Figures
Abstract
Background
Clostridium botulinum produces seven distinct serotypes of botulinum neurotoxins (BoNTs). The genes encoding different subtype neurotoxins of serotypes A, B, F and several dual neurotoxin-producing strains have been shown to reside on plasmids, suggesting that intra- and interspecies transfer of BoNT-encoding plasmids may occur. The objective of the present study was to determine whether these C. botulinum BoNT-encoding plasmids are conjugative.
Methodology/Principal Findings
C. botulinum BoNT-encoding plasmids pBotCDC-A3 (strain CDC-A3), pCLJ (strain 657Ba) and pCLL (strain Eklund 17B) were tagged with the erythromycin resistance marker (Erm) using the ClosTron mutagenesis system by inserting a group II intron into the neurotoxin genes carried on these plasmids. Transfer of the tagged plasmids from the donor strains CDC-A3, 657Ba and Eklund 17B to tetracycline-resistant recipient C. botulinum strains was evaluated in mating experiments. Erythromycin and tetracycline resistant transconjugants were isolated from donor∶recipient mating pairs tested. Transfer of the plasmids to the transconjugants was confirmed by pulsed-field gel electrophoresis (PFGE) and Southern hybridizations. Transfer required cell-to-cell contact and was DNase resistant. This indicates that transfer of these plasmids occurs via a conjugation mechanism.
Conclusions/Significance
This is the first evidence supporting conjugal transfer of native botulinum neurotoxin-encoding plasmids in C. botulinum, and provides a probable mechanism for the lateral distribution of BoNT-encoding plasmids to other C. botulinum strains. The potential transfer of C. botulinum BoNT-encoding plasmids to other bacterial hosts in the environment or within the human intestine is of great concern for human pathogenicity and necessitates further characterization of these plasmids.
Citation: Marshall KM, Bradshaw M, Johnson EA (2010) Conjugative Botulinum Neurotoxin-Encoding Plasmids in Clostridium botulinum. PLoS ONE 5(6): e11087. https://doi.org/10.1371/journal.pone.0011087
Editor: Holger Bruggemann,
Received: January 13, 2010; Accepted: May 17, 2010; Published: June 11, 2010
Copyright: © 2010 Marshall et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Funding: This work was sponsored by the Food Research Institute of the University of Wisconsin-Madison and by the NIH/NIAID Regional Center of Excellence for Biodefense and Emerging Infectious Diseases Research (RCE) Program. The authors wish to acknowledge membership and support from the Pacific Southwest Regional Center of Excellence grant U54 AI065359 and from the Region V “Great Lakes” Regional center of Excellence (NIH award 1-U54-AI-057153). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Clostridium botulinum is classified as an anaerobic, gram-positive, sporeforming organism that produces an extraordinarily lethal toxin designated botulinum neurotoxin (BoNT). BoNTs are categorized into seven different serotypes listed A–G, and multiple subtype BoNTs have been discovered and continue to be identified, especially among serotypes A, B, E and F [1], [2], [3], [4], [5], [6].
This highly heterogeneous species of C. botulinum is divided into four groups based on metabolic, physiological and genetic properties [7]. Historically, these neurotoxigenic clostridia have been classified as C. botulinum based on their capacity to produce BoNTs, but many researchers believe that the four clades represent separate species of clostridia [2], [8], [9]. Group I contains proteolytic strains of serotypes A, B and F, whereas Group II encompasses nonproteolytic strains of serotypes B, E and F. Unlike proteolytic strains, nonproteolytic strains lack the ability to digest meat and milk proteins and rely on exogenous proteases for the proteolytic nicking of the neurotoxin into its active di-chain form [10]. C. botulinum serotype C and D strains are clustered in Group III and strains of C. botulinum serotype G, also referred to as Clostridium argentinense, are included in Group IV.
BoNT is the etiologic agent of botulism, a paralytic disease resulting from the inhibition of neurotransmitter release at the neuromuscular junction [11]. There are several forms of botulism, and infant and foodborne represent the majority of botulism cases reported in the U. S. [12]. Despite the unsavory reputation of BoNTs as a deadly poison and as a potential bioterrorism agent, their use in treatment for numerous hyperactive muscle disorders has been widely demonstrated [13].
Although the genes encoding BoNTs of serotypes C, D and G have been established to be associated with extrachromosomal elements [14], [15], the location of genes encoding serotypes A, B, E and F were believed to be located on the chromosome from earlier analyses of total genomic DNA [16]. Recently, strains of serotype A, proteolytic and nonproteolytic strains of serotype B, and dual neurotoxin-producing Ba, Ab and Bf strains have been shown to harbor neurotoxin genes on very large plasmids [6], [17], [18]. Interestingly, in dual neurotoxin-producing strains of Ba, Ab and Bf subtypes analyzed thus far, it appears that both neurotoxin genes are usually located on the same plasmid [6], [18]. Plasmids identified in proteolytic strains of C. botulinum range in size from ∼150 to 270 kb and several plasmids found in serotypes A and B and dual neurotoxin producing Ba and Bf strains have been shown to be highly conserved, yet they carry different neurotoxin subtype genes [6], [8]. BoNT-encoding plasmids seem to be more prevalent among strains of serotype B than other serotypes [6], [18], [19]. Unlike the large plasmids observed in proteolytic serotype B strains, plasmids found in nonproteolytic B strains are consistently smaller (∼48 kb) and share no homology with plasmids of proteolytic C. botulinum strains [6], [8].
These observations led to the hypothesis that BoNT-encoding plasmids are the likely vehicles for the dissemination of neurotoxin genes and are possibly transmissible at least between strains of C. botulinum and perhaps to strains of closely related clostridial species such as C. baratii and C. butyricum. Isolates of C. baratii and C. butyricum have been found to produce BoNT/F and BoNT/E respectively [12], but how these strains acquired the neurotoxin genes is presently unknown.
To test the hypothesis that C. botulinum plasmids are transmissible, the BoNT-encoding plasmids pBotCDC-A3 (proteolytic subtype A3 strain CDC-A3), pCLJ (proteolytic subtype A4/bivalent B strain 657Ba) and pCLL (nonproteolytic serotype B strain Eklund 17B) were tagged using the ClosTron mutagenesis system [20], [21]. The BoNT/A3 subtype gene, bont/A3 (pBotCDC-A3), the bivalent BoNT/B gene, bont/bvB (pCLJ), and the nonproteolytic BoNT/B gene bont/npB (pCLL) were insertionally inactivated by insertion of the group II intron containing the erythromycin resistance marker. The tagged plasmids were used in mating experiments with the recipient C. botulinum strain LNT01. C. botulinum strain LNT01 is a transposon Tn916 mutant of the parent C. botulinum subtype A1 strain 62A [22], [23]. Upon integration of the transposon the BoNT/A1 neurotoxin gene cluster and regions flanking the cluster were deleted resulting in a nontoxigenic C. botulinum strain that carries the tetracycline resistance determinant. In this study we report the first demonstration of native BoNT-encoding plasmid transfer from an A3 subtype strain, an A4/bivalent B subtype strain and a nonproteolytic serotype B strain to a nontoxigenic mutant of a subtype A1 strain.
Results
Plasmids carrying neurotoxin genes have been identified in some proteolytic and nonproteolytic C. botulinum strains of serotypes A and B, and in bivalent subtypes Ba, Bf and Ab [6], [8], [17], [18], [24]. We hypothesize that BoNT-encoding plasmids are capable of intra- and interspecies transfer, since they are present in a variety of proteolytic and nonproteolytic C. botulinum strains. To test our hypothesis that C. botulinum BoNT-encoding plasmids are transmissable, mating experiments were conducted between donors harboring a BoNT-encoding plasmid and a nontoxigenic C. botulinum strain LNT01 as the recipient. C. botulinum strains CDC-A3 and 657Ba, which harbor large plasmids, pBotCDC-A3 (267 kb) and pCLJ (270 kb), respectively, were selected as donors to represent proteolytic strains. As a representative of nonproteolytic C. botulinum serotype B, strain Eklund 17B containing plasmid pCLL (48 kb) was chosen as a donor strain. The recipient strain LNT01 was selected because it is nontoxigenic, and it contains a tetracycline resistance marker due to presence of the transposon Tn916 on the genome [22], [23]. To ascertain transfer of BoNT-encoding plasmids from the donor to the recipient strain, the plasmids were tagged with an erythromycin resistance gene using the ClosTron mutagenesis system. Thus, positive selection of transconjugants was facilitated by the presence of the tetracycline resistance determinant in combination with erythromycin resistance provided by the tagged plasmids.
