Customized zinc finger nucleases (ZFNs) form the basis of a broadly applicable tool for highly efficient genome modification. ZFNs are artificial restriction endonucleases consisting of a non-specific nuclease domain fused to a zinc finger array which can be engineered to recognize specific DNA sequences of interest. Recent proof-of-principle experiments have shown that targeted knockout mutations can be efficiently generated in endogenous zebrafish genes via non-homologous end-joining-mediated repair of ZFN-induced DNA double-stranded breaks. The Zinc Finger Consortium, a group of academic laboratories committed to the development of engineered zinc finger technology, recently described the first rapid, highly effective, and publicly available method for engineering zinc finger arrays. The Consortium has previously used this new method (known as OPEN for Oligomerized Pool ENgineering) to generate high quality ZFN pairs that function in human and plant cells.
Here we show that OPEN can also be used to generate ZFNs that function efficiently in zebrafish. Using OPEN, we successfully engineered ZFN pairs for five endogenous zebrafish genes: tfr2, dopamine transporter, telomerase, hif1aa, and gridlock. Each of these ZFN pairs induces targeted insertions and deletions with high efficiency at its endogenous gene target in somatic zebrafish cells. In addition, these mutations are transmitted through the germline with sufficiently high frequency such that only a small number of fish need to be screened to identify founders. Finally, in silico analysis demonstrates that one or more potential OPEN ZFN sites can be found within the first three coding exons of more than 25,000 different endogenous zebrafish gene transcripts.
Conclusions and Significance
In summary, our study nearly triples the total number of endogenous zebrafish genes successfully modified using ZFNs (from three to eight) and suggests that OPEN provides a reliable method for introducing targeted mutations in nearly any zebrafish gene of interest.
Citation: Foley JE, Yeh J-RJ, Maeder ML, Reyon D, Sander JD, et al. (2009) Rapid Mutation of Endogenous Zebrafish Genes Using Zinc Finger Nucleases Made by Oligomerized Pool ENgineering (OPEN). PLoS ONE 4(2): e4348. doi:10.1371/journal.pone.0004348
Editor: David W. Raible, University of Washington, United States of America
Received: November 19, 2008; Accepted: December 15, 2008; Published: February 9, 2009
Copyright: © 2009 Foley et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: J.E.F., M.L.M., and J.K.J. are supported by the NIH (R01 GM069906 and R21 HL091808) and the MGH Department of Pathology. J.-R.J.Y. is supported by the National Institute of Aging (K01 AG031300) and by a Claflin Distinguished Scholar Award. J.-R.J.Y. and R.T.P. are supported by the NIH (R01 HL79267). J.D.S is supported by Pioneer-Hi-Bred International, Inc 2008 Graduate Fellowship, NIH R33-GM066387, and ISU CIAG. D.R is supported by ISU CIAG. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: J.K.J. is an inventor on patent applications which describe the OPEN zinc finger engineering method. All other authors have no competing interests to declare.
Engineered zinc finger nucleases (ZFNs) form the basis of a broadly applicable technology for highly efficient genome modification –. ZFNs function as dimers  with each monomer consisting of an engineered zinc finger array (typically composed of three or four fingers) fused to a non-specific cleavage domain from the FokI endonuclease , . Zinc finger arrays in ZFNs can be engineered to bind target DNA sequences of interest –, thereby enabling the introduction of double-strand DNA breaks (DSBs) into specific genomic sequences.
ZFNs can be used to alter endogenous genes in Drosophila and mammalian cells with absolute efficiencies ranging from 1%–50% –. ZFN-induced DSBs can be repaired by non-homologous end-joining (NHEJ), an imperfect process which frequently results in the creation of insertions and deletions (indels) at the site of the break. Alternatively, repair of a ZFN-induced DSB by homologous recombination (HR) with an appropriately designed exogenous “donor template” (an approach known as “gene targeting”) can be used to introduce a specific mutation near the break or to insert a DNA sequence at the the break.
Recent proof-of-principle studies have shown that ZFNs can also be used to create targeted NHEJ-mediated knockout mutations in endogenous zebrafish genes. Wolfe and Lawson created ZFN-induced knockouts in the kdr gene  while Amacher and colleagues mutated the golden and ntl genes . These results demonstrate that ZFNs can provide an important genetic capability previously unavailable to researchers in the zebrafish field and have created much excitement in the community.
An important question raised by these groundbreaking studies is how can the typical zebrafish researcher generate the customized ZFNs required to practice this targeted knockout technology . The Wolfe and Lawson kdr ZFNs  were made using a modified version of a previously described two-stage optimization strategy . This approach is very difficult for the non-specialist scientist to practice because it requires the construction and interrogation of three partially randomized zinc finger libraries and of a secondary recombinant library derived from the outputs of the initial three libraries. The ntl and golden ZFNs used by Amacher and colleagues were constructed using a proprietary engineering platform developed by Sangamo BioSciences, Inc. . ZFNs made by this proprietary method can be purchased from Sigma-Aldrich but the high fee charged per ZFN pair  may make it difficult for most labs to purchase ZFNs for more than one or two genes of interest. A third method previously used to make ZFNs (for use in other cell types) is the “modular assembly” approach in which zinc fingers with pre-selected specificities are joined together –. However, a recent large-scale assessment of the modular assembly method demonstrated that it is highly inefficient with a success rate for making functional ZFN pairs that is at best ~6% .
