation of 0.558, had performed substantially better than the other participants.
- Table 1. Using only the expression values for obtaining a perfect fit and a L2-minimization of the coefficients, we get a rank correlation with the gold standard of 0.535. Actually, the highest value here is obtained for the case when both values and rates are included, and a L1-minimization of the coefficients is performed; in this case the rank correlation is 0.609. These numbers should be compared with Table 1, where we can see the correspondences 0.712 and 0.663, respectively, for these two methods.
- Table 2. Combining least squares with the elastic net for the gat1Δ strain gives a rank correlation of 0.620, while RLAD results in 0.320. Compare this with Table 2, which has corresponding values of 0.794 and 0.681.
- Table 3. The prediction for the gat1Δ strain has a correlation with the gold standard of 0.623 when more expression data are included. When we also add prior knowledge of TF-bindings, the correlation increases further to 0.624. These correlations correspond to the values 0.856 and 0.857 from Table 3.
Table 1. Spearman rank correlations for predictions obtained by perfect fits and minimization of L1- and L2-norms.doi:10.1371/journal.pone.0009134.t001
Table 2. Spearman rank correlations based on two different inference schemes.doi:10.1371/journal.pone.0009134.t002
Table 3. Spearman rank correlations after soft integration of other data sets.doi:10.1371/journal.pone.0009134.t003
An observation here is that the submitted prediction for the gat1Δ strain correlates less well with the gold standard than each of the series explored during the development of the algorithm. Neil Clarke points out in his referee report (published on-line accompanying this article) that he picked some of the genes to be predicted because of their surprising or non-trivial expression pattern the gat1Δ strain. This fact, combined with a general observation that cross-validation often underestimates the error , makes this result less surprising. Nevertheless, each step we take in the progression of the algorithm increases its performance, and as mentioned in the list above, we have the sequence of rank correlations as 0.535, 0.620, 0.623 and 0.624. The reason for these numbers being lower than the ones from the training of the algorithm is presently unclear to us.
Considering the result for each time point, Figure 1, we can see a huge variation in how well we, and the other groups, succeeded. The upper blue curve (stars) shows the correlations we obtained for each time point, while the slightly lower green curve (circles) is for Ruan. The red curve with plus-signs is the mean of all other participants. We can see how some time points obviously are harder than others to predict. For example, for we obtained a correlation of only 0.285 but for it is 0.675. Interestingly, the expression values which are harder to predict seem to be harder for all proposed methods, not only for our, and the curves co-vary. Especially, we can at see how all algorithms make worse predictions than in nearby time points. Indeed, our result and the Ruan-result are correlated with a correlation coefficient of 0.957. The reason for this needs more research to find out.
Figure 1. Spearman rank correlation for each time point.
The correlations are all with respect to the gold standard. The upper blue curve (stars) is our result; the green curve slightly below (rings) belongs to Ruan , while the lower red curve (plus-signs) is the mean of all other participants. The connecting lines are only guides for the eye. Note how the rankings for some time points obviously are harder to predict than others, and that the results are clearly co-varying.doi:10.1371/journal.pone.0009134.g001
If we instead consider the obtained rank correlations with the gold standard per gene, instead of per time point, we get the result in Figure 2. Also here, not surprisingly, the results by us and Ruan co-vary, but this time with the smaller correlation coefficient of 0.521. The variation this time is also considerably larger, where the highest rank correlation we obtain is 0.97 and the lowest is . That is, for some genes we obtain orderings which are worse than lists picked by random. This is interesting, since it means there are a lot of improvements to be made. See, however, the discussion in  about the possible inappropriateness of using the Spearman rank correlation for the time-profile correlations the way it is done here, resulting in too pessimistic estimates of the performance of the algorithms. The reason is that the rank-transformation was performed for each time point, making comparisons between different times problematic. That is, this might introduce errors in estimating the time-profile accuracy. However, we refrain from any recalculations since then all submissions should be reconsidered.
Figure 2. Spearman rank correlation for each gene.