Plasmid tagging using ClosTron
The neurotoxin genes, bont/A3 of plasmid pBotCDC-A3 (strain CDC-A3), bont/bvB of plasmid pCLJ (657Ba), and bont/npB of plasmid pCLL (strain Eklund 17B) were insertionally inactivated using the ClosTron mutagenesis system [20], [21]. The potential intron target sites within each neurotoxin gene were identified using the computer algorithm at the group II intron (TargeTron) design site provided by Sigma-Aldrich (St. Louis, MO). The target sites chosen for bont/A3, bont/bvB and bont/npB were between nucleotides 580 and 581, 381 and 382, and 420 and 421 on the sense strands, respectively. Each re-targeted intron was amplified by PCR and cloned into the ClosTron vector pMTL007C-E2 between restriction sites HindIII and BsrGI [21] resulting in constructs, pMTL007C-E2:Cbo:bont/A-580s, pMTL007C-E2:Cbo:bont/bvB-381s, and pMTL007C-E2:Cbo:bont/npB-420s. The constructs were transferred to their respective wild-type strains CDC-A3, 657Ba and Eklund 17B by conjugation from the E. coli donor strain CA434. Following matings, the cells were plated onto agar containing thiamphenicol to select for C. botulinum clones harboring the ClosTron vector. Thiamphenicol resistant transconjugants of C. botulinum containing the ClosTron vector were then plated onto agar supplemented with erythromycin for selection of intron integrants, since the erythromycin resistance gene is restored upon integration of the group II intron [20], [21]. Next, erythromycin resistant clones were screened for the loss of the intron vector by replica plating, then erythromycin resistant and thiamphenicol sensitive clones were selected and further analyzed by PCR to determine whether the intron had integrated into its desired target site. The gene specific PCR primers (Table 1) were designed to anneal to regions flanking the insertion site for each neurotoxin gene in order to amplify the entire insertion element. Insertion of the re-targeted introns into either the bont/A3, bont/bvB or bont/npB genes was confirmed by PCR analysis (Fig. 1). PCR amplification of the DNA from the wild type CDC-A3 strain using the bont/A3 gene specific primers A3KMCT1 and A3KMCT2 produced a PCR product of 1,264 bp (Fig. 1, Lane 1), whereas a DNA fragment of 3,044 bp was observed in the CDC-A3 transconjugant clones analyzed (Fig. 1, Lanes 2 and 3), indicating integration of the intron element (∼1.8 kb) into the target gene. Similarly, amplification of the 657Ba and Eklund 17B transconjugant clones (Fig. 1 Lanes 5 and 6, and Lanes 8 and 9, respectively) using bont/bvB and bont/npB gene specific primers yielded expected PCR products that exhibited an ∼1.8 kb increase in size compared to the PCR fragments generated from the wild type 657Ba (Fig. 1, Lane 4) and Eklund 17B (Fig. 1, Lane 7). These results confirmed that the re-targeted introns containing the erythromycin resistance determinant ermB were inserted into the bont/bvB and bont/npb (Fig. 1). Furthermore, the PCR fragments amplified from the tagged BoNT-encoding plasmids were sequenced and it was confirmed that the introns had inserted correctly into the chosen target sites within the neurotoxin genes in all three plasmids.
PCR products of wild-type C. botulinum strains CDC-A3 (Lane 1), 657Ba (Lane 4) and Eklund 17B (Lane 7) and two erythromycin resistant, thiamphenicol sensitive clones of each of CDC-A3 (Lanes 2 and 3), 657Ba (Lanes 5 and 6) and Eklund 17B (Lanes 8 and 9) strains; 1 kb Plus ladder (Invitrogen) (Lane M).
To verify that the plasmids were tagged, pulsed-field gel electrophoresis (PFGE) of nondigested DNA samples from the wild type strains CDC-A3, 657Ba and Eklund 17B, and the clones carrying the tagged plasmids pBotCDC-A3-Erm, pCLJ-Erm and pCLL-Erm, was performed followed by Southern hybridization analyses using probes specific to ermB and the respective neurotoxin genes. Hybridization signals were observed with the plasmid bands in all strains using the neurotoxin gene probes (Fig. 2). Hybridization of the ermB probe was detected with the tagged plasmid clones but not with the wild type strains, indicating that the plasmids were successfully tagged with the ErmB-RAM. The resultant strains with their tagged plasmids CDC-A3580s1 (pBotCDC-A3-Erm), 657BaCT4 (pCLJ-Erm) and Eklund 17BCT11 (pCLL-Erm) were used as the donors in the mating experiments.
(B) Ethidium bromide stained PFGE of nondigested DNA samples from C. botulinum strains: wild type CDC-A3 (Lane 1), CDC-A3580s1 (Lane 2), wild type 657Ba (Lane 3), 657Ba-CT4 (Lane 4), wild type Eklund 17B (Lane 5) and Eklund17B-CT11 (Lane 6); Lambda PFG Marker (Lane M), (New England Biolabs). The position of BoNT-encoding plasmids is indicated with arrows. (A) Southern hybridization with the bont/A3 probe (Lanes 1 and 2); the bont/bvB probe (Lanes 3 and 4) and the bont/npB probe (Lanes 5 and 6); (C) Southern hybridization with the ermB probe. PFGE conditions: 6V/cm, 12°C, 1–20 s pulse time, 24 h.
Mating experiments
Separate mixed plate matings between each donor strain, CDC-A3580s1 (pBotCDC-A3-Erm), 657BaCT4 (pCLJ-Erm), and Eklund 17BCT11 (pCLL-Erm) and recipient strains LNT01 and Hall A-hyper/Tn916 mutant were performed inside an anaerobic chamber on solid 4% agar TYG media for 12 h. Initially, strain LNT01 was used as the recipient to determine if plasmids pBotCDC-A3-Erm, pCLJ-Erm, and pCLL-Erm could be transferred to a recipient C. botulinum strain. Several mating experiments were performed to optimize the mating conditions to establish the transfer frequencies. Since similar transfer frequencies were observed when matings were performed for 12 or 24 h (data not shown); all subsequent bacterial mating experiments were incubated for 12 h. The mating pairs between proteolytic strains were performed at their optimal growth temperature of 37°C. Matings of the nonproteolytic serotype B donor strain Eklund 17BCT11 and the recipient strain LNT01 were performed at 30°C, which is the optimal growth temperature for nonproteolytic C. botulinum strains, since higher transfer frequencies were observed at this temperature (data not shown). Three different donor to recipient ratios (5∶1, 1∶1 and 1∶5) were tested, the donor∶recipient (D∶R) ratio of 1∶1 yielded the highest transfer frequencies. After the mating conditions were established in LNT01 the same experimental parameters were used to evaluate the transfer frequencies of C. botulinum plasmids into C. botulinum strain Hall A-hyper/Tn916 mutant.
Transconjugants were selected by plating the mating mixtures onto TYG agar supplemented with erythromycin (selection of Erm-plasmid) and tetracycline (selection of recipient strain LNT01 or Hall A-hyper/Tn916. To determine the number of donors and recipients the mating mixtures were also plated onto TYG containing either erythromycin (donors) or tetracycline (recipients). The number of donor cells and recipients varied with respect to the mating pairs (Table 2). The transfer frequency was calculated as the number of transconjugants per recipient or donor depending on which strain had the highest CFU/ml.