The Zinc Finger Consortium recently described the development and validation of a rapid, highly effective, and publicly available method for engineering zinc finger arrays termed OPEN (for Oligomerized Pool ENgineering) . OPEN requires the construction of only a single recombinant zinc finger library (smaller than 106 in size) and yields ZFNs that function with high efficiencies in human and plant cells . The method accounts for the context-dependent DNA-binding activities of zinc fingers, a parameter that previous studies have suggested is important for creating arrays with high DNA-binding affinities and specificities , –. In direct comparisons, OPEN exhibited a much higher success rate for yielding functional ZFNs than the modular assembly method . In indirect comparisons performed with different target sites, ZFNs made by OPEN also exhibited activities and toxicities comparable to ZFNs made by the proprietary Sangamo BioSciences approach .
In this study, we use a modified and more rapid version of OPEN to generate ZFNs for five endogenous zebrafish gene targets. We show that these OPEN ZFNs efficiently induce indel mutations in their respective endogenous gene targets in somatic zebrafish cells. In addition, we demonstrate germline transmission of ZFN-induced mutations for four of the five gene targets. Finally, we use in silico analysis to show that one or more potential OPEN ZFN target sites can be found within the first three coding exons of more than 25,000 transcripts derived from endogenous zebrafish genes. Our results demonstrate that OPEN can rapidly generate ZFNs for efficient mutation of endogenous genes in zebrafish and provide strong additional support for its use with this important model organism.
Using OPEN to engineer zinc finger arrays for endogenous zebrafish gene targets
We used the OPEN method to engineer zinc finger arrays for potential ZFN target sites in five different endogenous zebrafish genes: dopamine transporter (dat), hypoxia-inducible factor 1α (hif1aa), telomerase, transferrin receptor 2 (tfr2), and gridlock. The targeted genes differ widely in size, genomic location, and functional class (channel, receptor, enzyme, transcription factor) and were selected for their relevance to ongoing zebrafish research projects or for their general utility for the zebrafish community. We used the web-based ZiFiT v3.0 software program (http://bindr.gdcb.iastate.edu/ZiFiT/)  to identify potential target sites in the coding sequences of these genes. Ten selections (one for each half-site in the five full ZFN target sites) were performed using an improved, more rapid version of our recently described OPEN method (Figure 1). Alterations made to the original method included miniaturization of the selections so that they can be performed using multi-channel pipets, multi-well (24-well) blocks, and smaller amounts of solid and liquid media (see Materials and Methods). These alterations have led to a substantial increase in the speed of the procedure: as many as 48 selections can now be completed by two individuals in less than 8 weeks time.
Figure 1. The OPEN Zinc Finger Selection Method.
(A) Schematic overview of OPEN selection for a target DNA site. Zinc finger domains are shown as spheres and associated 3 bp subsites as rectangles. Details provided in the text and in Maeder et al., Mol. Cell 2008. (B) Schematic of the bacterial two-hybrid (B2H) system. ZFP = zinc-finger protein. X and Y = arbitrary interacting proteins.doi:10.1371/journal.pone.0004348.g001
The OPEN selections we performed successfully yielded multiple active zinc finger arrays for all 10 target half-sites (Table 1). As before, we defined successful arrays as those that can activate transcription of a lacZ reporter gene by three-fold or more in the B2H system . Previous studies have shown that zinc finger arrays which activate transcription above this threshold in the B2H system possess high affinity and high specificity for their cognate DNA binding site . For comparison, we also tested the zinc finger arrays from the kdr ZFNs previously made by Wolfe and Lawson  on their respective target half-sites. Interestingly, we found that although one of the arrays (ZFP1) activated transcription more than three-fold in the B2H system, the other (ZFP2) failed to show any activation (Table 1). The lower activity of the kdr ZFP2 zinc finger array in the B2H system may be due to low DNA-binding specificity as well as to the lower stringency of the bacterial one-hybrid (B1H) system used to select the kdr-targeted zinc finger arrays (see Discussion below).
Table 1. Recognition helix (RH) amino acid sequences and B2H activities of zinc finger arrays for endogenous zebrafish gene targets.doi:10.1371/journal.pone.0004348.t001
Efficient somatic cell mutation of endogenous zebrafish genes using OPEN ZFNs
We next tested the abilities of zinc finger arrays obtained by OPEN to induce mutations when expressed as ZFNs in somatic zebrafish cells. To do this, we chose one zinc finger array for each ZFN target half-site and tested pairs as ZFNs (highlighted in bold italics in Table 1). To test the robustness of our OPEN selections, we chose zinc finger arrays with high (but not always the highest) B2H fold-activation for testing as ZFN pairs; however, all arrays tested met the minimum three-fold B2H activation threshold described above. DNA fragments encoding these zinc finger arrays were cloned into ZFN expression vectors previously constructed by the Joung lab (see Materials and Methods for details) . The ten resulting vectors encode ZFNs consisting of a FLAG epitope tag, an SV40 nuclear localization signal, and a zinc finger array fused to an obligate heterodimeric FokI nuclease domain . These vectors also harbor a bacteriophage T7 promoter positioned upstream of the ZFN coding sequence. As a positive control, we also constructed two additional ZFN expression plasmids which encoded obligate heterodimeric ZFNs harboring the Wolfe/Lawson kdr zinc finger arrays (ZFP1 and ZFP2) . We note that these control kdr ZFN plasmids are identical to our OPEN ZFN expression vectors except for the sequences encoding the zinc finger arrays. We transcribed RNA from each of these 12 ZFN expression plasmids and performed poly A-tailing of the RNA as described in Materials and Methods.