The correlations are all with respect to the gold standard. The upper blue curve (stars) is our result; the green curve slightly below (rings) belongs to Ruan , while the lower red curve (plus-signs) is the mean of all other participants. The connecting lines are only guides for the eye. Most of the times, these results co-vary, but occasionally they have even different signs. The two breaks of the mean curve (gene numbers 13 and 38) come from some non-valid numbers in the presented results.doi:10.1371/journal.pone.0009134.g002
The importance of challenges as DREAM lies to a large extent in its objectiveness. When an inference algorithm comes from the same laboratory as the one which has performed the assessment experiments, sometimes even in the same article, it is likely the algorithm has been tuned to fit with the expected outcome. This is most probably often over fitting, and decreases then its performance for other data sets. Also, the value of this procedure as an assessment is questionable, since the testing of only a few of the predictions of the algorithm has a clear anecdotic flavor, especially when the researcher can choose by him- or herself which parts should be presented. As a contrast, the DREAM challenges provide the community with workbenches where all are welcome to submit the predictions of their algorithms, and thereby getting the opportunity to assess and compare them with the performance of others. No one knows the gold standard beforehand, and even if the evaluation data is limited, it is well defined but still no fine tuning can be carried out. This makes a huge difference compared with the case mentioned above, when the same laboratory both performs the experiments and present inference algorithms with alleged generalizability.
However, this appreciated objectiveness and fairness of DREAM holds of course true only as long as the gold standard is hidden. As soon as it is revealed, one can start improving one's algorithm to better fit the expected outcome, but at the same time taking the risk of exposing it to over fitting. Any “improvements” at this stage must be very well motivated in order to make any sense at all. For example, for our algorithm, we could consider the possibilities to use local fitting parameters instead of a global one for the prior, or to further prune the model by choosing parameter values not at the cross-validation minimum, but one standard deviation below, etc. Due to the above mentioned reasons, we refrain from such actions, though, and instead look forward to the next round of DREAM.
The algorithm here presented represents one efficient way of predicting rankings of expression values. A key component in the development of the algorithm has been the inclusion of results of measurements not directly associated with the experimental condition for which the expression values should be predicted. Whether this inclusion has been for more expression data or for prior knowledge of TF-DNA bindings, a cross-validation scheme has helped us not to rely more on these measurements than the original data allow. This is denoted as “soft integration” and forms a cornerstone of our work. The success of the algorithm clearly shows that prediction of expression levels is a possible task, even when the number of genes in the system exceeds the number of experiments 100-fold.
Surprisingly, the inclusion of a priori knowledge of TF-DNA bindings did not improve the performance of the algorithm substantially. The reason for this needs more research to find out, since the quality of this kind of data is generally believed to be reasonably high. A hypothesis is that our choice to have just one global parameter for tuning the impact for all genes was too restrictive.
Interestingly, the second best performance algorithm, by J. Ruan, is based on a very different thinking with respect to data integration. There, only the data provided by DREAM is utilized, and their algorithm is based on profile similarities measured by Euclidean distances and predictions from k-nearest neighbors, KNN . Nevertheless, the performance of that algorithm was only on average slightly less satisfying than the performance of ours. Indeed, in not a few instances it even performed better than ours, and in  an even stronger version is presented, although it was presented first after the gold standard was revealed. When we consider the similarities per experiment (Fig. 1) or per gene (Fig. 2), we can see how our two algorithms seem to function equally well, with the exception of some genes (for example, number 19, 22, 29 and 46, as shown in Fig. 2).
The reason for the success, and failure, for both of these two philosophies for prediction of gene expression needs further research to find out. Especially, the cases where one algorithm is successful and the other is not, deserve extra attention. As a final remark, we stress again how the integration of data, which is important for our algorithm, did not at all appear in the Ruan-algorithm, but still the results are similar. That is, a simple method as KNN can still be as effective as a more sophisticated algorithm where TF-DNA bindings etc. are taken into account. This means there is probably a lot of improvements possible, which is a challenge for the future development of computational systems biology.
The quest for modelling gene networks has taken many different forms during the last decade , , , . One of the major modelling frameworks is provided by ODEs, ordinary differential equations, which is the form we exploit here for the development of our algorithm.