The transfer frequency values are displayed in Table 2. Overall, the plasmid transfer frequencies were lower than those reported for plasmids found in strains of Clostridium perfringens [25], [26], [27]. The conjugation frequencies for pBotCDC-A3-Erm and of pCLJ-Erm increased markedly when Hall A-hyper/Tn916 was used as the recipient. Similar conjugation frequencies of plasmid pCLL from the nonproteolytic strain Eklund 17B were observed when either strain LNT01 or Hall A-hyper/Tn916 was used as recipient (Table 2).
Pre-incubation of the donor cells with DNaseI, by combined addition of DNaseI to the agar medium and to the mating mixtures did not inhibit plasmid transfer, and the transfer frequencies were similar to that of matings in which DNaseI was not added. Furthermore, no transductants were obtained in matings performed with the filtered culture supernatants of each donor strain and the whole cell culture of the recipient strain LNT01. Importantly, no transconjugants were obtained when matings were performed in which the donors and recipients were separated by a 0.45 µm nitrocellulose membrane.
Confirmation of BoNT-encoding plasmid transfer
PFGE was performed using nondigested samples and samples digested with restriction enzymes designed to linearize each BoNT-encoding plasmid. PFGE analysis of digested samples allowed us to use the unique restriction banding patterns of the strains as a genetic screen to visually determine whether the plasmids were transferred to the recipient strains. PFGE analyses of the recipient LNT01, donor strains and LNT01 transconjugants from three separate matings are shown in Figures 3–5. LNT01 (recipient), wild type and plasmid-tagged donor strains, and three clones of each transconjugant all exhibited unique restriction banding patterns when digested with SmaI, XhoI or NarI. PFGE followed by Southern hybridization analyses using the ermB probe (intron probe) and the appropriate neurotoxin gene probes showed that the tagged plasmids were transferred to the recipient strains (Figures 3–5).
(A) Ethidium bromide stained PFGE of C. botulinum DNA samples: SmaI digested DNA of C. botulinum strain LNT01 (Lanes 1 and 7), CDC-A3 wild type (Lanes 2 and 8), CDC-A3580s1 (Lanes 3 and 9), and LNT01 transconjugants (pBotCDC-A3-Erm) (Lanes 4–6 and 10–12); Lanes 1–6, nondigested DNA samples; Lanes 7–12, SmaI digested DNA samples. Lambda PFG Marker (Lane M), New England Biolabs. The position of the pBotCDC-A3 plasmid is indicated with an arrow. Southern hybridization with: (B) the ermB probe, and (C) the bont/A3 probe. PFGE conditions: 6V/cm, 12°C, 1–26 s pulse time, 24 h.
(A) Ethidium bromide stained PFGE of C. botulinum strains: LNT01 (Lanes 1 and 7), wild type strain 657Ba (Lanes 2 and 8); 657BaCT4 (Lanes 3 and 9) and LNT01 transconjugants (pCLJ-Erm) (Lanes 4–6 and 10–12); Lanes 1–6, nondigested DNA samples; Lanes 7–12, XhoI digested DNAsamples. Lambda PFG Marker (Lane M), New England Biolabs. The position of the pCLJ plasmid is indicated with an arrow. Southern hybridization with: (B) the ermB probe and (C) the bont/bvB probe. PFGE conditions: 6V/cm, 12°C, 1–26 s pulse time, 24 h.
(A) Ethidium bromide stained PFGE of C. botulinum strains: LNT01 (Lanes 1 and 7), wild type strain Eklund 17B (Lanes 2 and 8); Eklund 17BCT11 (Lanes 3 and 9) and LNT01 transconjugants (pCLL-Erm) (Lanes 4–6 and Lanes10–12). Lanes 1–6, nondigested DNA samples; Lanes 7–12, NarI digested DNA samples. Lambda PFG Marker (Lane M), New England Biolabs. The position of the pCLL plasmid is indicated with an arrow. Southern hybridization with: (B) the ermB probe, and (C) the bont/npB probe. PFGE conditions: 6V/cm, 12°C, 1–20 s pulse time, 24 h.
Transfer of pBotCDC-A3-Erm from CDC-A3 (donor) to LNT01 (recipient) is shown in Fig. 3. When PFGE is performed on nondigested C. botulinum DNA samples most of the DNA remains trapped in the wells because large circular DNA molecules that are nicked or enzymatically relaxed fail to enter the gel matrix [28]. Linear forms of plasmids are able to migrate through the gel to a position which corresponds to their linear size relative to a reference marker [28]. In addition, a small portion of sheared chromosomal DNA migrating a short distance from the well position is frequently observed in PFGE analysis of nondigested clostridial DNA [17]. The DNA restriction banding pattern of the wild type strain LNT01 (lane 7A) digested with SmaI was identical to that of the transconjugants (lanes 10–12A), except that the banding pattern of all transconjugant clones contained an additional band of ∼270 kb. This band corresponds by size to the plasmid, pCDC-A3-Erm in the donor strain (A-lanes 2, 3 and 8, 9). This ∼270 kb band observed in digested (lanes 10–12) and nondigested (lanes 4–6) samples of the transconjugants hybridized with both bont/A3 (C: lanes 4–6, 10–12) and ermB probes (B: lanes 4–6, 10–12). These results confirmed the transfer of the tagged plasmid containing the intron interrupted bont/A3 gene. The same plasmid band in the donor strains hybridized with the bont/A3 probe (C: lanes 2, 3, 8, 9), but only the tagged donor hybridized with the ermB probe (B: lanes 3 and 9). No hybridization signals were detected with either probe in the recipient strain LNT01. PFGE of digested samples of the transconjugant and donor strains (A: lanes 8–12) showed an increase in the intensity of the ∼270 kb band in the ethidium bromide stained gel as well as produced stronger hybridization signals with the neurotoxin gene (C: lanes 8–12) and ermB (B: lanes 9–12) probes, while the hybridization signals at the well positions decreased. This indicated that the plasmid was linearized by the restriction enzyme and migrated into the gel.
Similarly, transfer of the ∼270 kb plasmid, pCLJ-Erm, from the donor strain 657BaCT4 to LNT01 (Fig. 4), and the ∼48 kb plasmid, pCLL from Eklund 17BCT11 to LNT01 was confirmed (Fig. 5). Furthermore, transfer of plasmids pBotCDC-A3-Erm, and pCLJ-Erm to Hall A-hyper/Tn916 was also confirmed by PFGE and Southern hybridization analyses (Fig. 6).
(A) Ethidium bromide stained PFGE of C. botulinum strains: wild type Hall A-hyper (Lane 1), Hall A-hyper/Tn916 mutant (Lane 2); Hall A-hyper/Tn916/pBotCDCA3-Erm (Lane 3); CDC-A3 plasmid-cured (Lane 4); wild type CDC-A3 (Lane 5). (D) Ethidium bromide stained PFGE of C. botulinum strains: wild type Hall A-hyper (Lane 6), Hall A-hyper/Tn916 mutant (Lane 7); Hall A-hyper/Tn916/pCLJ-Erm (Lanes 8 and 9); 657Ba-CT4 (Lane 10); wild type Hall A-hyper (Lane 11). Nondigested DNA and SmaI digests were loaded on the gels as indicated below the lanes. Lambda PFG Marker (Lane M), New England Biolabs. The position of the pBotCDC-A3 and pCLJ plasmids is indicated with arrows. Southern hybridization with: (B and E) the ermB probe; and (C and F) the tet probe. PFGE conditions: 6V/cm, 12°C, 1–26 s pulse time, 24 h.