In an initial control experiment to test whether our ZFN vectors and experimental conditions would work efficiently in zebrafish, we injected ~100 embryos each with 100 pg of purified RNA made from the pair of vectors encoding the Wolfe/Lawson kdr ZFNs (50 pg of RNA encoding each ZFN). As shown in Figure 2, we observed that approximately 79% of the embryos were dead or exhibited a highly deformed “monster” phenotype, consistent with previously published experiments performed with these ZFNs . Furthermore, we observed that we could not inject more than 100 pg of RNA/embryo without causing death in almost all embryos (data not shown). To assess whether targeted mutagenesis of kdr occurred at the somatic cell level, we harvested genomic DNA from a pool of 10 embryos two days post-injection and sequenced the region of the kdr gene targeted by the Wolfe/Lawson ZFNs using a limited cycle PCR/DNA-sequencing method previously described and validated by the Joung lab for quantitation of mutations in a population of alleles . As shown in Figure 3A, 10% of the kdr alleles we sequenced harbored insertions or deletions at the site of the ZFN-induced DSB, a mutagenesis efficiency comparable to that previously observed by Wolfe and Lawson .
Figure 2. Toxicity and teratogenicity of OPEN and B1H-selected ZFNs in zebrafish embryos.
Percentages of dead, deformed (“monster”), and normal embryos following injection with the amounts of ZFN RNAs indicated are shown. Percentages were calculated from the number of embryos (n) indicated.doi:10.1371/journal.pone.0004348.g002
Figure 3. Frequencies and sequences of ZFN-induced mutations in somatic zebrafish cells.
For each gene targeted by ZFNs, the wild-type sequence is shown at the top with ZFN binding sites marked. Deletions are indicated by grey highlighted red dashes and insertions by blue highlighted lower case blue letters. The number of times each wild-type mutant allele was isolated is shown in brackets.doi:10.1371/journal.pone.0004348.g003
Having validated our ZFN expression vectors and mutation detection assay, we next tested each of the five ZFN pairs we made by OPEN in zebrafish embryos. Interestingly, with our OPEN ZFNs, we were able to inject four-times or more RNA per embryo (400 to 660 pg of RNA/embryo) compared with the Wolfe/Lawson kdr ZFNs and yet observed comparable or sometimes lower rates of death/monster formation (Figure 2). When OPEN ZFNs were injected at 100–200 pg of RNA/embryo, death/monster rates were even lower (0–27%; data not shown). To check for evidence of mutations in somatic cells, we isolated pooled genomic DNA from 4–10 embryos for each pair of ZFNs and performed limited cycle PCR/DNA sequencing to assess whether mutations were introduced at their intended endogenous gene targets. As shown in Figures 3B–3F, we observed insertion or deletions at the ZFN cleavage site for all five endogenous genes with mutagenesis rates ranging from 3%–20%. Nearly all of these indel mutations are predicted to create frameshift mutations although a few frame-preserved mutations are also observed. We conclude that OPEN ZFNs can efficiently induce mutations at endogenous genes in somatic zebrafish cells.
Efficient germline transmission of mutations induced by OPEN ZFNs
We tested whether ZFN-induced mutations observed in somatic zebrafish cells could be transmitted efficiently through the germline. Injected embryos remaining from four of the five somatic cell experiments described above were allowed to mature to adulthood and crossed with wild-type fish (fish in which gridlock had been targeted have not yet reached maturity and therefore have not yet been tested). To identify founders, we analyzed individual embryos from these crosses using either direct DNA sequencing or a restriction digest assay that checks for the loss of a restriction site located at the ZFN-induced DSB (see Materials and Methods). As shown in Table 2, founders were identified at frequencies of ~6%, 33%, 25%, and 50% for mutations in the dat, tfr2, telomerase and hif1aa genes, respectively. The percentages of embryos harboring ZFN-induced mutations from founders ranged from 9% to 60% (Table 2). We sequenced the mutations from a subset of these embryos to determine the molecular nature of the indels and found both frame-shifted and frame-preserved mutations (Figure 4). We conclude that mutations generated by OPEN ZFNs undergo efficient germline transmission in zebrafish.
Figure 4. Sequences of ZFN-induced mutations transmitted through the germline.
For each target gene, the wild-type sequence is shown at the top with ZFN binding sites marked and the mutated alleles found in founder progeny are shown below the wild-type sequence. Each mutant sequence shown was isolated from progeny of different founders. Deletions are indicated by grey highlighted red dashes and insertions by blue highlighted lower case blue letters.doi:10.1371/journal.pone.0004348.g004
Table 2. Frequencies of mutations from founder analysisdoi:10.1371/journal.pone.0004348.t002
In silico identification of OPEN ZFN targets within endogenous zebrafish genes
Using a program similar to the web-based software program ZiFiT v3.0 , , we searched for sites in endogenous zebrafish genes that could potentially be targeted by OPEN (see Materials and Methods). To do this, we searched the first three coding exons of 29,291 protein-coding gene transcripts that have known mapped chromosomal locations and that are present in the Ensembl Danio rerio database (release 51; http://www.ensembl.org/Danio_rerio/Info/Index). In total, we found 315,186 potential ZFN sites in these 29,291 gene transcripts (Supplemental Tables S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23, S24, S25). Importantly, we identified one or more potential OPEN ZFN sites (mean of ~4.5 sites) in the first three coding exons of 25,174 of these gene transcripts and two or more potential OPEN ZFN sites (mean of ~5.4 sites) in the first three-coding exons of 20,418 gene transcripts (Table 3). These results suggest that OPEN could potentially be used to generate ZFNs for as many as 86% of the transcripts encoded in the zebrafish genome.