An often utilized approach for large-scale modelling of gene regulatory networks is to only consider the transcripts, and thereby letting all interactions be projected onto the space of genes only . By this, one obtains a gene-to-gene network, sometimes referred to as “‘influential’ gene regulatory network” . Further, the amount of data available makes most models except linear ones behind reach, and one therefore assumes a linear relation between the expression rates and the expression levels – (or some non-linear transformation of them, the equations still being linear, though ). The rationale for this assumption of linearity is normally expressed as a belief in the system being close to some equilibrium or working point, and thus an expansion keeping only the linear terms would be appropriate. The basic dynamical equation then looks like(1)
Here denotes the expression level of gene at time , and the dot on the left hand side denotes its time-derivative. The coefficients and the elements are to be inferred and describe the gene regulatory system on a gene-to-gene level. The interactions, i.e., the non-zero , can both correspond to (semi)-direct interaction, for instance when denotes the RNA-level of a transcription factor which binds to the promoter of gene , and indirect interactions, for instance when gene stands for an inhibitor of a transcription factor which in its turn regulate gene . Note that the coefficient can be both positive, describing activation, and negative, describing inhibition. Since this is a dynamical equation, it can be used for studying the time-development of the model, including aspects as stability and flexibility .
Here, however, we are not primarily interested in the dynamics or in the derivatives of the 50 genes in the gat1Δ strain which were removed from the data file, but in the prediction of their expression levels. By denoting this set of 50 genes as , we reformulate and generalize Eq. (1) to(2)
for all .
In order to obtain a ranking list based on the expressions of the 50 genes in , we must predict the values of for all from (2). For this, we need explicit values of and . Given the values of and for all and for all , this can be formulated as a minimization problem with the objective function(3)
We will here stick to the cases where , least absolute deviations (LAD), and , least squares (LS), respectively. The penalty term is utilized for discriminating among models, and is to be determined later. For the moment, it is set to zero. The experiments are assumed to have been performed at time , where we for ease of notation let the index run over all three complete time-series (the gat1Δ-series, i.e., the series which should be predicted, is never utilized for the inference, since it is from this series we determine the output which is submitted for the challenge – hence there is a risk of over fitting if we utilize it twice).
The DREAM data are measured by Affymetrix chips of 9335 probes, and obtained from two biological and two technical replicates. We map the probe-names onto unique gene names, which leave 7804 units, where we use mean values when more than one probe corresponded to one gene. Furthermore, we approximate the derivatives from central differences, except at the end points of each series. At time we set the derivative to zero, since it was right before the addition of 3AT, and at the final time we approximate the derivatives from backward differences.
Throughout the article, we utilize cross-validation (CV) to discriminate among models. We hold one of the three time-series provided by DREAM out from the inference, and utilize the other two, and occasionally also other data sets, for finding the searched parameters. We then use data from the left out strain to predict the expression values of the 50 searched genes for each time point in the this series, rank them according to the predicted levels such that the highest expressed gene obtain rank number one, second highest rank number two, etc., and calculate the Spearman rank correlation with the observed ranking of the same series. This is repeated three times, holding each of the provided time-series out a time. We end up with 24 different ranking lists for the 50 genes in , eight for each time-series. Henceforth, we will refer to this procedure simply as “cross-validation”. Note that this approach to only hold one of the given time-series out still holds also when external datasets are introduced.
Before we start exploring various versions of the penalty term in (3), we try to simplify the model (2). The strategy is to primarily work with the DREAM data, in order to reduce the model. When this first reduction is obtained, we will utilize also other publicly available data in order to further strengthen the predictive power of our mathematical model. This first model selection is performed among the models with perfect fits, i.e., the ones where the terms for the first sum of absolute values in (3) all are zero, making the exponent irrelevant, and we get an idea on what to include. This perfect fit is possible since for each gene value we should predict, that is, for each i, we have 15 509 free parameters to determine from 16 linear equations (one per time point). We explore the following three scenarios:
- Only expression values are included
- Both expression values and expression rates (derivatives) are included
- Only expression rates (derivatives) are included
By picking the solution with zero value for the objective function (without penalty term) and choosing the coefficients and such that their L1-norm and L2-norm , respectively, are minimized, we obtain the values of the Spearman rank correlations presented in Table 1. The rank correlations are for each series comprising eight time points as well as for the full 24 lists simultaneously (referred to as “overall”) obtained by cross-validation. Note that this is not the same as the mean value of each time-series or time point.