Plasmid Alignments
The genome alignment tool Mauve [29] was used to generate global alignments of C. botulinum plasmid pCLL (strain Eklund 17B) and C. perfringens plasmid pCP13 (strain 13). Alignment of plasmids pCLL and pCP13 (Fig. 7) revealed 16 locally collinear blocks (LCBs) with at least some portion of them found in pCP13. The LCB shown in gold (Fig. 7) encompassed a region of 11 ORFs which exhibited the highest degree of sequence homology with similar ORFs found on plasmid pCP13. Mauve was also used to generate global alignments of pCLL and C. perfringens plasmids pCW3, pCP8533etx, and two contigs of C. perfringens type D strain JGS1721 (gcontig_1108490430283 and gcontig_1108490430999). The alignments revealed several locally collinear blocks (LCBs) with at least some portion of them found in the C. perfringens plasmids (Fig. 8). Two neighboring LCBs shown in green and blue were of particular interest because they shared homology with the conjugative C. perfringens plasmids. The region that contained the tcp locus common to C. perfringens conjugative plasmids is represented by the LCB colored blue (Fig. 8). The corresponding blue LCB observed in pCLL shares some sequence homology with this region as indicated in Fig. 8, however this region is truncated. The green LCB of plasmid pCLL contains a gene that encodes for a putative type IV secretion system protein VirD4 (pCLL_0005). Comparison of homologous ORFs of pCLL and C. perfringens plasmids is presented in Table 3.
The alignment has two panels, one for each complete plasmid: pCP13 [top position] and pCLL [bottom position]. The top portions of the panels are composed of colored segments corresponding to the boundaries of locally collinear blocks (LCBs) with lines connecting the homologous blocks in each plasmid. LCBs below a plasmid's centerline are in the reverse complement orientation relative to the reference plasmid (pCP13). The lower portion of the panels represent the predicted open reading frames (ORFs) for the corresponding segments of double stranded DNA with ORFs on top representing top strand and below (bottom strand).
The alignment has five panels, one for each plasmid. The top portions of the panels are composed of colored segments corresponding to the boundaries of locally collinear blocks (LCBs) with lines connecting the homologous blocks in each plasmid. LCBs below a plasmid's center line are in the reverse complement orientation relative to the reference plasmid (pCLL).
Discussion
Early studies attempting to demonstrate plasmid-associated BoNT genes were unsuccessful, except for discovery of the plasmid-borne BoNT/G gene [15]. The recent finding of plasmids in C. botulinum serotypes A and B housing BoNT/A, BoNT/B or both BoNT/A and BoNT/B genes [17], [24] prompted surveys of serotype B strains [18], [19] and dual neurotoxin C. botulinum strains producing subtypes Bf, Af and Ab BoNTs [6], [18]. These studies have invigorated interest in the field of plasmid biology in C. botulinum. The primary hypothesis of the present study was to determine whether the plasmids encoding BoNT can be transferred to other C. botulinum strains.
Here, we have demonstrated the transfer of the native BoNT-encoding plasmids pBotCDC-A3 and pCLJ from two proteolytic strains, and pCLL from a nonproteolytic strain, to other proteolytic C. botulinum strains. Our data strongly supports that the mechanism of plasmid transfer is conjugation. Transductants were not obtained when the recipient cells were incubated with filtered donor culture supernatants, supporting that bacteriophages were not involved in BoNT gene transfer. Furthermore, since BoNT gene transfer was not inhibited by the addition of DNaseI, and no transconjugants were obtained during matings in which the donor and recipient cells were separated by a 0.45 µm filter, we conclude that cell-to-cell contact is required for the transfer of these plasmids. Hence, plasmid transfer appears to be due to conjugation or a conjugation-like mechanism rather than by transformation.
Prior to this study, C. perfringens was the only Clostridium described to harbor plasmids capable of intraspecies conjugative transfer [25], [26], [27], [30], [31]. In this study, conjugative transfer of plasmid pCLL from the nonproteolytic C. botulinum serotype B strain Eklund 17B to a proteolytic C. botulinum strain, supports interspecies transfer since proteolytic and nonproteolytic groups have long been considered to comprise different Clostridium species based on different genomic, genotypic and phenotypic characteristics [2], [9].
Intraspecies conjugal transfer of plasmids in C. perfringens has been reported to be a highly efficient process with conjugation frequencies of 10−1 to 10−2 transconjugants per donor [25], [26], [27]. Conversely, the conjugation frequencies for the C. botulinum plasmids tested in this study were much lower ranging from 10−5 to 10−8 (Table 2). C. botulinum strain LNT01 was initially selected as a recipient, since it is nontoxigenic and contained the tetracycline resistance marker for positive selection of transconjugants. Although each of the plasmids was successfully transferred to LNT01, we observed a decrease in the number of donor cells during matings. For example, an approximately 4-log reduction in the number of CFU/ml of donors CDC-A3580s1 and 657BaCT4-2 was observed during matings with LNT01. A possible explanation may be that strain LNT01 produces a bacteriocin (unpublished data) that could inhibit the growth or kill the donor cells. C. perfringens strain F4969 was also reported to produce a bacteriocin which interfered with the transfer of plasmid pMRS4969 from this strain to the recipient C. perfringens strain because the bacteriocin greatly inhibited or killed the recipient cells [27]. Interestingly, only a 1–2 log reduction of donor (CFU/ml) was observed when the nonproteolytic C. botulinum strain Eklund 17BCT11 was used as the donor. To further investigate if a plasmid-endoded bacteriocin affected transfer efficiencies, another C. botulinum strain (Hall A-hyper/Tn916) that does not contain any plasmids nor a plasmid encoded-bacteriocin similar to those identified in C. botulinum strains ATCC 3502 (Acc. No. AM412318) [32] and 213B [33], was tested as a recipient. The plasmid transfer frequency of pCLJ and pBotCDC-A3 into Hall A-hyper/Tn916 increased by at least a log compared to that of LNT01 as a recipient while the transfer frequency of pCLL from the nonproteolytic strain Eklund 17B was similar when both recipients were tested (Table 2). Further studies are required to elucidate the factors and mechanisms affecting conjugal transfer and recipient stability of BoNT-encoding plasmids.
C. botulinum strain CDC-A3 is identical to strain Loch Maree based on MLST [34] and PFGE analyses [6], and it is highly likely that the plasmids are identical in both strains. The nucleotide sequences of pCLK (strain Loch Maree, A3), pCLJ (strain 657Ba, A4) and pCLL (strain 17B) genome sequences have been deposited in GenBank [24]. Although plasmids pCLK and pCLJ share significant sequence homology, the sequence of plasmid pCLL is unrelated to pCLJ and pCLK [6], [8]. Detailed sequence analysis of the botulinum gene clusters of plasmids pCLK and pCLJ have been performed, but little emphasis has been given to the functions of other plasmid genes [24]. Most of the ORFs of these plasmids are described as putatively encoding hypothetical or conserved hypothetical proteins. The mechanism for plasmid replication is unknown, because gene homologues involved in typical rolling-circle or theta replication have not been identified on these plasmids [24]. Similarly, the mechanism of plasmid transfer is also unknown, but genes homologous in plasmids pCLK and pCLJ that may be involved in plasmid transfer are suggested by the genome annotations. For example, TraK analogs (CLK_A0294; CLJ_A0213) and TraG/D (CLK_A0293; CLJ_A0212) flanked by hypothetical ORFs, as well as genes that encode for putative type II and type IV secretion system proteins, such as pili, have been described.
Plasmid pCLL of nonproteolytic C. botulinum serotype B strain Eklund 17B is ∼48 kb in size and contains 54 putative ORFs. As mentioned above pCLL does not exhibit homology with sequenced plasmids in proteolytic C. botulinum strains. Therefore, homology searches of pCLL were performed with genome sequences of other clostridial species. Initially, a nucleotide sequence alignment of pCLL with pCP13 of C. perfringens strain 13 was performed using Mauve. Surprisingly, this analysis identified regions of homology between pCLL and pCP13, which are graphically displayed as colored locally collinear blocks (LCBs) (Fig. 7). More detailed BLAST analyses revealed eleven ORFs within the gold-colored LCB (CLL_0004 to CLL_0017) with a range of identity from 34 to 67% with ORFs of plasmid pCP13 (Table 3). However, the function(s) of the identified ORFs in both plasmids is unknown, because these putative gene products are described as hypothetical or conserved hypothetical proteins. Considering that pCP13 is not a conjugative plasmid, further sequence analyses were performed between pCLL and completed sequences of conjugative C. perfringens plasmids and draft genome sequences of several C. perfringens strains.