In this report, we used the recently described OPEN zinc finger engineering method to rapidly generate ZFNs that can modify endogenous zebrafish gene targets with high efficiency. In less than two months time, we generated ZFNs for target sites in five different biologically important genes. The five pairs of ZFNs we tested can efficiently generate mutations at their intended endogenous gene target in somatic zebrafish cells. In addition, we demonstrated that mutations induced by OPEN ZFNs can be efficiently transmitted through the germline. These results suggest that only a small number of fish need to be screened to identify founders, consistent with previously published results , . Our results nearly triple the total published number of endogenous zebrafish genes successfully modified using ZFNs from three (kdr, golden, and ntl) to eight and demonstrate that OPEN is a highly effective ZFN engineering method for creating targeted mutations in zebrafish.
In silico analysis indicates that as many as 25,174 zebrafish gene transcripts have one or more potential OPEN ZFN target sites in their first three coding exons and as many as 20,418 transcripts have two or more sites in the first three coding exons. Our previous experience using OPEN to make ZFNs for endogenous human gene targets suggests that the success rate of this method is high but not 100% . Assuming that a similar experience holds true in zebrafish, a prudent strategy might be to target more than one sequence in a gene of interest to improve the chances of successfully mutating that gene. Our analysis shows that most zebrafish gene transcripts possess multiple potential OPEN ZFN target sites and therefore suggests that a large number of genes will be targetable by such a strategy. As the academic community collectively gains experience using OPEN ZFNs in zebrafish (and other organisms), we anticipate that algorithms for identifying potential OPEN ZFN target sites will also continue to improve and evolve, thereby allowing for targeting of fewer sites per gene. Nonetheless, our results strongly suggest that OPEN in its current form can be used to engineer ZFNs for a high percentage of zebrafish genes.
The reagents we used to construct and express ZFNs in our experiments are part of the OPEN Zinc Finger Consortium platform for engineering zinc finger arrays. Zinc finger arrays constructed by OPEN can be excised as XbaI/BamHI fragments and cloned directly into expression plasmids which then encode FLAG-tagged, NLS-tagged, obligate heterodimeric ZFNs. ZFN-encoding RNA can be directly transcribed from these plasmids using T7 RNA polymerase. OPEN Zinc Finger Consortium reagents are publicly available to academic laboratories through either Addgene (a non-profit plasmid distribution service; see http://www.addgene.org/zfc) or the Joung lab. All engineering and validation steps in the OPEN method are carried out in simple and inexpensive E. coli-based systems. Collectively, these reagents provide academics with an important platform which enables rapid engineering of ZFNs for zebrafish genes.
When compared with ZFNs previously made to the kdr gene using a bacterial one-hybrid-based method, OPEN ZFNs were equally efficient at inducing mutations at their respective target sites but showed less toxicity and teratogenesis, even when larger amounts of ZFN-encoding RNA were injected. (Others have also noted the relatively greater toxicity of the kdr ZFNs compared with the golden and ntl ZFNs made using the Sangamo BioSciences zinc finger engineering technology ,  although we note that those comparisons were made between experiments which used different ZFN expression vectors.) The difference in toxicity we observed between the kdr ZFNs and our OPEN ZFNs is most likely due to the quality of the zinc finger arrays because all other sequences in the expression vectors are otherwise identical. One possible explanation for the greater toxicity of the kdr ZFNs is that the B1H system used to create them might permit identification of zinc finger arrays with lower specificities than those identified by the OPEN B2H system. Consistent with this, we note that one of the zinc finger arrays (ZFP2) used to make the kdr ZFNs failed to activate transcription in the B2H system (Table 1) and therefore would not have been identified as a positive clone if the kdr site had been targeted using the OPEN method. This result suggests that the B1H method used to engineer the kdr zinc finger arrays may be less stringent than the B2H-based OPEN approach, perhaps due to the use of a multi-copy reporter in the B1H system as opposed to the single-copy reporter used in the B2H system. This difference might reduce the selective pressure for DNA-binding specificity since the target DNA site in the B1H system will be present at a higher concentration in the bacterial cell relative to the “non-specific” DNA of the E. coli chromosome. An important priority for future work will be to examine the spectrum and range of “off-target” sites altered by OPEN ZFNs, perhaps using methods previously described by other groups , .
The ability of OPEN to rapidly yield high quality ZFNs for a large number of different target sites should also improve prospects for using ZFNs to induce precise homologous recombination (HR) events at endogenous zebrafish genes. Repair of a ZFN-induced DSB by HR with an appropriately designed exogenous “donor template” (a process known as ZFN-induced gene targeting) has been used to introduce specific alterations or insertions with high efficiencies at endogenous genes in Drosophila , , plant [Townsend et al, manuscript submitted], and human cells –26, 43. However, our experience using ZFNs in human cells suggests that ZFN-induced homologous recombination can be much more challenging to implement than ZFN-induced mutagenic NHEJ-mediated repair. For example, not all ZFNs that can induce NHEJ at their target sites will necessarily promote efficient HR (M. Maeder, S. Beganny, and J.K. Joung, unpublished results). Thus, the ability to use the OPEN method to rapidly engineer ZFNs with both high activities and low toxicities for many different target sites should greatly enhance prospects for successfully using ZFNs to induce specific HR events in zebrafish.
Materials and Methods
OPEN selections of zinc finger arrays
Zinc finger arrays were selected using the OPEN method essentially as previously described  but with a small number of alterations that improve the speed and throughput of the protocol. We briefly summarize the overall protocol here with greater detail provided for steps of the protocol we altered for this report. A more detailed step-by-step protocol for performing OPEN selections is forthcoming (Maeder et al., manuscript in preparation) and is currently available upon request from the Joung lab.