We see that the highest values for the correlations are obtained when we only include the expression levels. Inclusion of the expression rates makes the result slightly worse, except for the least squares where the correlations are equal. However, with the same predictive power, we apply Occam's razor and prefer the simplest model. To only use the rates gives the least satisfying result of them all. Therefore, in the sequel, we choose to discard all derivative terms and determine the parameters according to(4)
Here we use the short-hand notation for and drop the intercept term since we also centre the data. What remains is to determine the value of m and the explicit form and value of the penalty term.
By choosing the exponent we turn the problem into Least Squares (LS), while gives Least Absolute Deviations (LAD). Least squares are known to be sensitive for outliers, while LAD is not affected by such at all. However, the solutions obtained from LAD are unstable, in the sense that small variations in data might result in large variations of the inferred parameters, that is, least squares are a more stable inference method. Indeed, LAD can be compared with picking the median, which may be devastating when we are already short of data . Both methods will here be explored.
The penalty term can take many different forms. A review for least squares of more classical forms as Mallow's Cp, Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC), Minimum Description Length (MDL) etc in the context of gene networks can be found in . We will here stick to forms which are computationally attractive, which is important since the size of the present problem makes methods based on exhaustive search practically impossible. We choose for least squares the form(5)
This is known as the elastic net  and is a convex combination of the well established methods of ridge regression  and of the lasso , . For LAD, least absolute deviations, only the “lasso-form”, i.e., , is of practical interest due to implementation considerations. This case is called regularized least absolute deviation (RLAD) .
This convex combination is a compromise between the two goals of a good solution, to have good predictive power and to be interpretable . The L1 penalty in the lasso favours sparse solutions, i.e., it performs effectively a subset selection, but is greedy in the case of correlated predictors since it only picks the most correlated predictor. On the other hand, the L2 penalty in ridge regression keeps all predictors as non-zero with probability one, but is not greedy as the lasso. It has been argued that this compromise can overcome some of the limitations of the lasso and ridge regression, with the preservation of the benefits from each of the pure methods . In Table 2 we investigate what kind of penalty is most predictive for our purpose. We investigate the elastic net for least squares and RLAD for least absolute deviations on the DREAM data set. The parameters and are obtained from an exhaustive grid search over the parameter space and 1000 equidistant values of between zero and the upper limit (defined as the limit where the found solution coincides with the solution without penalty term). The parameters are eventually chosen with cross-validation. In practice, we utilize the R-package glmnet by Friedman et al. . It turns out that the values of vary with in the whole interval between zero and one, with a median of 0.75. That is, the solution is “lasso-like”, but still the maximum in-degree turns out to be 488 (with median 23.5) which is not possible for a pure lasso where the number of predictors cannot exceed the number of experiments.
We show in Table 2 the results of such an optimization. The entries are the Spearman rank order correlations obtained from cross-validation, i.e., they are the best measure of performance we have without adding any prior information. The general conclusion from Table 2 is that least squares regression combined with the elastic net is to prefer among the methods. From a correlation of 0.794 it is worthy to proceed with further improvements by integrating more data into the inference process. Worth noting is that in this process, the parameters and are not fixed, but will be recalculated by new cross-validation procedures.
One way to improve the performance of the algorithm is to include more data. This is a challenging problem which is crucial for all kinds of large-scale inference problems . Previous work has shown, however, that uncritical inclusion of more data can even decrease the performance of an algorithm . For yeast, huge amounts of public data are available, which potentially can improve the quality of the inferred models. The main issue is to select and process only the relevant data sets. This must be done in a careful, supervised way to avoid over fitting, because validation data are on the other hand severely limited. The here presented framework introduces two main possibilities, integration of more expression data and introduction of prior knowledge of regulatory interactions.
More expression data.