Interestingly, two conjugative C. perfringens plasmids pCW3 and pCP8533etx as well as two contigs representing potential plasmids in a type D strain were identified by Mauve to contain regions homologous to pCLL (Fig. 8). Mauve revealed two LCBs colored green and blue, which represented regions of pCLL homologous to the C. perfringens nucleotide sequences. The blue LCB encompassed the tcp (transfer of clostridium plasmids) locus common to conjugative C. perfringens plasmids [31]. Although plasmid pCLL does not seem to contain the entire tcp locus it does carry genes that encode for proteins that exhibit 61% (CLL_0011) identity to TcpG (CPC_A0146 of C. perfringens C strain JGS1495) [31]. The ORF pCLL_0005 (a putative VirD4 homolog) in the green LCB showed 51% identity to CJD_A0258 (a putative VirD4 component) of C. perfringens type D strain JGS 1721. Further BLAST analyses revealed that C. perfringens type D strain JGS 1721 contained several ORFs with identities ranging from 37%–51% with ORFs of pCLL (Table 3). C. perfringens type D strains carry several plasmids ranging in size from ∼48 to 110 kb. These strains produce both alpha-toxin (plc gene) and epsilon-toxin (etx gene). The epsilon toxin is ranked third in potency following BoNTs and tetanus neurotoxin [35]. C. perfringens type D strains that produce alpha-toxin and epsilon-toxins, but not the enterotoxin (cpe gene) or the beta 2 toxin (cpb2 gene) have been reported to carry the etx gene on a plasmid of ∼48 kb [36]. The etx plasmid in C. perfringens type D strain JGS 1721 also contains the tcp locus [36]. The draft genome sequence of C. perfringens strain JGS 1721 consists of 221 contigs. The pCLL ORFs shared homology with 16 and 8 ORFs within two of these contigs, gcontig_1108490430999 and gcontig_1108490430283, respectively. Interestingly, gcontig_1108490430283 carries the genes that encode for etx and the tcp locus.
Overall, homology searches revealed that BoNT-encoding plasmid pCLL of the nonproteolytic C. botulinum strain exhibited some degree of homology with both conjugative and nonconjugative plasmids in C. perfringens. These results are interesting from an evolutionary perspective, and may warrant further studies on horizontal gene transfer in pathogenic clostridial species.
The presence of BoNT genes on conjugative plasmids in both proteolytic and nonproteolytic strains of C. botulinum is highly significant and could facilitate the dissemination of neurotoxin genes to other species of clostridia. It is conceivable that BoNT-encoding plasmids were involved in the transfer of BoNT/E and BoNT/F genes to C. butyricum and C. baratii. Studies have shown that C. butyricum does not possess BoNT-encoding plasmids [37], but considering the suggested mobility of the neurotoxin gene clusters [8], [18], [24], plasmids could be utilized by the organism to mobilize the neurotoxin gene cluster into another bacterial host. Whether or not the plasmid backbones are integrated into the newly acquired host or simply lost is unknown and requires further investigation.
In summary, this study demonstrates for the first time the conjugative transfer of proteolytic and nonproteolytic C. botulinum plasmids encoding BoNT genes to other proteolytic C. botulinum strains. This work is highly significant in the evolution of pathogenesis of clostridia. Since BoNT is the most potent toxin known, BoNT gene transfer to other bacteria could lead to the generation of new pathogens of high impact, such as emergence of new BoNT-forming clostridia with resistant phenotypes, and strains with higher spore heat resistance than C. botulinum. The finding that pCLL of the nonproteolytic C. botulinum serotype B strain contains gene regions that are homologous with plasmids in C. perfringens is intriguing and illustrates the potential transfer of plasmids to other clostridial species. Further work is needed to elucidate the molecular mechanisms of BoNT-encoding plasmid transfer, their maintenance, and gene expression. The study of the population dynamics of plasmid dissemination to other bacterial hosts in the environment or the human and animal intestine is of concern to human and animal pathogenesis and warrants further study.
Materials and Methods
Bacterial Strains
Proteolytic Clostridium botulinum strains CDC-A3 (BoNT subtype A3), 657Ba (subtype A4/bivalent B), LNT01 (nontoxigenic, subtype A1), Hall A-hyper (subtype A1) and nonproteolytic C. botulinum serotype B strain Eklund 17B were obtained from the Johnson laboratory culture collection. C. botulinum strain CDC-A3 was originally obtained from the Centers for Disease Control and Prevention (CDC) (Atlanta, GA). MLST and PFGE analyses indicated it was genetically identical to subtype A3 strain Loch Maree [34]. C. botulinum strain 657Ba was isolated from a case of infant botulism in 1976 [38]. C. botulinum strain Eklund 17B was isolated from marine sediments off the coast of Washington [39]. C. botulinum strain LNT01 is a nontoxigenic Tn916 mutant of the parent strain 62A (subtype A1) [22], [23]. Hall A-hyper is a well- characterized subtype A1 strain, which produces high quantities of BoNT/A1 [40]. Escherichia coli strains DH10B and CA434 were used for cloning, maintenance and conjugal transfer of the re-targeted ClosTron vectors. All C. botulinum strains were maintained as frozen stocks at −80°C in TPGY broth (50 g/liter trypticase peptone, 5 g/liter Bacto peptone, 4 g/liter D-glucose, 20 g/liter yeast extract, 1 g/liter cysteine - HCl, pH 7.4) containing 20% glycerol. Bacterial strains were subsequently cultured anaerobically in TPGY. Mating experiments were conducted on nonselective TYG (30 g/liter Bacto Tryptone, 20 g/liter yeast extract, 1 g/liter sodium thioglycollate) (4% agar) media and then spread plated onto selective TYG (1.5% agar) plates supplemented with the appropriate antibiotics. Antibiotics were used at the following concentrations: cycloserine (250 µg/ml), sulfamethoxazole (76 µg/ml), thiamphenicol (15 µg/ml), tetracycline (10 µg/ml), erythromycin (2.5 µg/ml), chloramphenicol (25 µg/ml in agar plates and 12.5 µg/ml in broth). All bacterial media components and chemicals were purchased from Becton Dickinson Microbiology Systems, Sparks, MD and Sigma-Aldrich, St. Louis, MO.
Plasmid tagging using ClosTron
The ClosTron mutagenesis system [20], [21] was used to insertionally inactivate bont/A3, bont/bvB and bont/npB of plasmids pBotCDC-A3 (strain CDC-A3), pCLJ (strain 657Ba) and pCLL (strain Eklund 17B), respectively. The computer algorithm available through the Targetron (group II intron) Design Site (http://www.sigma-genosys.com/targetron/) was used to design the PCR primers listed in Table 1 for intron re-targeting of the selected genes bont/A3, bont/bvB and bont/npB. Primers IBS-580|581s, EBS1d-580|581s, IBS-381|382s, EBS1d-381|382s, IBS-420|421s, EBS1d-420|421s and EBS Universal (Table 1) were purchased from Sigma-Aldrich (St. Louis, MO). A two-step PCR reaction was used to generate the 350 bp re-targeted intron. The first step included two separate PCR reactions: one containing the IBS and EBS universal primers and the other containing the EBS2 and EBS1d primers. The intron PCR template supplied in the Targetron Gene Knockout System kit (Sigma-Aldrich, St. Louis, MO) was used as the DNA template. Five microliters of each PCR product obtained in the first PCR reactions were combined and used as the template in a second PCR reaction containing the IBS and EBS1d primers. PCR reactions were performed using the GeneAmp High Fidelity PCR system (Applied Biosystems, Foster City, CA) under the following conditions: initial hold at 94°C for 30s; followed by 20 cycles of 15s of denaturation at 94°C, 30s of primer annealing at 55°C, and 30s of extension at 72°C and then a final 7 min step at 72°C.