To create recombinant libraries of zinc finger arrays for use in OPEN selections, zinc finger pools for target triplet subsites  were amplified by PCR using primers and conditions as previously described . Amplified finger pool products were purified on 10% polyacrylamide gels and then fused together by PCR to create random combinations of three-finger arrays. These fusion PCR reactions were performed with equal concentrations of the three purified finger pool fragments and using primers and cycling conditions as previously described . The resulting PCR product encoding a collection of three-finger arrays was purified on a 5% polyacrylamide gel and treated with Pfu polymerase and T4 polynucleotide kinase to create ligation-ready overhangs . This fragment was then ligated to pBR-UV5-GP-FD2 vector that had been digested with the restriction enzyme BbsI. The resulting plasmids express the collection of zinc finger arrays as FLAG-tagged Gal11P fusions in the B2H system. Electroporation was then used to introduce these ligation products into E. coli XL-1 Blue cells and >3×106 independent transformants were obtained for each library to ensure a minimum of three-fold oversampling of the theoretical library complexity of ~8.6×105 (953). Libraries were then converted into infectious M13 phage as previously described .
OPEN selections were performed in two stages. In the first stage, an OPEN three-finger library was introduced by infection into a B2H selection strain harboring the full target DNA sequence of interest. For the selections described in this report, we grew selection strains as 1 ml cultures in 24-well, 10 ml-capacity pyramidal well blocks in a Microtitertron shaker (Appropriate Technical Resources, Inc.) at 350 rpm, 37°C, 80% humidity. These cultures were grown in NM medium supplemented with 30 μg/ml chloramphenicol, 30 μg/ml kanamycin, and 50 μM IPTG. Following overnight growth, selection strain cultures were infected with a matched combinatorial zinc finger array phagemid phage library constructed as described above. Following phage infection, 4 ml of NM medium  supplemented with 30 μg/ml chloramphenicol, 30 μg/ml kanamycin, and 50 μM IPTG was added to the cells which were then shaken on the Microtitertron shaker for 1.5 hrs. The infected cells were then spun down and 4ml of the supernatant removed. The cell pellet was then resuspended in the remaining 1 ml of liquid media and 250 μl of this resuspension was plated on two different NM/CCK medium plates containing 50 μM IPTG, 10 mM 3AT, and 20 μg/mL streptomycin or 50 μM IPTG, 25 mM 3AT, and 40 μg/mL streptomycin. After 36–48 hours of incubation, colonies were harvested from the highest stringency plate yielding at least 1000 colonies as previously described . The resulting cell suspension was then diluted with 4.5 ml 2XYT media supplemented with 50 μg/ml carbenicillin and 30 μg/ml kanamycin to an OD600≈0.1 in the 10 ml-capacity well of a 24-well block and allowed to grow for 1 hour in the Microtitertron shaker as described above. This subculture was infected with 1011 kanamycin transducing units of M13K07 helper phage and then grown for six hours in the Microtitertron shaker. Phage-containing culture supernatants were harvested by filtering the cell cultures through a 0.22 μm polyethersulfone syringe filter.
In the second stage of OPEN selection, selection strain cells were again grown in 24-well blocks but in 1 ml of NM medium supplemented with 30 μg/ml chloramphenicol, 30 μg/ml kanamycin, and no IPTG. This overnight culture was infected with ~6×105 ampicillin-transducing units (ATUs) of zinc finger-encoding phagemid phage rescued from the initial stage of selection. Following infection, 400 μl of NM medium supplemented with 30 μg/ml chloramphenicol and 30 μg/ml kanamycin was added to the cells which were then shaken on the Microtitertron shaker for 1.5 hrs. 375 μl of this infected culture (corresponding to ~5×10−5 infected/transformed cells) was then plated on a square 100mm×100mm NM medium agar plate supplemented with 100 μg/ml carbenicillin, 30 μg/ml chloramphenicol, 30 μg/ml kanamycin and containing gradients of 3-aminotriazole (from 0 to 80 mM) and streptomycin (from 0 to 100 μg/ml). Gradient plates were poured as previously described .
Construction of ZFN expression vectors
DNA sequences encoding zinc finger arrays identified by OPEN were transferred to ZFN expression vectors by using the phagemids encoding these arrays as templates for PCR reactions using primers OK.1677 and OK.1678 (Supplemental Table 26). The resulting DNA fragments (encoding the zinc finger arrays) were digested with XbaI and BamHI and cloned into XbaI/BamHI-digested ZFN expression vectors pMLM335 or pMLM336 . The pMLM335 and pMLM336 vectors encode previously described obligate heterodimeric ZFNs . Final sequence-verified plasmids were prepared using a QIAgen HiSpeed Midiprep kit using RNase free reagents and stored in RNase-free Eppendorf Safe Lock Tubes.
Preparation of ZFN-encoding RNA
ZFN expression vectors were linearized with PmeI (an enzyme which cleaves just 3′ to the end of the ZFN coding sequence) and transcribed in vitro using the T7 mMessage mMachine kit (Ambion). The transcribed ZFN RNAs were then polyadenylated using the Poly(A) Tailing kit (Ambion).
Injection of zebrafish and analysis of somatic mutations
Approximately 2 nl of the ZFN RNA (at concentrations of 50–400 pg/nl) was injected into one-cell stage zebrafish embryos. Two days following fertilization, the surviving injected embryos were grouped into either “normal” or “deformed” phenotypes. Genomic DNA was extracted from pools of 4–12 embryos from each “normal” group using DNA extraction buffer (10 mM Tris, pH 8.0, 200 mM NaCl, 10 mM EDTA, 0.5% SDS, 100 μg/ml Proteinase K), followed by phenol/chloroform extraction and ethanol precipitation. The DNA was resuspended in 40 μl of TE (10 mM Tris, pH 8.0, 1 mM EDTA).