A straightforward way to include other types of expression sets is to extend the sum of squares in (4) over more data sets. We integrate two collections of expression sets, which reduce the number of possible genes to use as explanatory variables further; down to 4140 genes (since the numbers differ across the experiments, and we only utilize those genes for which we have measurements in all experiments). The final collection comprises:
- A set of total of 515 steady-state profiles from a collection of the gene knock-out experiments  and other heavy perturbations  from the Rosetta Inpharmatics
- A set of 256 time-series profiles, comprising a collection of time-series experiments downloaded from ncbi omnibus ,  with GEO accessions GDS16, GDS18, GDS19, GDS20, GDS30, GDS33, GDS34, GDS36, GDS37, GDS38, GDS39, GDS104, GDS108, GDS109, GDS112, GDS113, GDS115, GDS124, GDS180, GDS283, GDS354, GDS608, GDS1013, GDS1752, GDS2267 and GDS2715
However, the experimental conditions can vary a lot, and most of them are probably distant from the conditions we actually are interested in. It is therefore likely that these profiles have less impact on the actual problem than the primary profiles presented for the actual problem. We therefore introduce an extra coefficient for each term in (4), which becomes(6)
These coefficients are chosen to be unity for the DREAM data, to set the scale, and we determine their values otherwise by the cross-validation procedure. In order not to have too many free parameters in the model, we pick one value for the 515 steady state profiles from Rosetta, and another value for the 256 profiles from the time-series of ncbi omnibus, . The result is shown in the first line of Table 3.
Prior knowledge of TF-DNA regulations.
The TF-DNA binding data are taken from Yeastract , , and give clues on which genes are likely to act as regulators. To take this knowledge into account, we utilize a modified form of the penalty in (5). Now, we choose a different penalty for each predictor such that we increase the probability for a non-zero if gene j somehow, to be specified below, is co-regulated with gene i. By utilizing the cross-validation scheme, we integrate this prior knowledge in a soft way, i.e., we bias the search to known relations, but allow also the possibility of novel links. Explicitly, expression (5) is modified by the introduction of parameters , called priors, reflecting the likeliness of gene not to be co-regulated with gene i, to look like(7)
That is, the prior corresponds to our prior belief that there is no correspondence between gene j and gene i, since a high value of implies a high penalty, and thus there has to be a high correlation between the genes to include gene j as a predictor for gene i. We let the parameters be between zero and unity, with no loss of generality, since it is only the relative difference which is of relevance, while takes care of the global magnitude of the penalty.
The reason why we focus on co-regulation rather than regulatory interactions is that the values of the inference are based on transcript levels, and TFs are known to be expressed on a low level. Also, their activity is often determined by phosphorylation and other effects rather than their amount , which makes the levels even more dubious. Therefore, we concentrate not on the TFs themselves but on genes which are controlled by the same TFs and thus might act as predictors for each others. The rationale can also be formulated such that if two genes are regulated by the same set of TFs they are likely to have large (anti-) correlation, thus the level for one of the genes should be a good predictor for the other, see Figure 3. The explicit calculation is carried out through the TF interaction matrices obtained from Yeastract , . We set if there is documented experimental evidence for TF-j binding upstream of gene i and if there is either experimental evidence or putative evidence (or both) for such a binding. Otherwise, the elements are set to zero. From these TF interaction matrices, we calculate the weighted shared fraction of TFs between gene j and gene i, , as(8)
Note that is a symmetric matrix, , just as it should from its definition of a weighted shared fraction of TFs. The prior finally is chosen as:(9)
where is a free global parameter to be determined later by cross-validation.
Figure 3. Schematic view of how to obtain the weighed shared fraction of TFs.
We utilize as prior information that genes which are co-regulated are likely to be effective predictors of each other; the more TFs in common, the more likely to be co-regulated.doi:10.1371/journal.pone.0009134.g003
To summarize the discussion above, the objective function takes the form(10)
where the penalty term is(11)
Thus, the data integration leaves us with 207,103 parameters () in total to determine. The global parameters result in the fractional value of 4142.06 parameters for each gene to predict. That is, the cross-validation procedure we utilize has to minimize expression (10) with a penalty term of the form presented in (11) and detailed in (8). We minimize it by a greedy stepwise procedure, again using the R-package glmnet .
Effectively, for each target gene , we start from the value of found without any prior and explore and individually. For each sets of values for these parameters, we run glmnet with 1000 values of (described above) and perform local searches in around its present value, changing it if the Spearman rank correlation increases. The parameters and are introduced in the order they increase the performance of the algorithm, but when a value is determined, we do not change it again. It turns out they are introduced in the order and , with the values and , respectively. They are obtained by in an iteratively refinement process, where the initial searches for are in the range between zero and one, and values for from the set . The refined search utilizes steps of the size for and 0.01 for . The result is shown in the second line of Table 3. We can see how this final step further increases the quality of the performance of the algorithm, although the increase this time is not as drastic as before. Worth noting is also how the Rosetta data contribute ten times more than the data from the ncbi omnibus. The rather low value of is also an indication that the positive contribution of known TF-DNA bindings is limited.