The resulting PCR products of 350 bp representing the re-targeted intron were purified by gel extraction (Qiagen) and cloned into the vector pMTL007C-E2 [21] using restriction endonucleases HindIII and BsrGI by standard cloning techniques [41]. Transformants containing modified ClosTron vectors were selected from E. coli strain DH10B based on chloramphenicol resistance, and plasmid DNA was isolated using a plasmid minipreparation kit (Fermentas Inc., Glen Burnie, MD). Plasmids were analyzed by restriction analysis with HindIII and BsrGI, and the correct sequence of the intron was verified by sequencing using the primer pMTL007-R1 (Table 1). The sequencing primer was purchased from Integrated DNA Technologies, Inc. (Coralville, IA). Sequencing reactions were performed using an ABI PRISM BigDye Cycle Sequencing Ready Reaction kit (Applied Biosystems, Foster City, CA) then purified according to manufacturer's instructions, and analyzed at the University of Wisconsin Biotechnology Center. The nucleotide sequences were aligned and analyzed with sequence analysis software VectorNTI (Invitrogen, Carlsbad, CA). Plasmid DNA from one of the clones containing the correct intron sequence for targeting each BoNT gene was named pMTL007C-E2:Cbo:bont/A-580s (bont/A3), pMTL007C-E2:Cbo:bont/bvB-381s (bont/bvB), and pMTL007C-E2:Cbo:bont/npB-420s (bont/npB) and was transformed into the E. coli conjugation donor strain CA434.
Plasmids pMTL007C-E2:Cbo:bont/A-580s, pMTL007C-E2:Cbo:bont/bvB-381s, and pMTL007C-E2:Cbo:bont/npB-420s were transferred to C. botulinum strains CDC-A3, 657Ba and Eklund 17B, respectively, by conjugation from E. coli donor strain CA434 as previously described [20]. After mating, the bacterial mixture was scraped off of the mating plates, resuspended in 1×PBS (phosphate buffered saline), serially diluted and spread plated onto TYG agar supplemented with cycloserine, sulfamethoxazole (selection of C. botulinum) and thiamphenicol (selection for the vectors). Thiamphenicol resistant colonies were purified by re-streaking onto fresh TYG agar supplemented with thiamphenicol. Individual colonies were re-suspended in 1×PBS, serially diluted and plated onto TYG agar containing erythromycin to select for the presence of the spliced Erm-RAM indicating intron integration. Erythromycin resistant colonies were re-streaked onto fresh TYG agar containing erythromycin. Erythromycin resistant clones were replica plated onto TYG containing thiamphenicol to verify plasmid loss by a thiamphenicol sensitive phenotype.
Chromosomal DNA was isolated from randomly selected erythromycin resistant, thiamphenicol sensitive clones as well as from wild type C. botulinum strains using the ChargeSwitch gDNA kit (Invitrogen, Carlsbad, CA) following the manufacturer's instructions. Screening of the clones was performed by PCR using the gene specific primers A3KMCT1, A3KMCT2 (bont/A3), BVBFCT4, BVBRCT4 (bont/bvB), and NPBFCT11, NPBRCT11 (bont/npB) (Table 1) designed to anneal to regions flanking the site of intron integration. PCR was performed with AmpliTaq High Fidelity DNA polymerase, buffer and dNTPs (Applied Biosystems, Foster City, CA) using a GeneAmp PCR System 9700 (Applied Biosystems) according to manufacturer's instructions. PCR primers were purchased from Integrated DNA Technologies, Inc. (Coralville, IA). PCR products were visualized on 1% Tris-acetate-EDTA gels, stained with ethidium bromide and photographed using a Gel Imaging System (BioRad, Hercules, CA) with UV transillumination. PCR products were purified using a PCR purification kit (Qiagen, Valencia, CA) according to manufacturer's instructions. The nucleotide sequences of the PCR fragments generated from the wild type and the transconjugant clones were determined using the same primers as for the amplication of the DNA fragments (Table 1). The nucleotide sequences were analyzed as described above.
Tn916 Mutagenesis
C. botulinum strain Hall A-hyper was chosen for Tn916 mutagenesis to generate tetracycline resistant strains. The genome sequence of Hall A-hyper is completed (GenBank Acc: CP000727). This strain does not contain any plasmids. Tn916 mutant clones of Hall A-hyper were generated using the methods for Tn916 mutagenesis described in Lin and Johnson [22]. This strain containing a tetracycline resistance marker was used as an alternative recipient in the bacterial mating experiments with donors CDC-A3 and 657Ba.
Mating experiments
Donor and recipient strains were inoculated into TPGY broth from frozen stocks and incubated anaerobically overnight. The strains were subcultured into TPGY containing 2.5 µg/ml erythromycin (donors) and 10 µg/ml tetracycline (recipients). The donors and recipients were passed again in TPGY broth supplemented with antibiotics and incubated anaerobically for 12 h. Each strain was serially diluted to ∼104 to 105 CFU/ml in TPGY broth and incubated until an OD600nm of 0.6 to 0.8. Matings between donors and recipients were performed on solid nonselective 4% TYG agar. Three different donor to recipient ratios (5∶1, 1∶1 and 1∶5) were tested. Aliquots of 1 ml or 200 µl of donor (D) and recipient (R) cells were centrifuged at 3,000×g for 5 min and resuspended in 200 µl of recipient or donor cells, respectively, and spread plated onto 4% TYG agar. The mating plates were incubated right side up for 12 h at 37°C or 30°C depending on the optimal growth temperature of the donor cells. Separate plates spread plated with 200 µl of donor and recipient cells were also included as controls. Sensitivity of plasmid transfer to DNaseI was tested by treating 1 ml of donor cells with DNaseI (100 µg/ml) in a buffer containing 20 mM Tris-HCl, pH 7.5, 1 mM MgCl2 and 1 mM MgSO4 for 37°C for 60 minutes [42]. On the nonselective agar plate 25 µl of DNaseI (10 mg/ml) and 50 µl of 50 mM MgSO4 were added, spread evenly and the plates were incubated at room temperature for 60 minutes. Donor cells incubated for 60 min with DNaseI, were spun down at 3,000×g for 5 min. The supernatant was discarded and the cell pellet was re-suspended in 200 µl of the recipient strain. DNaseI (100 µg/ml) and 1 mM MgSO4 were added to the cell mixture and the cells were spread plated onto the TYG agar supplemented with DNaseI and MgSO4. The plates were incubated at 37°C for 12 h.
Mating experiments were also performed by separating the donor and recipient cells with a 0.45 µm nitrocellulose membrane to determine if cell-to-cell contact is required for plasmid transfer. In these experiments 200 µl of the donor cell suspensions were spotted in the middle of the plate and spread slightly, and plates incubated until all moisture was absorbed. Then nitrocellulose membrane was placed on top of the donor cells, the plates incubated until the membrane completely adhered to the agar, followed by spreading the recipient cells in the middle of the membrane. The mating plates were incubated right side up for 12 hours at 37°C or 30°C. The recipient cells were then scraped off the surface of the membrane using cell scrapers, the cells were resuspended in the PBS and plated on selective plates.
To assess the possible involvement of bacteriophages in plasmid transfer, donor cell cultures were passed through a 0.45 µm filter (Millipore) and mixed 1∶1 with the recipient cell culture [43]. CaCl2 (1mM) was added and the mixture was incubated for 12 h at 37°C.