2.5 μl of the resulting genomic DNA was then used as template for a PCR reaction using Platinum Taq DNA Polymerase High Fidelity enzyme (Invitrogen) with primers designed to anneal approximately 150 to 200 bp upstream and downstream from the expected mutation. The resulting PCR product was cleaned up using a QIAGEN Minelute PCR purification kit and then ligated using a ZeroBlunt TOPO kit (Invitrogen) into linearized pCR4 Blunt-TOPO vector. The ligation was transformed into Mach1 T1-bacteriophage resistant E.coli (Invitrogen) and plated on LB plates containing 50 μg/ml kanamycin. Following incubation overnight at 37°C, colonies were picked from these plates and inoculated into 700 μl TB medium containing 50 μg/ml kanamycin in 96-well blocks with 1ml pyramidal-bottom wells. These blocks were shaken at 900 rpm, 37°C, and 80% humidity in a Microtitertron shaker. Plasmid DNA was isolated from these cultures and sent for sequencing using the “T3 sequencing” primer (Supplemental Table 26).
Identification and sequencing of germline transmitted mutations
Potential founders were crossed with wild-type zebrafish. One to three dpf (days post fertilization), progeny were lysed individually in lysis buffer (10 mM Tris, pH 8.0, 2 mM EDTA, 0.1% Triton X-100, 100 μg/ml Proteinase K) and incubated at 50°C overnight. For each target gene, 10–12 embryos from each potential founder were screened for the presence of ZFN-induced mutations by amplifying the region surrounding the relevant ZFN cleavage site by PCR and then using either restriction digest- and/or DNA sequencing-based assays: For the tfr2 gene, we used primers OK.1922 and OK.1923 to amplify the region surrounding the ZFN target site by PCR and the resulting ~405 bp product from each embryo was directly sequenced with primer Tfr2-seq (Supplemental Table 26). For the dopamine transporter gene, we used primers OK.1916 and OK.1917 (Supplemental Table 26) to amplify the region surrounding the ZFN target site by PCR and the resulting ~418 bp product was digested with the restriction enzyme ApeKI. The PCR product from a wild-type allele will yield 5 fragments of 251, 68, 52, 25 and 7-bp sizes. Introduction of indel mutations at the ZFN target site will cause disruption of the ApeKI site and result in the appearance of an additional 120-bp fragment which is detectable on a 3% agarose gel. PCR fragments from selected progeny that showed evidence for loss of the ApeKI site were blunt-end cloned into the pCR4 Blunt-TOPO vector as described above and sequenced with the “T3 sequencing” primer. For the telomerase gene, we used primers OK.1928 and OK.1930 (Supplemental Table 26) to amplify the surrounding region by PCR and the resulting ~306 bp product was digested with the enzyme BspHI. The PCR product from a wild-type allele will contain only one BspHI site. Introduction of indel mutations at the ZFN target site will disrupt the BspHI site thereby resulting in the generation of PCR products resistant to digestion by BspHI. PCR fragments from progeny that were resistant to BspHI were blunt-end cloned into the pCR4 Blunt-TOPO vector as described above and sequenced with the “T3 sequencing” primer. For the hifaa gene, we used primers OK.1934 and OK.1935 (Supplemental Table 26) to amplify the surrounding region by PCR and the resulting ~401 bp product was digested with the enzyme BfuAI. The PCR product from a wild-type allele will contain only one BfuAI site. Introduction of indel mutations at the ZFN target site will disrupt the BfuAI site thereby resulting in the generation of PCR products resistant to digestion by BfuAI. PCR fragments from progeny that were resistant to BfuAI were blunt-end cloned into the pCR4 Blunt-TOPO vector as described above and sequenced with the “T3 sequencing” primer.
Identification of potential OPEN ZFN target sites in zebrafish transcripts
ZFN target sites were generated from Danio rerio chromosomal contigs (Zv7) and gene table files (updated July 2008) from Ensemble (http://www.ensembl.org) for all mapped chromosomal protein coding transcripts. ZFN target sites were identified that can be targeted using currently available OPEN reagents  and that possess a spacer of 5, 6, or 7 nucleotides between the target half-sites. Only ZFN sites whose spacer falls entirely within an exon were identified as potential targets. In addition, because all previous 9 bp sites successfully targeted by OPEN to date have possessed at least one GNN triplet , we eliminated ZFN sites harboring one or more half-sites that are devoid of GNN triplets. Finally, because OPEN selections are performed in E. coli, ZFN sites containing either a dam or a dcm methylation site in either half-site were also eliminated from the target list.
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 1. Potential OPEN ZFN target sites within transcripts were identified as described in Materials and Methods. Gene ID and Transcript ID are from the Ensembl Danio rerio release 51 database. “Strand” indicates whether the “Target Site” shown (written 5′ to 3′) occurs on the forward (+) or reverse (−) strand. “ZFN Spacer Length” indicates the length of the spacer sequence located between the ZFN half-sites (5, 6, or 7 bps). “Coding Sequence Length” indicates the total nucleotide length of the coding sequence within the transcript and “ZFN Cleavage Site” indicates the nucleotide position of the cleavage site (i.e.–the first base of the “Target Site”) within the coding sequence.
(2.22 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 2. Data presented as described in the legend to Table S1.
(2.39 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 3. Data presented as described in the legend to Table S1.
(2.28 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 4. Data presented as described in the legend to Table S1.
(2.05 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 5. Data presented as described in the legend to Table S1.
(3.12 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 6. Data presented as described in the legend to Table S1.
(2.28 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 7. Data presented as described in the legend to Table S1.