Finally, from a computational point of view, we remark that all implementations and calculations have been performed on an ordinary laptop in the languages R and Matlab. That is, the complexity of the problem is not worse than it can be handled in any laboratory.
We thank the organizers of the DREAM project, and especially the DREAM3 challenges, Gustavo Stolovitzky and colleagues , for providing an excellent service to the community. We also thank Neil Clarke and his collaborators for providing the data for the present challenge and Jianhua Ruan for kindly sending us the manuscript for  prior to publication.
Analyzed the data: MG MH. Contributed reagents/materials/analysis tools: MG. Wrote the paper: MG MH.
- 1. Barabási A-, Oltvai ZN (2004) Network biology: Understanding the cell's functional organization. Nature Reviews Genetics 5(2): 101–113. doi: 10.1038/nrg1272
- 2. Stolovitzky G, Monroe D, Califano A (2007) Dialogue on reverse-engineering assessment and methods: The DREAM of high-throughput pathway inference. Annals of the New York Academy of Sciences 1115: 1–22. doi: 10.1196/annals.1407.021
- 3. Stolovitzky G, Prill RJ, Califano A (2009) Lessons from the DREAM2 challenges: A community effort to assess biological network inference. Annals of the New York Academy of Sciences 1158: 159–195. doi: 10.1111/j.1749-6632.2009.04497.x
- 4. Stolovitzky G (2009) DREAM3. PLoS ONE. 5(2). doi:10.1371/journal.pone.0009202.
- 5. Hecker M, Lambeck S, Toepfer S, van Someren E, Guthke R (2009) Gene regulatory network inference: Data integration in dynamic models-A review. BioSystems 96(1): 86–103. doi: 10.1016/j.biosystems.2008.12.004
- 6. Hörnquist M, Hertz J, Wahde M (2002) Effective dimensionality of large-scale expression data using principal component analysis. BioSystems 65(2–3): 147–156. doi: 10.1016/S0303-2647(02)00011-4
- 7. Hörnquist M, Hertz J, Wahde M (2003) Effective dimensionality for principal component analysis of time series expression data. BioSystems 71(3): 311–317. doi: 10.1016/S0303-2647(03)00128-X
- 8. Kitano H (2002) Computational systems biology. Nature 420(6912): 206–210. doi: 10.1038/nature01254
- 9. Bonneau R (2008) Learning biological networks: From modules to dynamics. Nature Chemical Biology 4(11): 658–664. doi: 10.1038/nchembio.122
- 10. Cho K, Choo S, Jung SH, Kim J, Choi H, et al. (2007) Reverse engineering of gene regulatory networks. IET Systems Biology 1(3): 149–163. doi: 10.1049/iet-syb:20060075
- 11. Ruan J (2009) A top-performing algorithm for the DREAM3 gene expression prediction challenge. PLoS ONE 5(2): doi:10.1371/journal.pone.0008944.
- 12. Tibshirani RJ, Tibshirani R (2009) A bias correction for the minimum error rate in cross-validation. Ann Appl Stat 3(2): 822–829.