Following matings the controls and mating mixtures were scraped off of the TYG agar plates and re-suspended in 3 ml of sterile 1×PBS, serially diluted and plated in duplicate on TYG agar supplemented with tetracycline and erythromycin for selection of the transconjugants. Serial dilutions were also spread plated onto TYG supplemented with tetracycline for enumeration of recipients and transconjugants and TYG containing eythromycin for enumeration of donors and transconjugants. The plates were incubated anaerobically for 3 days at 30°C or 37°C. The plasmid transfer frequency was calculated as the number of transconjugants per number of donor cells in matings in which the number of donors was greater than the number of recipients. Transfer frequencies were calculated as the number of transconjugants per number of recipient cells when the recipient counts were greater than the donor cell counts.
Colonies resistant to both tetracycline and erythromycin were re-streaked for isolation onto fresh TYG agar supplemented with tetracycline and erythromycin and kept for further analysis.
Pulsed-field gel electrophoresis
Confirmation of plasmid transfer was performed by pulsed-field gel electrophoresis (PFGE) of nondigested and digested DNA of the transconjugant, donor and recipient strains. C. botulinum strains were inoculated into 10 ml of TPGY and incubated anaerobically at 37°C (proteolytic strains) or 30°C (nonproteolytic strains) to an optical density at 600 nm (OD600) of 0.6. One milliliter of formaldehyde (Fisher Scientific, Hampton, NH) was added, and the cultures were placed on ice for 15 to 30 minutes to inhibit nuclease activity. PFGE plugs were prepared as described by Johnson et al. [44].
To increase the visualization of plasmids, pBotCDC-A3-Erm, pCLJ-Erm and pCLL-Erm in the LNT01 transconjugant clones, restriction digests of PFGE plugs were performed using restriction endonucleases chosen to linearize each plasmid. The nucleotide sequences of each plasmid were analyzed using VectorNTI version 10.3 (Invitrogen, Carlsbad, CA) and a rare cutting restriction enzyme that cleaves the plasmid once was selected. Restriction enzymes SmaI, XhoI and NarI (New England Biolabs), were selected to digest the PFGE plugs of LNT01 transconjugants to assess the presence of plasmids pBotCDC-A3-Erm, pCLJ-Erm and pCLL-Erm, respectively. Restriction digests of the PFGE plugs were performed according to the manufacturer's instructions (New England Biolabs). Two sets of nondigested and digested DNA samples were loaded on the same gel and DNA samples were separated by PFGE in a clamped homogenous electric field system (CHEF-DRII; Bio-Rad, Hercules CA). After the DNA was transferred onto the nylon membrane, the filter was cut in a half, and each portion contained one set of undigested and digested DNA samples. One membrane was hybridized with a neurotoxin gene specific probe, while the other with an erythromycin gene probe.
Southern Hybridizations
Primers for generation of hybridization probes for ermB (ErmF and ErmR); bont/A3 (A3KMCT1 and A3KMCT2); bont/bvB and bont/npB (AnyB-F and AnyB-R) are listed in Table 1. These gene probes were generated by PCR amplification with an AmpliTaq High Fidelity DNA polymerase, buffer and dNTPs (Applied Biosystems, Foster City, CA) using a GeneAmp PCR System 9700 (Applied Biosystems) according to the manufacturer's instructions. The PCR products were purified from agarose gels using the Qiagen gel extraction kit (Qiagen, Valencia, CA), and were radioactively labeled with [α-32P] ATP using the Megaprime DNA labeling system (GE Healthcare Bio-Sciences, Piscataway, NJ).
The DNA samples separated by PFGE were transferred to a positively charged nylon membrane (Immobilon-NY+, Millipore, Bedford, MA) overnight by downward capillary transfer in 0.4 M NaOH, 1.5 M NaCl. The membranes were neutralized in 2 M Tris-HCl, pH 7.0 for 15 minutes, rinsed with 2×SSC (3M NaCl, 0.3M sodium citrate) and fixed at 80°C for 30 minutes under vacuum.
Hybridizations were performed at 42°C for 16 h in a solution containing 5× Denhardt's Solution, 6×SSPE, 50% formamide, 0.1% SDS, 100 µg/ml herring sperm DNA (Promega, Madison, WI) and 32P-labeled probes at ∼2×106 cpm/ml. All hybridization solutions and buffers were prepared according to standard protocols [41]. After hybridizations the membranes were washed twice with 2×SSPE, 0.1% SDS for 5 min each at room temperature and twice with 0.1×SSPE, 0.1% SDS for 30 min each at 42°C. Autoradiography of the membranes was performed for 6–24 h at −70°C using Kodak BioMax MS film with a BioMax intensifying screen (Eastman Kodak, Rochester, NY).
Plasmid Alignments
Plasmid sequence alignments were performed to determine the relatedness of the plasmid pCLL [Acc. No. CP001057] in C. botulinum strain Eklund 17B to plasmids, pCP13 [Acc. No. P003515] of C. perfringens strain 13, pCW3 [Acc No. DQ366035] of C. perfringens strain CW92, pCP8533etx [Acc. No. AB444205] of C. perfringens strain NCTC8533B4D, and two contigs, gcontig_1108490430999 [Acc. No. ABOO01000010.1] and gcontig_1108490430283 [Acc. No ABOO01000017] of C. perfringens type D strain JGS1721. Plasmid sequence files with annotations were obtained from NCBI. Plasmid alignments were conducted using progressive alignment option of Mauve 2.3.1 [29] with the default settings. Figures 7 and 8 were generated using the Mauve alignment viewer, which illustrates locally collinear blocks (LCBs) as regions without rearrangements in the homologous backbone sequence. LCBs below a plasmid's center line represent the reverse complement orientation relative to the reference genome (pCP13, Fig. 7; pCLL, Fig. 8). Sequence similarity plots are displayed in the LCBs, and the height of the sequence identity plot reflects the average column entropy for the region of the respective alignment. The NCBI blastp tool was used to compare the amino acid sequences of the pCLL ORFs with ORFs in C. perfringens strains.
Author Contributions
Conceived and designed the experiments: KMM MB EAJ. Performed the experiments: KMM MB. Analyzed the data: KMM MB EAJ. Contributed reagents/materials/analysis tools: KMM MB. Wrote the paper: KMM MB EAJ.
References
- 1. Arndt JW, Jacobson MJ, Abola EE, Forsyth CM, Tepp WH, et al. (2006) A structural perspective of the sequence variability within botulinum neurotoxin subtypes A1-A4. J Mol Biol 362: 733–742.
- 2. Carter AT, Paul CJ, Mason DR, Twine SM, Alston MJ, et al. (2009) Independent evolution of neurotoxin and flagellar genetic loci in proteolytic Clostridium botulinum. BMC Genomics 10: 115.
- 3. Dover N, Barash JR, Arnon SS (2009) Novel Clostridium botulinum toxin gene arrangement with subtype A5 and partial subtype B3 botulinum neurotoxin genes. J Clin Microbiol 47: 2349–2350.
- 4. Hill KK, Smith TJ, Helma CH, Ticknor LO, Foley BT, et al. (2007) Genetic diversity among botulinum neurotoxin-producing clostridial strains. J Bacteriol 189: 818–832.
- 5. Smith TJ, Lou J, Geren IN, Forsyth CM, Tsai R, et al. (2005) Sequence variation within botulinum neurotoxin serotypes impacts antibody binding and neutralization. Infect Immun 73: 5450–5457.
- 6.
Marshall KM (2009) Ph.D. Thesis: Identification and characterization of virulence plasmids in Clostridium botulinum. University of Wisconsin-Madison, Madison, WI.
- 7. Hatheway CL (1990) Toxigenic Clostridia. Clin Microbiol Rev 3: 66–98.
- 8. Hill KK, Xie G, Foley BT, Smith TJ, Munk AC, et al. (2009) Recombination and insertion events involving the botulinum neurotoxin complex genes in Clostridium botulinum types A, B, E and F and Clostridium butyricum type E strains. BMC Biol 7: 66.