(2.80 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 8. Data presented as described in the legend to Table S1.
(2.44 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 9. Data presented as described in the legend to Table S1.
(2.21 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 10. Data presented as described in the legend to Table S1.
(1.78 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 11. Data presented as described in the legend to Table S1.
(1.75 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 12. Data presented as described in the legend to Table S1.
(1.55 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 13. Data presented as described in the legend to Table S1.
(1.98 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 14. Data presented as described in the legend to Table S1.
(1.62 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 15. Data presented as described in the legend to Table S1.
(1.84 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 16. Data presented as described in the legend to Table S1.
(1.93 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 17. Data presented as described in the legend to Table S1.
(2.02 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 18. Data presented as described in the legend to Table S1.
(2.13 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 19. Data presented as described in the legend to Table S1.
(2.06 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 20. Data presented as described in the legend to Table S1.
(2.79 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 21. Data presented as described in the legend to Table S1.
(1.72 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 22. Data presented as described in the legend to Table S1.
(2.11 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 23. Data presented as described in the legend to Table S1.
(1.98 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 24. Data presented as described in the legend to Table S1.
(1.46 MB XLS)
Potential OPEN ZFN target sites in gene transcripts encoded on zebrafish chromosome 25. Data presented as described in the legend to Table S1.
(1.58 MB XLS)
Sequences of primers used in this study
(0.02 MB XLS)
Conceived and designed the experiments: JEF JRJY MLM DR JDS RTP JKJ. Performed the experiments: JEF JRJY MLM DR JDS. Analyzed the data: JEF JRJY MLM DR JDS RTP JKJ. Contributed reagents/materials/analysis tools: MLM DR JDS RTP JKJ. Wrote the paper: JEF JRJY JDS RTP JKJ.
- 1. Cathomen T, Joung JK (2008) Zinc-finger nucleases: the next generation emerges. Mol Ther 16: 1200–1207.
- 2. Porteus MH, Carroll D (2005) Gene targeting using zinc finger nucleases. Nat Biotechnol 23: 967–973.
- 3. Durai S, Mani M, Kandavelou K, Wu J, Porteus MH, et al. (2005) Zinc finger nucleases: custom-designed molecular scissors for genome engineering of plant and mammalian cells. Nucleic Acids Res 33: 5978–5990.
- 4. Carroll D (2008) Progress and prospects: Zinc-finger nucleases as gene therapy agents. Gene Ther.
- 5. Wu J, Kandavelou K, Chandrasegaran S (2007) Custom-designed zinc finger nucleases: what is next? Cell Mol Life Sci 64: 2933–2944.
- 6. Camenisch TD, Brilliant MH, Segal DJ (2008) Critical parameters for genome editing using zinc finger nucleases. Mini Rev Med Chem 8: 669–676.
- 7. Mani M, Smith J, Kandavelou K, Berg JM, Chandrasegaran S (2005) Binding of two zinc finger nuclease monomers to two specific sites is required for effective double-strand DNA cleavage. Biochem Biophys Res Commun 334: 1191–1197.
- 8. Kim YG, Cha J, Chandrasegaran S (1996) Hybrid restriction enzymes: zinc finger fusions to Fok I cleavage domain. Proc Natl Acad Sci U S A 93: 1156–1160.
- 9. Kim YG, Shi Y, Berg JM, Chandrasegaran S (1997) Site-specific cleavage of DNA-RNA hybrids by zinc finger/FokI cleavage domain fusions. Gene 203: 43–49.
- 10. Segal DJ, Barbas CF 3rd (2001) Custom DNA-binding proteins come of age: polydactyl zinc-finger proteins. Curr Opin Biotechnol 12: 632–637.
- 11. Beerli RR, Barbas CF 3rd (2002) Engineering polydactyl zinc-finger transcription factors. Nat Biotechnol 20: 135–141.
- 12. Isalan M, Choo Y (2001) Rapid, high-throughput engineering of sequence-specific zinc finger DNA-binding proteins. Methods Enzymol 340: 593–609.
- 13. Choo Y, Isalan M (2000) Advances in zinc finger engineering. Curr Opin Struct Biol 10: 411–416.
- 14. Jamieson AC, Miller JC, Pabo CO (2003) Drug Discovery with Engineered Zinc-Finger Proteins. Nature Reviews Drug Discovery 2: 361–368.
- 15. Pabo CO, Peisach E, Grant RA (2001) Design and selection of novel Cys2His2 zinc finger proteins. Annu Rev Biochem 70: 313–340.
- 16. Wolfe SA, Nekludova L, Pabo CO (2000) DNA recognition by Cys2His2 zinc finger proteins. Annu Rev Biophys Biomol Struct 29: 183–212.
- 17. Lee DK, Seol W, Kim JS (2003) Custom DNA-Binding Proteins and Artificial Transcription Factors. Curr Top Med Chem 3: 645–657.
- 18. Beumer K, Bhattacharyya G, Bibikova M, Trautman JK, Carroll D (2006) Efficient gene targeting in Drosophila with zinc-finger nucleases. Genetics 172: 2391–2403.
- 19. Bibikova M, Beumer K, Trautman JK, Carroll D (2003) Enhancing gene targeting with designed zinc finger nucleases. Science 300: 764.
- 20. Bibikova M, Golic M, Golic KG, Carroll D (2002) Targeted chromosomal cleavage and mutagenesis in Drosophila using zinc-finger nucleases. Genetics 161: 1169–1175.
- 21. Santiago Y, Chan E, Liu PQ, Orlando S, Zhang L, et al. (2008) Targeted gene knockout in mammalian cells by using engineered zinc-finger nucleases. Proc Natl Acad Sci U S A 105: 5809–5814.