- 13. De Jong H (2002) Modeling and simulation of genetic regulatory systems: A literature review. Journal of Computational Biology 9(1): 67–103. doi: 10.1089/10665270252833208
- 14. Brazhnik P, De La Fuente A, Mendes P (2002) Gene networks: How to put the function in genomics. Trends Biotechnol 20(11): 467–472. doi: 10.1016/S0167-7799(02)02053-X
- 15. D'Haeseleer P, Liang S, Somogyi R (2000) Genetic network inference: From co-expression clustering to reverse engineering. Bioinformatics 16(8): 707–726. doi: 10.1093/bioinformatics/16.8.707
- 16. Gustafsson M, Hörnquist M, Lombardi A (2005) Constructing and analyzing a large-scale gene-to-gene regulatory network–lasso-constrained inference and biological validation. IEEE/ACM Trans Comput Biol Bioinform 2(3): 254–261. doi: 10.1109/TCBB.2005.35
- 17. Dewey TG, Galas DJ (2001) Dynamic models of gene expression and classification. Functional and Integrative Genomics 1(4): 269–278. doi: 10.1007/s101420000035
- 18. Gustafsson M, Hörnquist M, Lundstrom J, Bjorkegren J, Tegner J (2009) Reverse engineering of gene networks with LASSO and nonlinear basis functions. Ann N Y Acad Sci 1158: 265–275. doi: 10.1111/j.1749-6632.2008.03764.x
- 19. Gustafsson M, Hörnquist M, Bjorkegren J, Tegner J (2009) Genome-wide system analysis reveals stable yet flexible network dynamics in yeast. IET Syst Biol 3(4): 219–228. doi: 10.1049/iet-syb.2008.0112
- 20. Narula SC, Wellington JF (1982) The minimum sum of absolute errors regression: A state of the art survey. International Statistical Review 50: 317–326. doi: 10.1002/dneu.20574
- 21. Thorsson V, Hörnquist M, Siegel AF, Hood L (2005) Reverse engineering galactose regulation in yeast through model selection. Stat Appl Genet Mol Biol 4: Article28. doi: 10.2202/1544-6115.1118
- 22. Zou H, Hastie T (2005) Regularization and variable selection via the elastic net. Journal of the Royal Statistical Society.Series B: Statistical Methodology 67(2): 301–320. doi: 10.1038/nrg1272
- 23. Draper NR, Smith H (1998) Applied regression analysis. New York: John Wiley & Sons, Inc.
- 24. Tibshirani R (1996) Regression shrinkage and selection via the lasso. Journal of the Royal Statistical Society Series B: Statistical Methodology 58(1): 267–288. doi: 10.1002/sca.4950260408
- 25. Wang L, Gordon MD, Zhu J (2007) Regularized least absolute deviations regression and an efficient algorithm for parameter tuning. Proceedings - IEEE International Conference on Data Mining, ICDM 690–700.
- 26. Friedman J, Hasie T, Tibshirani R (in press) Regularization paths for generalized linear models via coordinate descent. Journal of Statistical Software. doi: 10.1038/nchembio.122
- 27. Gustafsson M, Hörnquist M (2009) Integrating various data sources for improved quality in reverse of gene regulatory networks,. In: Das S, Caragea D, Hsu WH, Welch SM, editors. Computational Methods in Gene Regulatory Networks. IGI Global. pp. 476–496.
- 28. Hughes TR, Marton MJ, Jones AR, Roberts CJ, Stoughton R, et al. (2000) Functional discovery via a compendium of expression profiles. Cell 102(1): 109–126. doi: 10.1016/S0092-8674(00)00015-5
- 29. Bernardo DD, Thompson MJ, Gardner TS, Chobot SE, Eastwood EL, et al. (2005) Chemogenomic profiling on a genome-wide scale using reverse-engineered gene networks. Nat Biotechnol 23(3): 377–383. doi: 10.1038/nbt1075
- 30. Edgar R, Domrachev M, Lash AE (2002) Gene expression omnibus: NCBI gene expression and hybridization array data repository. Nucleic Acids Res 30(1): 207–210. doi: 10.1093/nar/30.1.207
- 31. Barrett T, Troup DB, Wilhite SE, Ledoux P, Rudnev D, et al. (2007) NCBI GEO: Mining tens of millions of expression profiles - database and tools update. Nucleic Acids Res 35: SUPPL. 1D760–D765. doi: 10.1093/nar/gkl887
- 32. Teixeira MC, Monteiro P, Jain P, Tenreiro S, Fernandes AR, et al. (2006) The YEASTRACT database: A tool for the analysis of transcription regulatory associations in saccharomyces cerevisiae. Nucleic Acids Research 34(Database issue): D446–451. doi: 10.1093/nar/gkj013
- 33. Monteiro PT, Mendes ND, Teixeira MC, D'orey S, Tenreiro S, et al. (2008) YEASTRACT-DISCOVERER: New tools to improve the analysis of transcriptional regulatory associations in saccharomyces cerevisiae. Nucleic Acids Res 36: SUPPL. 1D132–D136. doi: 10.1093/nar/gkm976
- 34. Alberts B, Johnson A, Lewis J, Raff M, Roberts K, et al. (2002) Molecular biology of the cell. New York: Garland Science.