- 9. Peck MW (2009) Biology and Genomic Analysis of Clostridium botulinum. Adv Microb Physiol 55: 183–320.
- 10. Lynt RK, Kautter DA, Solomon HM (1982) Differences and similarities among proteolytic and non-proteolytic strains of Clostridium botulinum types A, B, E and F (A Review). J Food Protection 45: 466–474.
- 11. Schiavo G, Matteoli M, Montecucco C (2000) Neurotoxins affecting neuroexocytosis. Physiol Rev 80: 717–766.
- 12.
Johnson EA, Montecucco C (2008) Botulism. In: Aminof MJ, Boller F, Swaab DF, editors. Handbook of Clinical Neurology Volume 91: Neuromuscular Junction Disorders (Engel, AG, ed). Elsevier Science. pp. 333–368.
- 13.
Ward AB, Barnes MP (2007) Clinical Uses of Botulinum Toxins. Cambridge: Cambridge University Press.
- 14. Sakaguchi Y, Hayashi T, Kurokawa K, Nakayama K, Oshima K, et al. (2005) The genome sequence of Clostridium botulinum type C neurotoxin-converting phage and the molecular mechanisms of unstable lysogeny. Proc Nat Acad Sci USA 102: 17472–17477.
- 15. Zhou Y, Sugiyama H, Nakano H, Johnson EA (1995) The genes for the Clostridium botulinum type G toxin complex are on a plasmid. Infect Immun 63: 2087–2091.
- 16.
Bradshaw M, Johnson EA (2010) Genetic Manipulation of Clostridium. In: Baltz RH, Demain AL, Davies JE, editors. Manual of Industrial Microbiology and Biotechnology, 3rd ed. Washington, DC: ASM Press. pp. 238–261.
- 17. Marshall KM, Bradshaw M, Pellett S, Johnson EA (2007) Plasmid encoded neurotoxin genes in Clostridium botulinum serotype A subtypes. Biochem Biophys Res Commun 361: 49–54.
- 18. Franciosa G, Maugliani A, Scalfaro C, Aureli P (2009) Evidence that plasmid-borne botulinum neurotoxin type B genes are widespread among Clostridium botulinum serotype B strains. PLoS One 4: e4829.
- 19. Umeda K, Seto Y, Kohda T, Mukamoto M, Kozaki S (2009) Genetic characterization of Clostridium botulinum associated with type B infant botulism in Japan. J Clin Microbiol 47: 2720–2728.
- 20. Heap JT, Pennington OJ, Cartman ST, Carter GP, Minton NP (2007) The ClosTron: a universal gene knock-out system for the genus Clostridium. J Microbiol Methods 70: 452–464.
- 21. Heap JT, Kuehne SA, Ehsaan M, Cartman ST, Cooksley CM, et al. (2010) The ClosTron: Mutagenesis in Clostridium refined and streamlined.f J Microbiol Methods 80: 49–55.
- 22. Lin WJ, Johnson EA (1991) Transposon Tn916 mutagenesis in Clostridium botulinum. Appl Environ Microbiol 57: 2946–2950.
- 23. Johnson EA, Lin WJ, Zhou YT, Bradshaw M (1997) Characterization of neurotoxin mutants in Clostridium botulinum type A. Clin Infect Dis 25: Suppl 2S168–170.
- 24. Smith TJ, Hill KK, Foley BT, Detter JC, Munk AC, et al. (2007) Analysis of the neurotoxin complex genes in Clostridium botulinum A1–A4 and B1 strains: BoNT/A3, /Ba4 and /B1 clusters are located within plasmids. PLoS One 2: e1271.
- 25. Hughes ML, Poon R, Adams V, Sayeed S, Saputo J, et al. (2007) Epsilon-toxin plasmids of Clostridium perfringens type D are conjugative. J Bacteriol 189: 7531–7538.
- 26. Rood JI, Scott VN, Duncan CL (1978) Identification of a transferable tetracycline resistance plasmid (pCW3) from Clostridium perfringens. Plasmid 1: 563–570.
- 27. Brynestad S, Sarker MR, McClane BA, Granum PE, Rood JI (2001) Enterotoxin plasmid from Clostridium perfringens is conjugative. Infect Immun 69: 3483–3487.
- 28. Beverley SM (1988) Characterization of the ‘unusual’ mobility of large circular DNAs in pulsed field-gradient electrophoresis. Nucleic Acids Res 16: 925–939.
- 29. Darling AC, Mau B, Blattner FR, Perna NT (2004) Mauve: multiple alignment of conserved genomic sequence with rearrangements. Genome Research 14: 1394–1403.
- 30.
Rood J (2004) Virulence Plasmids of Spore-Forming Bacteria. In: Funnell BE, Phillips JG, editors. Plasmid Biology. Washington D.C.: ASM Press. pp. 413–422.
- 31. Bannam TL, Teng WL, Bulach D, Lyras D, Rood JI (2006) Functional identification of conjugation and replication regions of the tetracycline resistance plasmid pCW3 from Clostridium perfringens. J Bacteriol 188: 4942–4951.
- 32. Sebaihia M, Peck MW, Minton NP, Thomson NR, Holden MT, et al. (2007) Genome sequence of a proteolytic (Group I) Clostridium botulinum strain Hall A and comparative analysis of the clostridial genomes. Genome Res 17: 1082–1092.
- 33. Dineen SS, Bradshaw M, Johnson EA (2000) Cloning, nucleotide sequence, and expression of the gene encoding the bacteriocin boticin B from Clostridium botulinum strain 213B. Appl Environ Microbiol 66: 5480–5483.
- 34. Jacobson MJ, Lin G, Whittam TS, Johnson EA (2008) Phylogenetic analysis of Clostridium botulinum type A by multi-locus sequence typing. Microbiology 154: 2408–2415.
- 35. Smedley JG, Fisher DJ, Sayeed S, Chakrabarti G, McClane BA (2005) The enteric toxins of Clostridium perfringens. Rev Physiol Biochemi Pharm 152: 183–204.
- 36. Sayeed S, Li J, McClane BA (2007) Virulence plasmid diversity in Clostridium perfringens type D isolates. Infect Immun 75: 2391–2398.
- 37. Wang XM, Maegawa T, Karasawa T, Kozaki S, Tsukamoto K, et al. (2000) Genetic analysis of type E botulinum toxin-producing Clostridium butyricum strains. Appl Environ Microbiol 66: 4992–4997.
- 38. Hatheway CL, McCroskey LM, Lombard GL, Dowell VR (1981) Atypical toxin variant of Clostridium botulinum type-B associated with infant botulism. J Clin Microbiol 14: 607–611.
- 39. Eklund MW, Wieler DI, Poysky FT (1967) Outgrowth and toxin production of nonproteolytic type B Clostridium botulinum at 3.3 to 5.6°C. J Bacteriol 93: 1461–1462.
- 40. Bradshaw M, Dineen SS, Maks ND, Johnson EA (2004) Regulation of neurotoxin complex expression in Clostridium botulinum strains 62A, Hall A-hyper, and NCTC 2916. Anaerobe 10: 321–333.
- 41.
Sambrook J, MacCallum P, Russell D (2001) Molecular Cloning: A Laboratory Manual. (Third Eddition). CSHL Press.
- 42. Neve H, Geis A, Teuber M (1984) Conjugal transfer and characterization of bacteriocin plasmids in group N (lactic acid) streptococci. J Bacteriol 157: 833–838.
- 43. Blaiotta G, Ercolini D, Simeoli E, Moschetti G, Villani F (2000) Conditions for conjugative transposon transfer in Lactococcus lactis. Lett Appl Microbiol 31: 343–348.
- 44. Johnson EA, Tepp WH, Bradshaw M, Gilbert RJ, Cook PE, et al. (2005) Characterization of Clostridium botulinum strains associated with an infant botulism case in the United Kingdom. J Clin Microbiol 43: 2602–2607.