- 22. Perez EE, Wang J, Miller JC, Jouvenot Y, Kim KA, et al. (2008) Establishment of HIV-1 resistance in CD4+ T cells by genome editing using zinc-finger nucleases. Nat Biotechnol 26: 808–816.
- 23. Moehle EA, Rock JM, Lee YL, Jouvenot Y, Dekelver RC, et al. (2007) Targeted gene addition into a specified location in the human genome using designed zinc finger nucleases. Proc Natl Acad Sci U S A 104: 3055–3060.
- 24. Lombardo A, Genovese P, Beausejour CM, Colleoni S, Lee YL, et al. (2007) Gene editing in human stem cells using zinc finger nucleases and integrase-defective lentiviral vector delivery. Nat Biotechnol 25: 1298–1306.
- 25. Urnov FD, Miller JC, Lee YL, Beausejour CM, Rock JM, et al. (2005) Highly efficient endogenous human gene correction using designed zinc-finger nucleases. Nature 435: 646–651.
- 26. Maeder ML, Thibodeau-Beganny S, Osiak A, Wright DA, Anthony RM, et al. (2008) Rapid “open-source” engineering of customized zinc-finger nucleases for highly efficient gene modification. Mol Cell 31: 294–301.
- 27. Meng X, Noyes MB, Zhu LJ, Lawson ND, Wolfe SA (2008) Targeted gene inactivation in zebrafish using engineered zinc-finger nucleases. Nat Biotechnol 26: 695–701.
- 28. Doyon Y, McCammon JM, Miller JC, Faraji F, Ngo C, et al. (2008) Heritable targeted gene disruption in zebrafish using designed zinc-finger nucleases. Nat Biotechnol 26: 702–708.
- 29. Woods IG, Schier AF (2008) Targeted mutagenesis in zebrafish. Nat Biotechnol 26: 650–651.
- 30. Hurt JA, Thibodeau SA, Hirsh AS, Pabo CO, Joung JK (2003) Highly specific zinc finger proteins obtained by directed domain shuffling and cell-based selection. Proc Natl Acad Sci U S A 100: 12271–12276.
- 31. Pearson H (2008) The Fate of Fingers. Nature 455: 160–164.
- 32. Mandell JG, Barbas CF, 3rd (2006) Zinc Finger Tools: custom DNA-binding domains for transcription factors and nucleases. Nucleic Acids Res 34: W516–523.
- 33. Bae KH, Do Kwon Y, Shin HC, Hwang MS, Ryu EH, et al. (2003) Human zinc fingers as building blocks in the construction of artificial transcription factors. Nat Biotechnol 21: 275–280.
- 34. Liu Q, Xia Z, Zhong X, Case CC (2002) Validated zinc finger protein designs for all 16 GNN DNA triplet targets. J Biol Chem 277: 3850–3856.
- 35. Wright DA, Thibodeau-Beganny S, Sander JD, Winfrey RJ, Hirsh AS, et al. (2006) Standardized reagents and protocols for engineering zinc finger nucleases by modular assembly. Nat Protoc 1: 1637–1652.
- 36. Ramirez CL, Foley JE, Wright DA, Muller-Lerch F, Rahman SH, et al. (2008) Unexpected failure rates for modular assembly of engineered zinc-fingers. Nat Methods 5: 374–375.
- 37. Isalan M, Klug A, Choo Y (1998) Comprehensive DNA recognition through concerted interactions from adjacent zinc fingers. Biochemistry 37: 12026–12033.
- 38. Isalan M, Choo Y, Klug A (1997) Synergy between adjacent zinc fingers in sequence-specific DNA recognition. Proc Natl Acad Sci U S A 94: 5617–5621.
- 39. Wolfe SA, Grant RA, Elrod-Erickson M, Pabo CO (2001) Beyond the “recognition code”: structures of two Cys2His2 zinc finger/TATA box complexes. Structure (Camb) 9: 717–723.
- 40. Elrod-Erickson M, Rould MA, Nekludova L, Pabo CO (1996) Zif268 protein-DNA complex refined at 1.6 A: a model system for understanding zinc finger-DNA interactions. Structure 4: 1171–1180.
- 41. Greisman HA, Pabo CO (1997) A general strategy for selecting high-affinity zinc finger proteins for diverse DNA target sites. Science 275: 657–661.
- 42. Wolfe SA, Greisman HA, Ramm EI, Pabo CO (1999) Analysis of zinc fingers optimized via phage display: evaluating the utility of a recognition code. J Mol Biol 285: 1917–1934.
- 43. Miller JC, Holmes MC, Wang J, Guschin DY, Lee YL, et al. (2007) An improved zinc-finger nuclease architecture for highly specific genome editing. Nat Biotechnol 25: 778–785.
- 44. Sander JD, Zaback P, Joung JK, Voytas DF, Dobbs D (2007) Zinc Finger Targeter (ZiFiT): an engineered zinc finger/target site design tool. Nucleic Acids Res 35: W599–605.
- 45. Kiermer V (2008) Fish fingers on the menu. Nat Methods 5: 579.
- 46. Thibodeau-Beganny S, Joung JK (2007) Engineering Cys2His2 Zinc Finger Domains Using a Bacterial Cell-Based Two-Hybrid Selection System. Methods in Molecular Biology 408: 317–334.
- 47. Fu F, Sander JD, Maeder M, Thibodeau-Beganny S, Joung JK, et al. (2009) Zinc Finger Database (ZiFDB): a repository for information on C2H2 zinc fingers and engineered zinc-finger arrays. Nucleic Acids Res 37: D279–283.